10.3 inch 1872x1404p E Paper HDMI Monitor for PC Jetson Nano Raspberry Pi

£351.49 Buy It Now, £7.12 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: electronicstudio ✉️ (611) 99.3%, Location: Gråbo, SE, Ships to: WORLDWIDE, Item: 115532878200 10.3 inch 1872x1404p E Paper HDMI Monitor for PC Jetson Nano Raspberry Pi.

 

This is a bicolor (black & white) 10.3-inch e-Paper monitor with an HDMI interface. The screen resolution of this monitor is 1872x1404 pixels and it works with Raspberry Pi, NVIDIA, Jetson Nano, and Personal Computers (PCs with HDMI port). The enclosure around the display is made of CNC aluminum alloy.

Working Principle of 10.3-inch Eye Care e-Paper HDMI Monitor

It is due to the use of a new technology that this monitor doesn’t cause stress on your eyes. The working principle of the 10.3-inch e-Paper HDMI monitor uses the Microcapsule Electrophoretic Technology. The best thing about this MET display technology is that it doesn’t use the blue light. This is how it works:

·         The clear fluid has suspended particles as long as there is no electric field

·         When the electric field runs through the fluid, the suspended particles start moving towards the edges of the microcapsule

·         The microcapsule then becomes visible through the reflection of the ambient light

·         Unlike the electronic display of the conventional display units, this e-Paper monitor displays content as if it is printed on the paper

Features of Eye Care 10.3-inch 1872x1404p e-Paper HDMI Monitor

·         Brand: Waveshare

·         The monitor doesn’t use the Active Light Emission and it doesn’t cause stress on the eyes because this monitor doesn’t use the blue light

·         Resolution: 1872 x 1404 pixels | 225DPI

·         Passive Reflective Display

·         5V / 1.4A Power Input Supported

·         Compatible with Raspberry Pi and NVIDIA Jetson Nano

·         Works with Personal Computers as long as the PC has an HDMI port

·         MENU Button for contrast configuration across 10 levels

·         UPD/RUN Switch

·         CNC aluminum alloy for screen enclosure

·         Interface Type: HDMI

·         View Angle: Up to 180o

·         Uses the FPGA Refresh Technology for Quick Response and Low latency

·         Supports three modes including A2+, A2, and CG16. You can configure these modes through the ‘M’ button

·         Easily configure and safe settings after tuning the monitor as you please

·         Low refresh rate, approx. 5Hz on the A2 Mode. It is the most suitable mode for study, coding, office applications, web browsing, document editing, and creating spreadsheets

·         The monitor doesn’t feature the active light emission

Note

·         By default, the switch on the 10.3-inch e-Paper monitor is on the RUN mode which indicates that the power port is close. You can switch to the UPD mode in the case of contrast adjustment and firmware updates.

·         The 10.3-inch e-Paper monitor DOES NOT work at its best with the VGA analog signals. If the video format is VGA then the display shows signs of flickering.

·         In the case of gaming and HD video streaming, this monitor needs a high refresh rate and this is why it operates as an LED

Interfaces and Buttons on 10.3-inch E-Paper HDMI Monitor

·         Power indicator

·         Interface for 5V power supply

·         Mode Switch (M)

·         Screen Refresh (C)

·         RUN/UPD Switch

·         Mini HDMI Port

·         MENU/+/Contrast Adjustment

Dimensions of 10.3-inch E-Paper HDMI Monitor

Display Dimensions: 209.7mm x 157.2mm | 20.97cm x 15.72cm

 

Outline Dimensions: 238mm x 187mm x 8.9mm | 23.8cm x 18.7cm x 0.89cm

 

10.3 inch 1872x1404p E Paper HDMI Monitor for PC Jetson Nano Raspberry Pi The 10.3-inch e-Paper Monitor is compatible with a PC (with HDMI port), Raspberry Pi, and NVIDIA Jetson Nano. The resolution of the screen is 1872x1404 pixels. This monitor uses the Microcapsule Electrophoretic Technology. This technology doesn’t use blue light. It means that your eyes don’t feel the stress that is caused when sitting in front of conventional electronic displays for a long time. Paper-Like Experience that is Better for Your Eyes Following is the working principle of the 10.3-inch e-Paper HDMI Monitor: In absence of the electric field, the charged particles stay suspended within the clear fluid As soon as the electric field turns on, the particles move towards the edges of the microcapsule The ambient light reflection makes the microcapsule visible The display is similar to that of the ink printed on the paper Features of Eye Care 10.3 inch 1872x1404p E-Paper HDMI Monitor Display Quality: 225DPI 1872 x 1404 pixels No blue light means that the eyes don’t suffer from stress even if sitting in front of the monitor for a long time Passive Reflective Display 10 Contrast Options configurable via the MENU button on the monitor Screen Enclosure is made of the aluminum alloy with CNC finishing Works with NVIDIA Jetson Nano, Raspberry Pi, and PC (the PC must have an HDMI port) Power Input: 5V / 1.4A Supported HDMI interface RUN/UPD Switch Up to 180o View Angle FPGA Refresh Technology – Low latency and Quick Response Supports A2, GC16, and A2+ Modes. You can select the mode by using the M button on the monitor You can tune for the most suitable settings and save configurations for the monitor Approximately 5Hz (low refresh rate) on A2 Mode. Using the A2 mode is recommended for study, office applications, document editing, coding, web browsing, and creating spreadsheets No active light emission. Your eyes don’t undergo the familiar stress caused by the active light emission and blue light Field Programmable Gate Array (FPGA) Block Low Latency & Quick Response - Fast Refresh Technology Examples of How to Connect the Screen Connection with Raspberry Pi 4 Connection with Laptop Compatible with Smartphone Full Screen Desktop Mode Compatible with Huawei (EMUI) and Samsung (DEX) Smartphone Full Screen Desktop Display Mode Note The switch is on the RUN mode by default which means that the power port is closed. You can turn the switch to UPD mode in the case of the firmware update and contrast adjustment The monitor isn’t compatible with the VGA analog signals. If the format is VGA, the display might flicker If you are streaming media or playing games using this monitor, it will need a higher refresh rate and it works as an LED in this case Interfaces and Buttons on 10.3-inch E-Paper HDMI Monitor (C) Screen Refresh (M) Mode Switch Power Indicator RUN/UPD Switch MENU/+/Contrast Adjustment Mini HDMI Port 5V Power Supply Interface Dimensions of 10.3-inch E-Paper HDMI Monitor Edge-to-Edge Dimensions of the Monitor: 23.8cm x 18.7cm x 0.89cm | 238mm x 187mm x 8.9mm Dimensions of the Display: 20.97cm x 15.72cm | 209.7mm x 157.2mm Items Included 3-inch E-Paper HDMI Monitor (1) 5V / 3A Power Supply – EU Plug (1) HDMI to Micro HDMI Adapter (1) HDMI Cable (1)

10.3 inch 1872x1404p E Paper HDMI Monitor for PC Jetson Nano Raspberry Pi

The 10.3-inch e-Paper Monitor is compatible with a PC (with HDMI port), Raspberry Pi, and NVIDIA Jetson Nano. The resolution of the screen is 1872x1404 pixels. This monitor uses the Microcapsule Electrophoretic Technology.

This technology doesn’t use blue light. It means that your eyes don’t feel the stress that is causéd when sitting in front of conventional electronic displays for a long time.

Paper-Like Experience that is Better for Your Eyes

Following is the working principle of the 10.3-inch e-Paper HDMI Monitor:

  • In absence of the electric field, the charged particles stay suspended within the clear fluid
  • As soon as the electric field turns on, the particles move towards the edges of the microcapsule
  • The ambient light reflection makes the microcapsule visible
  • The display is similar to that of the ink printed on the paper

Features of Eye Care 10.3 inch 1872x1404p E-Paper HDMI Monitor

  • Display Quality: 225DPI 1872 x 1404 pixels
  • No blue light means that the eyes don’t suffer from stress even if sitting in front of the monitor for a long time
  • Passive Reflective Display
  • 10 Contrast Options configurable via the MENU button on the monitor

  • Screen Enclosure is made of the aluminum alloy with CNC finishing
  • Works with NVIDIA Jetson Nano, Raspberry Pi, and PC (the PC must have an HDMI port)
  • Power Input: 5V / 1.4A Supported
  • HDMI interface
  • RUN/UPD Switch
  • Up to 180o View Angle
  • FPGA Refresh Technology – Low latency and Quick Response
  • Supports A2, GC16, and A2+ Modes. You can select the mode by using the M button on the monitor

  • You can tune for the most suitable settings and save configurations for the monitor
  • Approximately 5Hz (low refresh rate) on A2 Mode. Using the A2 mode is recommended for study, office applications, document editing, coding, web browsing, and creating spreadsheets
  • No active light emission. Your eyes don’t undergo the familiar stress causéd by the active light emission and blue light
Field Programmable Gate Array (FPGA) Block Low Latency & Quick Response - Fast Refresh Technology

Examples of How to Connect the Screen

Connection with Raspberry Pi 4

Connection with Laptop

Compatible with Smartphone Full Screen Desktop Mode Compatible with Huawei (EMUI) and Samsung (DEX) Smartphone Full Screen Desktop Display Mode

Note
  • The switch is on the RUN mode by default which means that the power port is closed. You can turn the switch to UPD mode in the case of the firmware update and contrast adjustment
  • The monitor isn’t compatible with the VGA analog signals. If the format is VGA, the display might flicker
  • If you are streaming media or playing games using this monitor, it will need a higher refresh rate and it works as an LED in this case

Interfaces and Buttons on 10.3-inch E-Paper HDMI Monitor

  • (C) Screen Refresh
  • (M) Mode Switch
  • Power Indicator
  • RUN/UPD Switch
  • MENU/+/Contrast Adjustment
  • Mini HDMI Port
  • 5V Power Supply Interface

Dimensions of 10.3-inch E-Paper HDMI Monitor

  • Edge-to-Edge Dimensions of the Monitor: 23.8cm x 18.7cm x 0.89cm | 238mm x 187mm x 8.9mm
  • Dimensions of the Display: 20.97cm x 15.72cm | 209.7mm x 157.2mm

Items Included

  • 3-inch E-Paper HDMI Monitor (1)
  • 5V / 3A Power Supply – EU Plug (1)
  • HDMI to Micro HDMI Adapter (1)
  • HDMI Cable (1)
× × × × × × × ×

Buy now and save! Tell a friend Visit store Watch now

Postage info

Click the Postage tab above the listing description for more info

Click the Postage tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYING VIA PAYPAL

We accept PayPal on our all our items so you can shop with confidence.

Simple choose the PayPal option when proceeding through the checkout.

Additional Information

No additional information at this time

Ask seller a question

You might also like

Arduino Dock R2 5V ATmega328P Omega2 30Pin Header Micro USB Type A USB

Ethernet Expansion for Onion Omega 100MBs RJ45 Ethernet Port

GPS Expansion for Onion Omega with GPS Antenna NEO 6M 6 Positioning Engine Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© makerelectronics

Postage

Click the Postage tab above the listing description for more info

Payment

Accepted Payment Methods

  • PayPal
Returns

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.

eBay integration by
  • Condition: New
  • Brand: Waveshare

PicClick Insights - 10.3 inch 1872x1404p E Paper HDMI Monitor for PC Jetson Nano Raspberry Pi PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 556 days for sale on eBay. 0 sold, 5 available.
  •  Best Price -
  •  Seller - 611+ items sold. 0.7% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive