1. Computers/Tablets & Networking
  2. Computer Cables & Connectors
  3. Parallel, Serial & PS/2

  4. USB to Parallel 36 Pin Centronics Printer Cable Lead for Epson & HP 85cm

USB to Parallel 36 Pin Centronics Printer Cable Lead for Epson & HP 85cm 1 of 2FREE ShippingUSB to Parallel 36 Pin Centronics Printer Cable Lead for Epson & HP 85cm 2 2 of 2 See More
See Details on eBay available at Amazon

USB to Parallel 36 Pin Centronics Printer Cable Lead for Epson & HP 85cm

£5.23 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: northeast-cables ✉️ (72,249) 99.8%, Location: Gateshead, GB, Ships to: GB & many other countries, Item: 252301839467 USB to Parallel 36 Pin Centronics Printer Cable Lead for Epson & HP 85cm. . FULL INSTRUCTIONS ON THE BOTTOM OF THE PAGE This unique cable adapter allows you to attach your computer to any parallel printer device through the USB port and get faster printing results Connect your printer to any USB port with this USB to 36 pin parallel Centronics port data cable Compatible with USB 1.0, 1.1 & 2.0 Bi-directional communication between PC and 36-pin parallel port printer Ideal solution for laptop PCs or desktops without parallel port for older printers Easy installation and no setup or configuration needed Supported printers include inkjet and laser printers from HP, Lexmark, Epson, Canon and all other compatible clones PLEASE NOTE THIS CABLE IS NOT GUARANTEED TO WORK WITH ALL PRINTERS SO PLEASE BE AWARE OF THIS WHEN YOU PURCHASE YOU MAY RETURN AT YOUR OWN EXPENSE IF THE CABLE IS NOT SUITABLE FOR YOUR NEEDS Compatible with Windows 98, Windows Me, Windows 2000, Windows XP, Windows 7 Cable Length: Approx. 85cm/ Package Included: 1 x 1M USB to Parallel 36 Pin Centronics Printer Cable Installation: Let's start off with a clean setup and go through the whole process. So make sure everything is unplugged and that the printer is not already listed in the Printers and Faxes menu (just called the printers menu in Vista). Before we get started, please check the two following things: 1. Make sure that the cable you have has the correct type of connection to be connected to your printer. 2. Make sure that your printer does not have a built in copier, scanner, or fax function. If your printer does have these types of functions it will not work with a USB to Parallel cable. Once we're set on those things, then start here: 1. While the computer is turned on, plug the USB to Parallel cable into the computer only. (Do not have it connected to the printer) 2. Wait a couple minutes and then plug the cable into the printer. 3. Go into the Printers and Faxes menu again and see if your printer has been installed automatically. If it has, try printing. If it hasn’t, continue on with step 4. 4. Click add a printer. (The following steps should be the same for Windows XP and Vista.) 5. Click Next. Then select Local Printer. Do not have it automatically detect and install your printer. Then click next again. 6. Under the section, Use the following port: select the port USB001 (Virtual printer port for USB). (if you have other USB printers installed on your computer you may need to select USB002 or USB003 depending on your setup) Then click next. 7. Select your printer brand and model from the list that comes up and click next. 8. If it asks, tell it to replace existing driver. Then name the printer and select if you want it to be the default printer. 9. If you would like you can have it share the printer. Then tell it to print a test page and finish the setup. As long as the printer prints at that point, it should be all configured and ready to work. Troubleshooting: If your printer has already been connected and isn't working, or if it's stopped working for some reason take a look at these suggestions. First off, you'll want to make sure that it get's reinstalled properly. Follow these steps: 1. Unplug the USB to Parallel cable from both the computer and the printer. 2. Go into the Printers and Faxes menu and delete the printer from the menu. 3. Reboot the computer. Then go back up and go through the installation steps to make sure it get's set up properly. If this isn't helping check the following: In the ports section of the printer properties there are two options, Enable Bi-directional Support and Enable Printer pooling. Make sure neither of those are selected and click OK. If your computer shows multiple USB00# ports in the ports section of the properties, you may need to try each of the different ports to see if it will print. Select a different port and click OK. Then you'll want to remove all pending documents from the queue and reboot your computer. Once the computer reboots try printing again. Please note these cables are simply push fitted together on the centronics end if you experience the two clam shell covers drifting apart simply apply a couple of drops of super glue to solve any issues you may have with it ,this is not a bad quality item it is simply the way manufacturers all join the two half's together.
  • Condition: New
  • Features: Round Cable
  • Manufacturer Warranty: 3 Months
  • Connector B: Parallel (IEEE 1284) Male
  • Compatible Model: Universal
  • Unit Type: Unit
  • Item Length: 1m
  • Country/Region of Manufacture: China
  • Connection Split/Duplication: 1:1
  • Colour: Black
  • Compatible Brand: universal printer cable
  • Connector A: usb a male
  • Unit Quantity: 1
  • Brand: CabledUp®
  • Cable Length: 1m cable
  • Type: Adapter/Converter

PicClick Insights - USB to Parallel 36 Pin Centronics Printer Cable Lead for Epson & HP 85cm PicClick Exclusive

  •  Popularity - 70 watchers, 0.0 new watchers per day, 2,971 days for sale on eBay. Super high amount watching. 1,476 sold, 10 available.
  •  Best Price -
  •  Seller - 72,249+ items sold. 0.2% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive