please don't hesitate! Free Ship by UPS!
This Item includes:
3PCS Nema23 Stepper Motor 57BYGH627 3.0A 270oz-in 76mm 1PC 3 Axis Driver Board Tb6560 1PC Power Supply 350W 24V
1, Stepper Motor
Technical Specifications
2, 3 Axis Driver Board TB6560
Products Features : 1 : The maximum 3.5A drive current to a maximum 86 stepper motor drives, more powerful
2 : 1-16 sub-setting, higher accuracy, smoother operation
3 : Overload over-current over-temperature protection, full protection of your computer and peripheral equipment
4 : 4 files current settings can be set according to the user the actual current requirement
5 : Full closed-type optical isolation to protect the user's computer and equipment
6 : Professional design, two-stage signal processing, super anti-jamming 7: Bipolar constant current chopper drive motor low-speed non-creeping phenomenon, noise, non-resonant region 。
8: 2-way output control, scalable fifth axis or 2-way control of external equipment.
9: Four input control, you can set limit, emergency stop, which is divided into pairs of knives.
Please note the following before the test items
1, To determine the size of the supply voltage and current
2, Determine the stepper motor power and current (model)
3, Determine the stepper motor wiring
4 , Power Please take 12 ~ 36V 8A (stepper motor in accordance with the work of current matching) The above switching power supply, I received a map indicating the power input interface 。
12V power output for a 12V cooling fan to pick up where 。
The definition of 1-PIN 25 of Parallel Interface is described as follows :
PIN9 | PIN14 | PIN7 | PIN1 | PIN2 | PIN3 | PIN8 | PIN6 | PIN4 | PIN5 | PIN16 | PIN17 |
spindle motor | X Empower | X Dir | X Step | Y Empower | Y Dir | Y Step | Z Empower | Z Dir | Z Step | Expand output 1 | Expand output2 |
The definition of 1-PIN15 of Manual Interface is described as follow ( Click the image to upper right for the P1 left P15 )
P1 | P2 | P3 | P4 | P5 | P6 | P7 | P8 | P9 | P10 | P11 | P12 | P13 | P14 | P15 |
X Step | X Empowe | spind | X Dir | Y Empowe | Z Dir | Z Step | Z Empowe | Y Limit | Z Limit | Y Dir | Y Step | STOP | GND | 5v/VDD |
Limit Switch Description
Input 1 | Input 2 | Input 3 | Input 4 |
Corresponding parallel P10 | Corresponding parallel P11 | Corresponding parallel P12 | Corresponding parallel P13 |
Output Interface Definition :
P1 | P2 | P3 | P4 | P5 | P6 | P7 | P8 | P9 | P10 | P11 | P12 | P13 | P14 | P15 | P16 | P17 |
VDD | GND | XA+ | XA- | XB+ | XB- | YA+ | YA- | YB+ | YB- | ZA+ | ZA- | ZB+ | ZB- | MO/V+ | GND | MO - |
3, 350W ,24VDC Power Supply
Index Type | S-350-5 | S-350-7.5 | S-350-12 | S-350-15 | S-350-24 | S-350-27 | S-350-48 |
DC Voltage | 5V | 7.5V | 12V | 15V | 24V | 27V | 48V |
Voltage Tolerance | ± 2% | ± 2% | ± 1% | ± 1% | ± 1% | ± 1% | ± 1% |
Rated Current | 50A | 40A | 29A | 23A | 14.6A | 13A | 7.3A |
Current Range | 0-50A | 0-40A | 0-29A | 0-23A | 0-14.6A | 0-13A | 0-7.3A |
Ripple&Noise(Max.) | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p |
Line Regulation | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% |
Load Regulation | ± 1% | ± 1% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% |
Rated Power | 250W | 300W | 348W | 348W | 350.4W | 351W | 350.4W |
Rated Power | 74% | 79% | 74% | 78% | 83% | 83% | 84% |
Voltage Adjust Range | 4.5-5.6V | 6-9V | 10-13.2V | 13.5-18V | 20-26.4V | 26-32V | 41-56V |
Voltage Range | 90 ~ 132VAC/180-264VAC 47 ~ 63Hz;255 ~ 370VDC
| ||||||
AC Current | 4.5A/115V 2.5A/230V
| ||||||
Inrush Current(Max.) | 25A/115V 50A/230V
| ||||||
Leakage Current | <3.5mA/240VAC
| ||||||
Overload Protection | 105-145% TYPE : OUTPUT CUTOUT AC Restart
| ||||||
Over-voltage Protection | 115%-135%
| ||||||
Over-temperature Protection | RTH3 ≥ 50 ℃ FAN ON ≤ 45 ℃ FAN OFF, ≥ 80 ℃ OUTPUT CUTOUT(5-15V) RTH3 ≥ 60 ℃ FAN ON ≤ 50 ℃ FAN OFF, ≥ 85 ℃ OUTPUT CUTOUT(24-48V)
| ||||||
Temp.Coefficient | ± 0.03%/ ℃ (0 ~ 50 ℃ ) | ||||||
Setup.Rise,Hold Time | 200ms,100ms,20ms | ||||||
Vibration | 10 ~ 500Hz,2G 10min,/11cycle,60min,each axes | ||||||
Withstand Voltage | I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC | ||||||
Isolated Resistor | I/P-O/P,I/P-FG,I/P-FG:500VDC/100M Ω | ||||||
Working Temp.Humidity | -10 ℃~ +50 ℃ ,20% ~ 90RH | ||||||
Storage Temp.Humidity | -20 ℃~ +85 ℃ ,10% ~ 95%RH | ||||||
Dimension | 215¡Á115¡Á50mm | ||||||
Weight | 0.9kg | ||||||
Safety Standards | UL1950 |
AC input range selected by switch.
Protections:short circuit/overload/over voltage/over temperature 100% full load burn-in test Low cost,high reliability 1 year warranty Size: 215*115*50mm
Weight:1.08kg
Setup,rise,hold up time: 200ms,50ms,20ms/230VAC at full load
Note :)
More order quantities, more discount!!!
Shipping
1) Normally , Your item(s) will be shipped within 24~48 hours after your payment is cleared.
2) For US and EU buyer: We have US and Germany warehouse, so we can ship goods to you from US or Germany if it is in the stock,but if it is out of stock, we will ship goods to you from China :)
3) There is online tracking number after the item shipped.
Problem and Feedback
1) Pl ease give us the opportunity to resolve any problem when you have, we will try our best to help you.
2) Your satisfaction is of the utmost importance for us, so please contact us before you want to leave a negative feedback.
Refund
1) If you are not satisfied with the package, please tell us the reason.
2) Delivery cost must be paid by the buyer.
Honor
1) Changzhou Wantai Electrical Appliance Co.,Ltd has powerful technology, mature technics and complete testing equipment.
2) We have obtained ISO9001:2000 certification, CE certification and all of our products conform to EU RoSH requirements.
Note:
we can manufacture products according to our customer's requirements.
Application
Our products are mainly used in robotization, Spinning Automatization, Printing, Packing, Medica Machine, Make-up Equipment, Household Appliance, Milling Machine, Engraver Machine, CNC Routers and so on, automatic equipment of various trades . Recently, our motors are hot selling in 3D printer field :)
FAQ:
Q: How to connect the goods after purchasing ? A: We can send the Wiring Diagram to your email if you need :)
Q: What can I do if your motor don ’ t work well ? A: All our goods are in high quality and 100% tested before selling. If it does not work well or with some problem,please check the wiring connection, and you can email to me for any question, we will try our best to help you :)
Q: How can I get some discount ? A: More order more discount :)
Q: How to be to your distributor ? A. Welcome to be our distributor, please email to me :)
we will give our distributor competitive price & perfect technical support for mutually benefits!