YD-2 Aluminum Adjustable Rear Short "H" Arm Kit (Purple/Bevel edge) Y2-P08RASA - By adopting aluminum as the material of the arm, rigidity & accuracy & weight are greatly improved compared to resin parts. By shortening the suspension arm compared to the conventional rear lower suspension arm, traction performance around the rear is improved, allowing stable drift driving at deeper angles.
YD-2/YD-4 Aluminum Front Short Lower A arm Set (Red/Bevel Edge) Y2-R08FSCA - By shortening the arm length even shorter than the resin short arm and avoiding interference with the wheel, the cut angle is further improved, allowing driving at a deeper drift angle. In addition, it is effective in improving the grounding feeling of the front by increasing the weight and improving the steering response by increasing rigidity.
YD-2 Aluminum Front Short Lower A arm Set (Purple/Bevel edge) Y2-P08FSCA - By shortening the arm length even shorter than the resin short arm and avoiding interference with the wheel, the cut angle is further improved, allowing driving at a deeper drift angle. In addition, it is effective in improving the grounding feeling of the front by increasing the weight and improving the steering response by increasing rigidity.
YD-2/YD-4 Aluminum Adjustable Rear Short "H" Arm Kit (Red/Bevel Edge) Y2-R08RASA - By adopting aluminum as the material of the arm, rigidity & accuracy & weight are greatly improved compared to resin parts. By shortening the suspension arm compared to the conventional rear lower suspension arm, traction performance around the rear is improved, allowing stable drift driving at deeper angles.
YD-2/YD-4 Aluminum Adjustable Rear Short "H" Arm Black - Y2-008RASA - By adopting aluminum as the material of the arm, rigidity & accuracy & weight are greatly improved compared to resin parts. By shortening the suspension arm compared to the conventional rear lower suspension arm, traction performance around the rear is improved, allowing stable drift driving at deeper angles.
Reve D SPM Titanium Rod End Ball SS RT-006SS - Reve D Ball Stud (SS size) of SPM (Super Precision Machine Cut) titanium series. The lightweight / high rigidity titanium has applied for high precision machine cut process to produce 4.3mm Ball Stud (SS size) which suits for very popular YD-2 series (Excluding SXiii and later) and other cars.
Reve D SPM Titanium Turnbuckles 20mm (2pcs) RT-TB20 - To enhance our popular SPM (Super Precision Machine Cut) Titanium Series with ultra-high precision machine cut threads we are introducing a Turnbuckles ! RT-T16 – SPM Titanium Turnbuckles 16mm (2pcs).
Reve D HG Front Conversion set for Bell Crank YD2 RD-008B - A 4mm type turnbuckle wrench is required to assemble the upper arm pin. Mounting of the upper arm is fixed by aluminum thin nylon nut, the spacer clearance can be adjusted easily, and the upper arm that operates smoothly without play can be easily assembled.
YD-2 Hybrid Front Shock Tower (Graphite/Red) Y2-017AGRA - A front shock tower that fits into all YD-2 series cars. The upper shock tower ensures sufficient rigidity by being lightweight and highly rigid graphite with 3 mm thick. The upper arm holder is made of aluminium to increase rigidity and accuracy.
YD-2 Hybrid Front Shock Tower (Graphite/Purple) Y2-017AGPA - A front shock tower that fits into all YD-2 series cars. The upper shock tower ensures sufficient rigidity by being lightweight and highly rigid graphite with 3 mm thick. The upper arm holder is made of aluminium to increase rigidity and accuracy.
YD-2 Hybrid Front Shock Tower (Graphite/Black) Y2-017AGBA - A front shock tower that fits into all YD-2 series cars. The upper shock tower ensures sufficient rigidity by being lightweight and highly rigid graphite with 3 mm thick. The upper arm holder is made of aluminium to increase rigidity and accuracy.
Reve D Carbon Bumper set RD-004 - Reve D bumper made of lightweight and highly rigid dry carbon material! The included hard anodized aluminium plate is reversible. The Reve D logo and the beautifully chamfered surface or the machine cut surface can be used as desired for 2 different looks!
Reve D HG Front Conversion set for YD2 RD-008 - REVE D HG FRONT CONVERSION SET FOR SLIDE RACK YD-2! Aluminium upper arm mount (1pc). Aluminium upper arm (Built-in ball bearing, 1pc each for left and right). Aluminium thin M3 nylon nut (2 pcs). By making the upper suspension pin a cantilever type, succeed the downsizing of the shock tower, and combined with the effect of the lightweight dry carbon material, it contributed greatly to the weight reduction of the front.
Reve D Aluminum Spring Retainer 4mm (Pair) RD-007-4 - They have a new spring seat that suppresses spring vibration and demonstrates suspension performance more directly with the adoption of a new designed “outer guide”! Unlike a conventional spring seat, the roll is actively triggered by raising the lower spring position.
Reve D Aluminum Spring Retainer 2mm (Pair) RD-007-2 - In particular, + 2mm, + 4mm & +6mm increase the spring position to positively induce chassis roll and improve side grip without compromising traction performance. They have a new spring seat that suppresses spring vibration and demonstrates suspension performance more directly with the adoption of a new designed “outer guide”!
Reve D Aluminum Spring Retainer 0mm (Pair) RD-007-0 - They have a new spring seat that suppresses spring vibration and demonstrates suspension performance more directly with the adoption of a new designed “outer guide”! Unlike a conventional spring seat, the roll is actively triggered by raising the lower spring position.
Reve D SPM Titanium Spur Gear Screw (4 pcs) RT-008 - Reve D SPM (Super Precision Machine Cut) titanium gear series spur gear screw. In addition to improving rotational efficiency by reducing weight, the installation accuracy of the spur gear is greatly improved by providing a cylindrical section optimized for fixing the spur gear at the root of the M3 thread, reducing unnecessary vibration!
Reve D SPM Titanium Rod End Ball Long Neck (2pk) RT-006LN - Reve D rod end ball (Short neck) of the SPM (Super Precision Machine Cut) titanium series. By using a lightweight / high rigidity titanium material and performing high-precision cutting.
Reve D SPM Titanium Rod End Ball Short Neck (2pk) RT-006SN - Reve D rod end ball (Short neck) of the SPM (Super Precision Machine Cut) titanium series. By using a lightweight / high rigidity titanium material and performing high-precision cutting.
Reve D SPM Titanium Rod End Ball L (2pk) RT-006L - Reve D rod end ball (Large) of the SPM (Super Precision Machine Cut) titanium series. By using a lightweight / high rigidity titanium material and performing high-precision cutting.
Yokomo High Traction Gear Box Spacer For YD-2SXIII - Y2-302S2 - Team HIGH TRACTION Gearbox Spacer was born from the idea of Team YOKOMO DRIFT. Spacer set that can increase rear traction by raising the gearbox height of the YD-2SXIII. The main plate is made of 2 mm thick steel and weighs about 17.8 g, and the stamp of Yokomo is an accent of one point.
YD-2 series Brass Rear Hub Carrier - Y2-415RBA - A brass rear hub carrier that can be used in common with all YD-2 series. Since the unsprung weight that directly applies to the tire increases, it is possible to effectively increase traction compared to the chassis weight.
Reve D Aluminium Suspension Mount No.7 (60.8-64.0mm) RD-300-7 - The Reve D aluminium suspensions mounts have many fine tuning options available to them just be simply changing the bush. Finished off with a cool chamfered edge, these are stylish too! RD-300-1: Aluminium Suspension mount #1 (39.2-42.4mm).
Reve D Aluminium. Suspension Mount No.6 (57.2-60.4mm) RD-300-6 - Reve D Aluminium. Suspension Mount No.6 (57.2-60.4mm) RD-300-6. The Reve D aluminium suspensions mounts have many fine tuning options available to them just be simply changing the bush. Finished off with a cool chamfered edge, these are stylish too!
Reve D Aluminium Suspension Mount No.5 (53.6-56.8mm) RD-300-5 - The Reve D aluminium suspensions mounts have many fine tuning options available to them just be simply changing the bush. Finished off with a cool chamfered edge, these are stylish too! RD-300-1: Aluminium Suspension mount #1 (39.2-42.4mm).
Reve D Aluminium Suspension Mount No.4 (50.0-53.2mm) RD-300-4 - The Reve D aluminium suspensions mounts have many fine tuning options available to them just be simply changing the bush. Finished off with a cool chamfered edge, these are stylish too! RD-300-1: Aluminium Suspension mount #1 (39.2-42.4mm).
YD-2 Ceramic Bearing Set for YD-2 series Gearbox (8pcs) Y2-BBCMA - Ceramic ball bearing set for the YD-2 series of drift cars includes 6 pcs of 1050 and 2 pcs of 1150 gearbox bearings. They will greatly reduce natural friction for improved throttle response and top speed.
Yokomo YD-2Z Light Weight Slide Rack Set by Teams - Y2-202SZA - A slide rack set that fits the YD-2Z chassis. Teams products with rails that have been reshaped and milled, and are effective in improving steering response and kinetic performance by reducing weight.
Reve D Alu. Crab Spacer Set 1.0mm (1hole X 4) RC-KS110 - Reve D Alu. Crab Spacer Set 1.0mm (1hole X 4) RC-KS110. REVE D ALU. CRAB SPACER SET 1.0MM (1HOLE X 4) RC-KS110. Introducing a very unique product, the Reve D Crab spacer series, constructed from aluminum and ideal for adjusting the height of gearboxes and suspension mounts!
Reve D Alu. Crab Spacer Set 0.5mm (1hole X 4) RC-KS105 - Reve D Alu. Crab Spacer Set 0.5mm (1hole X 4) RC-KS105. REVE D ALU. CRAB SPACER SET 0.5MM (1HOLE X 4) RC-KS105. Introducing a very unique product, the Reve D Crab spacer series, constructed from aluminum and ideal for adjusting the height of gearboxes and suspension mounts!
Reve D MC-1 Crab Spacer Set 1.0mm (2hole X 2, 1hole X 4) M1-302S10 - Introducing a very unique product, Crab spacer for Reve D MC-1 RC drift car! Also available in a highly versatile 1-hole version that can be used in lots of different areas. Reve D have prepared a set of 4 pieces in each thickness.
YD-2 LF Big Bore Shock Taper Piston 1.2mm×6 hole (2pcs) Y2-S126T - YD-2 series SLF big bore shock taper piston. One side of the piston surface has a tapered shape, and the damping feeling differs depending on the mounting direction. It is possible to soften the feeling on the extension side of the shock by lowering the taper surface, and soften the feeling on the contraction side of the shock by raising the taper surface.
YD-2 Aluminum 21mm Rod End Adaptor for Front Lower A Arm - D-156-21AA - It is lighter than the steel adapter used for the lower arm and is effective in improving athletic performance. An aluminum rod end adapter that can be used with chassis such as the YD-2 series or the YD-4 equipped with A-arm conversion.
Reve D Aluminum Spring Retainer 6mm (Pair) RD-007-6 - They have a new spring seat that suppresses spring vibration and demonstrates suspension performance more directly with the adoption of a new designed “outer guide”! Unlike a conventional spring seat, the roll is actively triggered by raising the lower spring position.
YD-2 LF Big Bore Shock Taper Piston 1.1mm×6 hole (2pcs) Y2-S116T - YD-2 series SLF big bore shock taper piston. One side of the piston surface has a tapered shape, and the damping feeling differs depending on the mounting direction. It is possible to soften the feeling on the extension side of the shock by lowering the taper surface, and soften the feeling on the contraction side of the shock by raising the taper surface.
AXON Revoshock II for Yokomo YD-2/YD-4 (Limited Red Edition, 4pcs) DD-YS-002R - REVOSHOCK II has developed and adopted a new diaphragm to obtain the best damper damping. Therefore, the damper damping works widely and flexibly against changes in the behaviour of the machine, preventing sudden grip loss of the tire and maintaining traction.
Axon Revoshock II Damper Kit For Yokomo YD-2 YD-4 - DD-YS-002 - REVOSHOCK II has developed and adopted a new diaphragm to obtain the best damper damping. Therefore, the damper damping works widely and flexibly against changes in the behaviour of the machine, preventing sudden grip loss of the tire and maintaining traction.
YD-2 Solid Axle Set - Y2-502A - Optional parts for YD-2/YD-2 PLUS. It is a solid axle set. The rear flow is slightly more aggressive, which increases traction in the direction of travel.
Yokomo Optional parts set for YD-2 series Upgrade 4 - Y2-OP4 - By increasing the rigidity of the shock tower, the suspension will move even better. Considering the lightweight finish on the front side, we chose a graphite hybrid shock tower and a lightweight integrated bulkhead.
Yokomo Optional parts set for YD-2 series Upgrade 3 - Y2-OP3 - A short arm set that finishes the rear suspension with high precision. combined with the aluminum suspension mount, the grip of the rear tires is increased and stable running is possible. the width of the car can also be finely adjusted, and the appearance is also cool.
Yokomo Optional parts set for YD-2 series Upgrade 1 - Y2-OP1 - In addition to the height-adjustable aluminum oil shock that is the basis of suspension tuning, the aluminum suspension arm set that finishes the front area with light weight and high accuracy makes it possible to finish with a high sense of stability.
Yokomo YD-2S Rear Toe Control System - Y2-RTCA - Aluminum lower caster blocks, aluminum hub carriers, and graphite arm plates are used for light weight and high rigidity. The damper is also mounted on the front side of the suspension arm, which reduces the weight of the rear overhang and gives it a racing look.
YD-2 “Teams” Light Weight FLEX Chassis Set - Y2-002TS - While the design is slim and stylish, the weight and rigidity has been carefully balanced with bold cut-outs and milling on the bottom chassis plate. The flex balance not only improves rear traction, but also the load on the front tyre, ensuring better response of the steering.
Demi Works Polycarbonate Universal Oil Cooler set - DWUOC - Give your bodyshells originality with New Universal Oil Cooler set made of polycarbonate. – Clear polycarbonate requires cut and painting. Set Contains two Oil Coolers ! They are made exact in scale 1/10 for the real image of your bodyshells.
Reve D R-tune PC Rear spring Medium RD-016RM - Now introducing the new PC rear spring which uses the amazing “SWO ” material that has been proven in the R-tune series! We will continue to use the 2-way structure that is popular in the PC rear spring series.
Reve D Shock O-Ring Type RS for Silicon Oil RD-015RS - Introducing the new shock O-ring from Reve D, ideal for Yokomo big bore shocks. The O-ring that maximizes damper performance! Designed to work great with RT-012 SPM Titanium Shock Shaft perfectly!
YD-2Z Front Upgrade Set (Purple/Limited Item) Y2-FUSP - A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for light weight.
YD-2Z Front Upgrade Set (Red/Limited Item) Y2-FUSR - A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for light weight.
YD-2Z Front Upgrade Set (Black/Limited Item) Y2-FUSB - A new parts set to easily upgrade your YD-2Z chassis! This upgrade set balances front end weight reduction with increased precision and sharp looks at a very competitive price. The front shock towers have aluminum upper arm holders for high precision, and graphite shock mountings for light weight.
Rhino Racing DDSS-V2 (Red) YD2 Bulkhead/Steering Upgrade Kit - RR-750R - DDSS – SHARK Bulkhead / Steering Upgrade Kit. 1 x DDSS Direct Steering System. Direct Drive Servo Steering (V2) YD2 RR-750R. It will upgrade your steering and front bulkhead. Your car will have a direct servo horn styled steering rack.
Rhino Racing Shark Lower Carbon Plate (Red) For YD2 - RR-800R - RED – SHARK Lower Adjustable Chassis Kit RR-800R. This deck was designed to be used with the SHARK (Transmission/Upper deck) setup. 1 x Center Brace Aluminum. This adjustable wheelbase lower chassis kit will transform your YD2/SD/RD!
Rhino Racing Shark Gearbox (Purple) For YD2 - RR-820P - Direct fits ALL YD2 Variations. YD2 and MC-1 MUST be SLIDE RACK version. Purple – SHARK Transmission Gear Box (With Upper Deck And Shock Tower) RR-820P. 1 x SHARK Upper Adjustable Deck. 1 x SHARK Transmission Gear Box Set (left and right).
Rhino Racing Shark Gearbox (Red) For YD2 - RR-820R - Direct fits ALL YD2 Variations. YD2 and MC-1 MUST be SLIDE RACK version. RED – SHARK Transmission Gear Box (With Upper Deck And Shock Tower) RR-820R. 1 x SHARK Upper Adjustable Deck. 1 x SHARK Transmission Gear Box Set (left and right).
Rhino Racing Shark Gearbox (Black) For YD2 - RR-820B - Direct fits ALL YD2 Variations. YD2 and MC-1 MUST be SLIDE RACK version. Black – SHARK Transmission Gear Box (With Upper Deck And Shock Tower) RR-820B. 1 x SHARK Upper Adjustable Deck. 1 x SHARK Transmission Gear Box Set (left and right).
Yokomo RX Conversion Kit (Black) for YD-2 series - Y2-RXCA - Like the RX chassis kit, we have a line-up of black, purple, and red anodized colours, so you can also enjoy colour anodized from base kits such as the YD-2S. included, so you can easily try out the latest RX specifications.
Yokomo BD8 Plastic Suspension Mount Bush - B8-301BSA - It is a resin suspension mount bush for BD8 standard parts. Since 5 types of bushes with different suspension pin positions are included, a wide variety of settings are possible by combining the selection of bushes, the mounting direction, and the selection of aluminum suspension mounts.
Reve D RSD Ceramic Ball Bearing (10×5×4.0m, 2pcs) RBB-105C - RSD ceramic ball bearings for high precision, light weight and low friction at Front Knuckle! Try the RSD ceramic ball bearing that demonstrates the ultimate rotation performance! The white ceramic ball, which has the largest possible ball size, provide excellent wear resistance and high durability.
Rhino Racing C-LSD YD2 ALUMINUM Differential Assembly Unit - RR-600 - YD2 ALUMINUM C-LSD (Centrifugal) CLSD Differential Assembly Unit – RR-600. For SHARK / YD2 Transmission RR-600. 2 x Side Housing Halves (Aluminum). 1 x Main Gear (Aluminum). 2 x Bearings. 2 x O-Rings.
Yokomo YD-4/YD-2 Universal Bone (49mm) Y4-010490 - Universal bone for YD-2 and YD-4. With a length of 49 mm, it can be used for the standard rear of the YD-2 or when widening the tread by changing the suspension mount of the YD-4.
Yokomo Competition Drift Springs Progressive Φ1.5×26.5mm (2pcs) D-183F - A new special spring for drifting that combines machine response and driving stability is now available! Uncoated springs that maximize the characteristics of the steel material. The progressive type, which changes the winding pitch from the middle of the spring, maintains the ride height in the rough part of the spring and brings out the softness of traction in the multiple-wound part, and creates a smooth sliding effect when used in the rear, and a mild steering response when used in the front.
Yokomo Competition Drift Springs Progressive Φ1.4×26.5mm (2pcs) D-182F - A new special spring for drifting that combines machine response and driving stability is now available! Uncoated springs that maximize the characteristics of the steel material. The progressive type, which changes the winding pitch from the middle of the spring, maintains the ride height in the rough part of the spring and brings out the softness of traction in the multiple-wound part, and creates a smooth sliding effect when used in the rear, and a mild steering response when used in the front.
Reve D Alu. Sus. Mount Type TK No.7 (60.8-64mm) RD-300-7T - Reve D Alu. Mount Type TK No.7 (60.8-64mm) RD-300-7T. “Type TK”, which was developed by Takahiro Kawakami and the Reve D team, has two rod end ball mounting holes on the upper surface of the suspension mount.
Reve D Alu. Sus. Mount Type TK No.6 (57.2-60.4mm) RD-300-6T - Reve D Alu. Mount Type TK No.6 (57.2-60.4mm) RD-300-6T. “Type TK”, which was developed by Takahiro Kawakami and the Reve D team, has two rod end ball mounting holes on the upper surface of the suspension mount.
Yokomo Serrate Aluminum Flanged Nut (Black·4pcs) ZC-N4FBK - This is a type of aluminum nut that prevents loosening by serration of the flange surface. Compared to nylon lock nuts, it is possible to fix them tightly. There are four colours: black, blue, red, and purple.
Yokomo YD-2 Aluminum Front Upper A Arm - Y2-008FUC - An optional part for the YD-2 series, the aluminum front upper “A” arm. The upper arm has increased mounting accuracy and rigidity, which is effective in improving steering response and improving the accuracy of actuation around the suspension.
Yokomo YD-2 Aluminum Front Axle - Y2-010FAA - Aluminum front axle for YD-2 series. By reducing the weight of the axle shaft, there are effects such as improving the steering response and suppressing the feeling of the front tire being caught.
Yokomo YD-2/YD-4 Aluminum Front Short Lower A arm Set - Y2-008FSCA - These are the new short front A-arms for the YD-2 and YD-4 series of drift cars. In addition the mounting position of the shock absorbers is adjustable using shims for near endless set-up possibilities.
Yeah Racing Aluminum Big Bore Go 60mm Damper Set 4pcs Black - BBG-0060BK - Big Bore Go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don’t have to go looking for different springs after purchasing our set of shocks!
Reve D Aluminum Suspension Mount (RF type) No.3 RD-300RF3 - Aluminum suspension mount (RF type) for M1-RAC (rear A arm conversion set for MC-1). Uses lightweight / high-rigidity aluminum material. RD-300RF2 Aluminum suspension mount RF type No.2. RD-300RF3 Aluminum suspension mount RF type No.3.
YD-2 SLF Big Bore Shock Piston 1.4mm×4 holes (4pcs) Y2-S144 - A variation of the piston for YD-2 big bore shocks is now available. This allows the suspension to move more easily for better traction when cornering. In the drifting category, where fairly low viscosity oil is often used, widening the piston hole makes it easier to operate even with slightly harder oil (#200 to #300) and delays the penetration of silicone oil into the O-rings, etc., enabling the oil to remain in good condition for longer.
Demi Works Lexan Scale Intercooler Type 2 - DWLIC2 - Demi Works – Polycarbonate Scale Intercooler set. Give your bodyshells originality with New Universal Scale Intercooler set made of polycarbonate. They are made exact in scale 1/10 for the real image of your bodyshells.
Demi Works Lexan Scale Intercooler Type 1 - DWLIC1 - Demi Works – Polycarbonate Scale Intercooler set. Give your bodyshells originality with New Universal Scale Intercooler set made of polycarbonate. They are made exact in scale 1/10 for the real image of your bodyshells.
Demi Works Intercooler w/Spray System Gold - DWISC-G - Demi Works – Intercooler with Spray System. Intercooler w/Spray System – Realistic size (scale 1/10) to embellish your bodyshell and give it character. – Available colours: Black, Silver, Gold.
Demi Works Intercooler w/Spray System Black - DWISC-B - Demi Works – Intercooler with Spray System. Intercooler w/Spray System – Realistic size (scale 1/10) to embellish your bodyshell and give it character. – Available colours: Black, Silver, Gold.
Demi Works Intercooler w/Spray System Silver - DWISC-S - Demi Works – Intercooler with Spray System. Intercooler w/Spray System – Realistic size (scale 1/10) to embellish your bodyshell and give it character. – Available colours: Black, Silver, Gold.
Demi Works Scale Intercooler Gold - DWNIC - Demi Works – Scale Intercooler. Scale Intercooler – Realistic size (scale 1/10) to embellish your bodyshell and give it character. – Available colours: Black, Silver, Gold.
Demi Works Scale Intercooler Black - DWNIC - Demi Works – Scale Intercooler. Scale Intercooler – Realistic size (scale 1/10) to embellish your bodyshell and give it character. – Available colours: Black, Silver, Gold.
Demi Works Scale Intercooler Silver - DWNIC - Demi Works – Scale Intercooler. Scale Intercooler – Realistic size (scale 1/10) to embellish your bodyshell and give it character. – Available colours: Black, Silver, Gold.
Rhino Racing Shark Lower Arm Set (Red) RR-1100R - SHARK Lower Aluminum A-Arms. For SHARK DDSS YD2 RMX RDX. These lower arms utilizes bearings on the pins for a more free moving and precision setup. These sleek precision arms utilizes tradition shimming as well as the new revolutionary spring loaded shimming.
Rhino Racing Shark Lower Arm Set (Black) RR-1100B - BLACK SHARK Lower Aluminum A-Arms. For SHARK DDSS YD2 RMX RDX. 2 x Hardened Suspension Arm Links (Etched). The specially designed links are hardened tool grade steel that outlasts tradition steel/titanium components.
Rhino Racing Hydra Shark IFS Kit (Purple) RR-1000P - The Hydra Inboard Front Suspension transform your DDSS to it’s final form. You can easily adjust your chassis height without adjusting your preload. IFS mounted shocks also allows for better body clearance.
Rhino Racing Hydra Shark IFS Kit (Red) RR-1000R - The Hydra Inboard Front Suspension transform your DDSS to it’s final form. You can easily adjust your chassis height without adjusting your preload. IFS mounted shocks also allows for better body clearance.
Rhino Racing Hydra Shark IFS Kit (Black) RR-1000B - The Hydra Inboard Front Suspension transform your DDSS to it’s final form. You can easily adjust your chassis height without adjusting your preload. IFS mounted shocks also allows for better body clearance.
Yokomo SD1.0LTS Aluminum Vari Kingpin Angle Steering Block Set - Y2-415SALL - This is an aluminum steering block set used in SD1.0LTS that can produce realistic driving that emphasizes roll. Since the rear rolls in the center, there is little feeling of stall due to the front rampage, and it produces the roll of a heavy and real car-like machine.
Yokomo Drift LTS Rear Spring ⌀1.0×48mm×10.0turns (2pcs) D-188 - It is a multi-wound spring for pulling out the roll and performing realistic drift driving. Supple characteristics to set the spring length longer and use the rebound stroke effectively. It goes well with the soft damper oil, and the machine with a high center of gravity produces a roll feeling like a real car.
Yokomo Drift LTS Front Spring ⌀0.9×45mm×8.5turns (2pcs) D-186 - It is a multi-wound spring for pulling out the roll and performing realistic drift driving. Supple characteristics to set the spring length longer and use the rebound stroke effectively. It goes well with the soft damper oil, and the machine with a high center of gravity produces a roll feeling like a real car.
Yokomo BD11 Titanium Lower Shock Mount (2pcs) B11-S9T - It is a mount used to attach to the suspension arm on the lower side of the shock. It ensures a secure mounting of the shock and is made of titanium for a lightweight finish.
AXON Black Silicon Ring P3/Medium Soft (8pcs) OR-SO-003 - The black silicone ring was developed exclusively for oil dampers. The material is Axon’s original black silicone rubber to maximize the stability of the suspension.
AXON Black Silicon Ring P3/Medium (8pcs) OR-SO-002 - The black silicone ring was developed exclusively for oil dampers. The material is Axon’s original black silicone rubber to maximize the stability of the suspension.
AXON Black Silicon Ring P3/Soft (8pcs) OR-SO-001 - The black silicone ring was developed exclusively for oil dampers. The material is Axon’s original black silicone rubber to maximize the stability of the suspension.
Yokomo SD2.0 Aluminum Rear Bulkhead (L) Y2-302ALB - This is the left side of the aluminum rear bulkhead for SD2.0. By changing the position of the counter gear and motor mounting, it is possible to use a 3-gear specification that has steering characteristics and a 4-gear specification that emphasizes rear traction.
Yokomo SD2.0 Aluminum Rear Bulkhead (R) Y2-302ARB - This is the right side of the aluminum rear bulkhead for SD2.0. By changing the position of the counter gear and motor mounting, it is possible to use a 3-gear specification that has steering characteristics and a 4-gear specification that emphasizes rear traction.
Rhino Racing Shark Rear H Arm Adapter Set (Purple) RR-1600P - SHARK Rear H Adapter. For SHARK DDSS YD2 RMX RDX. This H Arm set transforms the lower arm into STATIC setup. You will be able to make the lower arm a traditional style lower arm. 2 x H Arm Adapters.
Rhino Racing Shark Rear H Arm Adapter Set (Red) RR-1600R - SHARK Rear H Adapter. For SHARK DDSS YD2 RMX RDX. This H Arm set transforms the lower arm into STATIC setup. You will be able to make the lower arm a traditional style lower arm. 2 x H Arm Adapters.
Rhino Racing Shark Rear H Arm Adapter Set (Black) RR-1600B - SHARK Rear H Adapter. For SHARK DDSS YD2 RMX RDX. This H Arm set transforms the lower arm into STATIC setup. You will be able to make the lower arm a traditional style lower arm. 2 x H Arm Adapters.
Rhino Racing Shark Rear Upright Set (Purple) RR-1500P - SHARK Rear Upright Set. For SHARK DDSS YD2 RMX RDX. 2 x Upright Mounting Plates. These uprights have a lot of mounting options. There are pickup points for active toe and static formats. 2 x Rear Uprights.
Rhino Racing Shark Rear Upright Set (Red) RR-1500R - SHARK Rear Upright Set. For SHARK DDSS YD2 RMX RDX. 2 x Upright Mounting Plates. These uprights have a lot of mounting options. There are pickup points for active toe and static formats. 2 x Rear Uprights.
Rhino Racing Shark Rear Upright Set (Black) RR-1500B - SHARK Rear Upright Set. For SHARK DDSS YD2 RMX RDX. 2 x Upright Mounting Plates. These uprights have a lot of mounting options. There are pickup points for active toe and static formats. 2 x Rear Uprights.
Rhino Racing Shark Steering Knuckle Set (Purple) RR-1400P - SHARK Front Steering Knuckle Set. For SHARK DDSS YD2 RMX RDX. 2 x Front Steering Knuckles. The arm features a special detachable mount that you can shim for even more adjustability. These knuckles have superb clearance.
Rhino Racing Shark Steering Knuckle Set (Red) RR-1400R - SHARK Front Steering Knuckle Set. For SHARK DDSS YD2 RMX RDX. 2 x Front Steering Knuckles. The arm features a special detachable mount that you can shim for even more adjustability. These knuckles have superb clearance.
Rhino Racing Shark Steering Knuckle Set (Black) RR-1400B - SHARK Front Steering Knuckle Set. For SHARK DDSS YD2 RMX RDX. 2 x Front Steering Knuckles. The arm features a special detachable mount that you can shim for even more adjustability. These knuckles have superb clearance.
Rhino Racing Shark Suspension Block Set (Purple) RR-1300P - SHARK Suspension Mount Set. For SHARK DDSS YD2 RMX RDX. The suspension block set gives your rear suspension the pickup points needed for an active and non active toe setup on the rear uprights. 2 x Front Suspension Mounts.
Rhino Racing Shark Suspension Block Set (Red) RR-1300R - SHARK Suspension Mount Set. For SHARK DDSS YD2 RMX RDX. The suspension block set gives your rear suspension the pickup points needed for an active and non active toe setup on the rear uprights. 2 x Front Suspension Mounts.
Rhino Racing Shark Suspension Block Set (Black) RR-1300B - SHARK Suspension Mount Set. For SHARK DDSS YD2 RMX RDX. The suspension block set gives your rear suspension the pickup points needed for an active and non active toe setup on the rear uprights. 2 x Front Suspension Mounts.
Rhino Racing Shark Upper Arm Set (Purple) RR-1200P - SHARK Upper Arms. For SHARK DDSS YD2 RMX RDX. 2 x Hardened Suspension Arm Links (Etched). The link is made with hardened tooling steel alloy that is very strong. These upper arms utilizes bearings on the pins for a more free moving and precision setup.
Rhino Racing Shark Upper Arm Set (Red) RR-1200R - SHARK Upper Arms. For SHARK DDSS YD2 RMX RDX. 2 x Hardened Suspension Arm Links (Etched). The link is made with hardened tooling steel alloy that is very strong. These upper arms utilizes bearings on the pins for a more free moving and precision setup.
Rhino Racing Shark Upper Arm Set (Black) RR-1200B - SHARK Upper Arms. For SHARK DDSS YD2 RMX RDX. 2 x Hardened Suspension Arm Links (Etched). The link is made with hardened tooling steel alloy that is very strong. These upper arms utilizes bearings on the pins for a more free moving and precision setup.
Rhino Racing Shark Lower Arm Set (Purple) RR-1100P - SHARK Lower Aluminum A-Arms. For SHARK DDSS YD2 RMX RDX. 2 x Hardened Suspension Arm Links (Etched). The specially designed links are hardened tool grade steel that outlasts tradition steel/titanium components.
24Krc Intercooler For Drift Spec Wide Kit Gr86 - 24K5012 - Drift Spec GR86 Intercooler can only be assembled with the wide kit (Drift Spec GR86) . Drift spec gr86 intercooler, made with high quality material and flexible. Intercooler: 1pc. SET INCLUDES. The pictures are for reference only.
24Krc Intercooler For Toyota Gr86 - 24K5008 - GR86 intercooler, made with high quality material and flexible. Intercooler: 1pc. The pictures are for reference only. THIS IS SUPPLIED UNPAINTED. Reproduction, modification of any contents (Text, Images etc.) without permission is strictly prohibited.
Rhino Racing DDSS-V2 (Purple) YD2 Bulkhead/Steering Upgrade Kit - RR-750P - PURPLE DDSS – SHARK Bulkhead / Steering Upgrade Kit. 1 x DDSS Direct Steering System. Direct Drive Servo Steering (V2) YD2 RR-750P. It will upgrade your steering and front bulkhead. Your car will have a direct servo horn styled steering rack.
Rhino Racing DDSS-V2 (Black) YD2 Bulkhead/Steering Upgrade Kit - RR-750B - BLACK DDSS – SHARK Bulkhead / Steering Upgrade Kit. 1 x DDSS Direct Steering System. Direct Drive Servo Steering (V2) YD2 RR-750B. It will upgrade your steering and front bulkhead. Your car will have a direct servo horn styled steering rack.
YD-2E/S/Z series Lightweight Slide Rack /Bulkhead Set V2 (Black) Y2-202SLB - Slide rack set for the YD-2 series. Lightweight type with integrated bulkhead and milled slide rack rails is used to reduce the weight of the front section and improve steering response. When mounted on a resin chassis, the rigidity of the front section is also increased, which reduces front tire catching behaviour at the entrance of corners, etc., and improves steering stability.
Yokomo Aluminum Main Chassis for SD1.0/Z/ZS - Y2-002AL - This is an aluminum main chassis used as the standard chassis in SD1.0. With a thickness of 2.0 mm, it has high rigidity and enables a stable ride. The black anodized chassis top is also bevelled for a sharper look.
Air Filter Sponge (30DNB 2.0) - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. made with love by. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Air filter wear (30DNB 2.0) - Colour: Black. Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. Position: Rear. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
R.E.M.40049 Silicone Oil Thin 20 ML - JTL eBay template - Adpet-mini meside reviews Other auctions REM40049 silicone oil thin 20 ml REM40049 silicone oil thin 20 ml item details More information Item number: 3126 EAN: 4250039811115 Manufacturer: 70176 REM You might also be interested in About Us At HISTORY MODELS by Spielundhobbybrauns, we specialize in historical ready-made models of all kinds. Shipment Combined shipping possible! Pay postage only once for all items purchased on the same day. If you would like to take advantage of the combined shipping, please wait for the combined invoice after the purchase before paying. pay We accept PayPal or bank transfer.
30DN Pullstarter Inner Coil Spring - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
(90 €/ KG) 500g Äronix Grafithaltige Kontaktpaste C-Hexa -20 + 170° Electrics, - You buy without risk from the dealer and receive an invoice with VAT shown. If, despite our careful examination, something is wrong with the goods, we ask you to contact us. There is always a solution. We offer the following immediately available professional accessories: 500 grams of ÄRONIX 4402 “C-HEXA” contact paste containing graphite, improves the electrical conductivity of metals Optimal conductive properties when processing contact points with different non-ferrous metal pairings (e.g. aluminum and copper), galvanized or nickel-plated contact points as well as connectors and terminals. Safety: free from lead compounds, sulfate, chlorides and fluorides They do not exempt the processor from carrying out his own checks. or suitability for a specific purpose cannot be determined from.
Aluminum L&R Air Cleaner Intake Tamiya RC 1/14 King Grand Hauler Semi Tractor - Pair Aluminum Air Cleaner Intake for Tamiya RC 1/14 King Hauler Semi Tractor Truck Description: Realistic design and exceptional quality Made out of aluminum Fit Tamiya 1/14 King Hauler or other Semi tractor 5.6 cm Height and 2.5cm Diameter Sold as a pair Notes: Require fitted and glue in place for the screen Trailer show in the picture is for reference only not included This is for Toy Radio Control Scale Semi Truck only Please contact us if you have any question Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Aluminum L&R Air Cleaner Intake Tamiya R/C 1/14 King Grand Hauler Semi Tractor - Pair Aluminum Air Cleaner Intake for Tamiya RC 1/14 King Hauler Semi Tractor Truck Description: Realistic design and exceptional quality Made out of aluminum Fit Tamiya 1/14 King Hauler or other Semi tractor 5.6 cm Height and 2.5cm Diameter Sold as a pair Notes: Require fitted and glue in place for the screen Trailer show in the picture is for reference only not included This is for Toy Radio Control Scale Semi Truck only Please contact us if you have any question.
Aluminum Pair Air Cleaner Intake w/ Hose Tamiya RC 1/14 King Grand Hauler Semi - Pair Aluminum Air Cleaner Intake with side hose for Tamiya RC 1/14 Scale Toy King Hauler Grand Hauler Semi Tractor Truck Description: Realistic design and exceptional quality Made out of aluminum Fit Tamiya 1/14 King Hauler or other Semi tractor 5.2 cm Height and 2.5cm Diameter Come with the side rubber hose Sold as a pair Notes: Trailer show in the picture is for reference only not included This is for Toy Radio Control Scale Semi Truck only Please contact us if you have any question.
Aluminum L&R Air Cleaner Intake Tank Hose Tamiya RC 1/14 King Grand Hauler Semi - Pair Aluminum Air Cleaner Intake with side hose for Tamiya RC 1/14 Scale Toy King Hauler Grand Hauler Semi Tractor Truck Description: Realistic design and exceptional quality Made out of aluminum Fit Tamiya 1/14 King Hauler or other Semi tractor 5.2 cm Height and 2.5cm Diameter Come with the side rubber hose Sold as a pair Notes: Trailer show in the picture is for reference only not included This is for Toy Radio Control Scale Semi Truck only Please contact us if you have any question.
Aluminum L&R Pair Air Cleaner Intake Hose Tamiya RC 1/14 King Grand Hauler Semi - Pair Aluminum Air Cleaner Intake with side hose for Tamiya RC 1/14 Scale Toy King Hauler Grand Hauler Semi Tractor Truck Description: Realistic design and exceptional quality Made out of aluminum Fit Tamiya 1/14 King Hauler or other Semi tractor 5.2 cm Height and 2.5cm Diameter Come with the side rubber hose Sold as a pair Notes: Trailer show in the picture is for reference only not included This is for Toy Radio Control Scale Semi Truck only Please contact us if you have any question.
RC Silicone Diff Oil Team Associated 59ml Bottles (2000Cst - 1 Million Cst) New - Team Associated Silicone Diff Oil. Add 2 or more bottles to your basket to qualify. Factory Team Silicone Fluids are made of the highest quality materials and are laboratory-tested, resulting in a high-performance blend of premium silicone that provides more consistent differential action as well as longevity.
Oil Free Revs 2 Pro for Bearings Lubrication Electric Motor team orion ORI41704 - Modeling items are not toys and therefore not suitable for children under the age of 14! offers you high-quality products from the team orion brand. Whether it's selecting batteries, inventing V2 motor technology, introducing LiPo batteries in the RC car sector or inventing CRF motor technology: we always want to be faster, more attractive and cheaper than the competition. Global success proves team orion right. team orion is a multinational company and its products are synonymous with racing performance, the highest quality standards and Swiss technology. team orion is off-road and on-road world champion in numerous categories! Rotor start backplate electric starter engine rebuild plate Left Force Motor Multi charging cable 14 in 1 gold contact Futaba JR Tamiya T connector Deans Mini T.
Saver Set Cleaning Care Oil Rc-Motor Clean Protection FORCE Engine By partCore - With its special active formula based on PTFE, it cleans and preserves at the same time. PTFE beads adhere to almost any material, especially metal, and smooth the surface in the micro range. A protective layer forms that reduces friction, preserves it and thus reduces wear. The liquid active ingredients and the high PTFE content ensure cleaning, lubrication, preservation, water displacement and corrosion protection in one product. Reliably removes combustion residues. Components designed more for cleaning. The PTFE beads certainly also form a protective protective layer. If the engine is not running for a longer period of time, we recommend the viscous RC - Motor Protection, which contains more TEFLON components.FORCE Engine RC - Motor Protection - Made in Germany It is a high-tech pres.
Saver Set Cleaning Care High Power Oil Teflon FORCE Engine By partCore - Components designed more for cleaning. The PTFE beads certainly also form a protective protective layer. If the engine is not running for a longer period of time, we recommend the viscous RC - Motor Protection, which contains more TEFLON components.FORCE Engine RC - Motor Protection - Made in Germany It is a high-tech preservation oil with a high TEFLON content. The finest TEFLON beads form a protective layer and thus long-term preservation. A few drops into the carburettor and/or glow plug opening, or All other engine openings accessible from the outside are sufficient and with a few turns the agent is distributed to Allen relevant places. Moving parts and the engine interior are protected and preserved. Oxidation protection, lubrication and preservation for months.FORCE Engine high per.
2 Packets - Fastrax After Run Engine Oil FAST64 - After run oil preserves the inner parts of your engine from oxidation. We advise to use afterrun after every racing session. After Run Engine Oil FAST64. FASTRAX AFTER RUN ENGINE OIL.
80mm Spark Plug Wrench Spanner Socket Handle Tubular Plumber Motorcycle Too URUK - Double end hex spark plug socket: one end is 16mm, and the other end is 18mm. 1Pc Double End Spark Plug Socket. Special tools for manual disassembly of the spark plug. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
DDM 20ml Bottle of Air Filter Oil - 20 ml bottle (20cc; approx 2/3 ounce) of air filter oil. Works on both foam and cotton filters. Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
(54 €/ 100g) 20g Äronix Grafithaltige Kontaktpaste C-Hexa -20 + 170° Electrics, - You buy without risk from the dealer and receive an invoice with VAT. If, despite our careful examination, something is wrong with the goods, we ask that you contact us. There is always a solution. We offer the following immediately available professional accessories: 20 grams ÄRONIX 4402 "C-HEXA" graphite contact paste improves the electrical conductivity of metals Optimum conductive properties when processing contact points with different non-ferrous metal pairs (e.g. aluminum and copper), galvanized or nickel-plated contact points as well as connectors and clamps. ● Specially designed for electrical systems under humid conditions Safety: free from lead compounds, sulphate, chlorides and fluorides or suitability for a specific application cannot be based on our information be derived.
Engine Oil Rc-Motor Clean And Protection Ptfe 50 ML FORCE Engine By partCore - The FORCE Engine offers you RC engine clean & protection. It is a resin-free and acid-free engine care oil for 2-stroke and 4-stroke engines in model building. With its special active formula based on PTFE, it cleans and preserves at the same time. PTFE beads adhere to almost any material, especially metal, and smooth the surface in the micro range. A protective layer forms that reduces friction, preserves it and thus reduces wear. The liquid active ingredients and the high PTFE content ensure cleaning, lubrication, preservation, water displacement and corrosion protection in one product. Reliably removes combustion residues. Components designed more for cleaning. The PTFE beads certainly also form a protective protective layer. If the engine is not running for a longer period of time, we.
Team Associated Silicone Diff Oil 200,000 CST 59ml 200K - 200K Centre. This is a popular basic set up, I tend to like to run a thicker diff in the front, to smooth out the aggressive steering, and a thinner in the middle, to smooth out the acceleration and punch, so 7000-5000-3000.
Air Filter Oil RC Engine Air Support 50 ML Nitro Motor FORCE Engine By partCore - the FORCE Engine RC-Motor Air offers you support for your air filters - Made in Germany. It is a highly effective air filter oil especially for model engines. The viscosity is thin and thus ensures easy penetration of the foam or filter material. The solvent evaporates very quickly and forms a dense, dirt-absorbing oil film. The blue color tells you immediately whether the entire air filter is oiled. We recommend application at least 2 hours before starting the engine. You can easily store finished air filters in a plastic bag. Modeling items are not toys and therefore not suitable for children under the age of 14! Rotor start backplate electric starter engine rebuild plate Left Force Motor Nitro Engine Glow Plug Assortment Hot Medium Cold FORCE Engine B4 B5 B6 252012 Multi charging cab.
High-Performance RC High Performance 25 ML Dosiernadel FORCE Engine By - GEAR-FLON stands for a high-performance grease and oil based on TEFLON | PTFE base. Ideal for applications in model making. Finest PTFE particles | Beads stick to any surface, such as metal, plastic or wood and close even the smallest pores there in the micro range. A smooth protective and lubricating film is created that creates far less contact for friction and does not bind dirt. A good example is like rubbing ice on ice. Friction is reduced by up to 80% and thus prevents wear. Furthermore, a long-term preservation is formed against all external influences such as moisture [salt] water, hand perspiration and thus prevents rusting and corrosion. The PTFE | TEFLON layer remains even if no more grease or oil is visible and forms a dry lubrication with emergency running properties. Gears, b.
Oils for Conservation RC Motor Protection Teflon Oil 35 ML FORCE Engine By - offers you the FORCE Engine RC - Motor Protection in the practical dropper bottle - Made in Germany. It is a high-tech preservative oil with a high TEFLON content. The finest TEFLON beads form a protective layer and thus long-term preservation. A few drops in the carburetor and|or glow plug opening, or all other engine openings accessible from the outside are sufficient and with a few turns the agent is distributed to Allen relevant points. Moving parts and the inside of the engine are protected and preserved. Protection against oxidation, lubrication and preservation for months. Teflon is a registered trademark of DuPont. Modeling items are not toys and therefore not suitable for children under the age of 14! Multi charging cable 14 in 1 gold contact Futaba JR Tamiya T connector Deans Mi.
After Run Motor-Reinigung 100ml Nitro-Pflege Nitromotor FORCE Engine By partCore - offers you engine cleaning after-run by FORCE Engine - Made in Germany. Perfect for motors in model building. Dissolves and reliably neutralizes aggressive combustion residues. Protects the engine from corrosion. After each engine run, put a few drops in the carburetor or glow plug opening and crank briefly. Modeling items are not toys and therefore not suitable for children under the age of 14! JR Graupner Uni connector servo connector gold contacts 10 pieces 100068 Rotor start backplate electric starter engine rebuild plate Left Force Motor Buggy tire rim set Street with 5 double spoke rim black 1:8 4 pieces part Nitro Engine Glow Plug Assortment Hot Medium Cold FORCE Engine B4 B5 B6 252012 Multi charging cable 14 in 1 gold contact Futaba JR Tamiya T connector Deans Mini Tamiya Bat.
25mm Bore Silicone Polyester Reinforced Exhaust Hose Black - Easy to replace, cut and adapt to your piping needs. Reinforced silicone hoses are used in a huge range of applications ranging from trucks, buses, high-performance production cars, Formula One, World Rally Champions & saloon car racing.
Losi Exhaust Spring Tool 1/8th for Losi 8IGHT & 8IGHT-X - Compatible with: Losi 8IGHT, Losi 8IGHT-X. Easily installs and removes springs that secure exhaust header to the engine and tuned pipe to header. Heat-treated steel hook holds springs precisely without deflection.
RC Car Motorstopper Nitro Motor Internal Combustion Engine partCore - offers you the engine stopper for your RC cars with combustion engines. The engine stopper is an indispensable tool when it comes to shutting down your nitro engine without burning your fingers. So that you always have the engine stopper to hand, it has a belt clip and a key fob attachment hole. offers you models and equipment for everything to do with model sports in this section. In addition to selected branded products, we also products that we have produced for you - quality comes first here! Products are selected for you by the team, extensively tested in practice and packaged with attention to detail. The range extends from A for batteries to Z for accessories - it's worth taking a look, as we are constantly expanding the range for you. Strong brands at - We carry selected br.
Sweep Silicon Grease (5G) - Sweep's new Silicon Grease is high quality white silicone grease for use with ball-differentials in electric powered cars of all scales.
Team Associated Silicone Diff Fluid 500,000 CST 59ml 500K - This is a popular basic set up, I tend to like to run a thicker diff in the front, to smooth out the aggressive steering, and a thinner in the middle, to smooth out the acceleration and punch, so 7000-5000-3000.
Team Associated Silicone Diff Oil 1,000,000 CST 59ml 1M - This is a popular basic set up, I tend to like to run a thicker diff in the front, to smooth out the aggressive steering, and a thinner in the middle, to smooth out the acceleration and punch, so 7000-5000-3000.
RC Nitro After Run Oil 80ml - All warranty claims must be handled through RC High Performance Hobbies and not your hobby dealer. RC Electric Battery Adapter Tamiya Y Extension. RC Electric Battery Adapter Deans Male To Micro Tamiya Female.
Absima Silicone Shock Oil "100CPS" 60ml - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Absima Silicone Shock Oil "250CPS" 60ml - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Absima Silicone Shock Oil "150CPS" 60ml - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Absima Silicone Shock Oil "750CPS" 60ml - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Absima Silicone Shock Oil "650CPS" 60ml - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Absima Silicone Shock Oil "200CPS" 60ml - Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Traxxas Silicone Grease TRX1647 Grease Slash Summit Maxx E-Revo Hoss Rustler - eBay demo item Traxxas silicone grease Item description Lovers of Traxxas RC model cars will find what they are looking for with us: Use original Traxxas replacement and tuning parts to get the best out of your Traxxas RC car. Please note under the point -> More information data sheet Manufacturer Traxxas Manufacturer item number TRX1647 EAN 020334164704 Traxxas vehicle type Bandit, BIGFOOT No.1, Drag Slash, E-Revo 1:16, Ford F-150 Raptor, Hoss 4x4 VXL, Rustler 2WD, Rustler 4WD, Slash 1:16, Slash 2WD, Slash 4WD, Summit 1:16, Stampede , Maxx.
Doppelluftfilter Set kyosho MP9 Corrugated Profile 6 Piece With 45 ML Oil hype - Special air filter made of high-quality material, with an exact fit in the air filter housing. Due to the special, white filter material, the effective degree of contamination can be easily determined. In addition, in combination with the enclosed filter oil, the saturation of the filter can be adjusted perfectly. Perfect for kyosho models of the Inferno GT, Inferno GT 2, Inferno ST, Inferno MP and MAD Force series. Modeling items are not toys and therefore not suitable for children under the age of 14! Strong brands at partCore - we carry selected branded products from kyosho for you. JR Graupner Uni connector servo connector gold contacts 10 pieces partCore 100068 Rotor start backplate electric starter engine rebuild plate Left Force Motor partCore Multi charging cable 14 in 1 gold c.
Heng Long HL Smoke Oil 15ml - You might also like. RC Electric Battery Adapter XT60 Male To Tamiya Female. RC Electric Battery Adapter Deans Male To Deans Female. RC Electric Battery Adapter Deans Male To Micro Tamiya Female. RC Electric Battery Adapter Tamiya Y Extension.
61050D RC Car Buggy Truck Diff Oil #5000 80ml - All warranty claims must be handled through RC High Performance Hobbies and not your hobby dealer. RC Electric Battery Adapter Tamiya Y Extension. RC Electric Battery Adapter Deans Male To Micro Tamiya Female.
61300D RC Car Buggy Truck Diff Oil #30000 80ml - All warranty claims must be handled through RC High Performance Hobbies and not your hobby dealer. RC Electric Battery Adapter Tamiya Y Extension. RC Electric Battery Adapter Deans Male To Micro Tamiya Female.
61080S RC Car Buggy Truck Shock Oil #800 80ml - All warranty claims must be handled through RC High Performance Hobbies and not your hobby dealer. RC Electric Battery Adapter Tamiya Y Extension. RC Electric Battery Adapter Deans Male To Micro Tamiya Female.
Olimat DBXL Un-Silenced Exhaust Pipe For Losi DBXL - Compatible with: Losi DBXL. Colour: Raw. Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. Position: Exhaust. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Olimat Baja 5T/5SC Un-Silenced Exhaust Pipe For HPI Baja 5T 5SC KM T1000 - Compatible with: HPI Baja 5T, HPI Baja 5SC, KM T1000. Colour: Raw. Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. Position: Exhaust. Dyno developed performance exhausts, competition tested and proven.
Tamiya 22006 - Silicone Diff. Oil #4.000 40ml - New - ms pluethhttps://www.ebaystores.de/ms-plueth#BF392Bms plueth1 - Plastic bottle with 40ml content for approx. 22 diff fillings (1/10 touring car diffs) In connection with the sale of batteries or with the delivery of devices containing batteries included, we are obliged to draw your attention to the following: As an end user, you are legally obliged to return used batteries. You can use old batteries, that we carry or have carried as new batteries in our range, free of charge at our dispatch warehouse (shipping address) return. The symbols shown on the batteries have the following meaning: The symbol of the crossed-out wheeled bin means that the battery should not be disposed of with household waste Cd = battery contains more than 0.002 percent by mass of cadmium Hg = battery con.
After Run Motor Cleaning 100 ML Internal Combustion Engine Care Gear-Flon Nitro - GEAR-FLON stands for a high-performance grease and oil based on TEFLON | PTFE base. Ideal for applications in model making. Finest PTFE particles | Beads adhere to any surface, such as metal, plastic or wood, and close even the smallest pores on a micro level. A smooth protective and lubricating film is created that creates much less friction and does not bind dirt. A good example is like rubbing ice on ice. Friction is reduced by up to 80% and thus prevents wear. Furthermore, a long-term preservation is formed against all external influences, such as moisture [salt] water and hand sweat, thus preventing rust formation and corrosion. The PTFE | The TEFLON layer remains even when no more grease or oil is visible and forms a dry lubrication with emergency running properties. Gearboxes, ball.
Fastrax Racing Pure Silicone Oil 35Wt 50ml - FAST60-35 - Jarilo design. made with love by. Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Fastrax Racing Pure Silicone Oil 60Wt 50ml - FAST60-60 - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 10000CST 50ml - FAST61-10K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 60000CST 50ml - FAST61-60K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 500000CST 50ml - FAST61-500K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 15000CST 50ml - FAST61-15K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 20000CST 50ml - FAST61-20K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 3000CST 50ml - FAST61-3K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 7000CST 50ml - FAST61-7K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Fastrax Racing Pure Silicone Diff Oil 100000CST 50ml - FAST61-100K - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Tamiya PS-9 Green Polycarbonate Spray - Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand, using Tamiya bottle paints for polycarbonate.
Motorkollektor Stick For Cleaning team orion ORI41602 706138 - Motor collector stick for cleaning team orion ORI41602 offers you this original team orion item at a great price! Practical tool for cleaning the collectors of your brushed electric motor. Modeling items are not toys and therefore not suitable for children under the age of 14! offers you high-quality products from the team orion brand. Whether it's selecting batteries, inventing V2 motor technology, introducing LiPo batteries in the RC car sector or inventing CRF motor technology: we always want to be faster, more attractive and cheaper than the competition. Global success proves team orion right. team orion is a multinational company and its products are synonymous with racing performance, the highest quality standards and Swiss technology. team orion is off-road and on-road world cha.
Traxxas TRX 5035 Damper Oil Silicone 60 Wt 700 Cst E-Revo 2.0 TRX-4 Slash - Traxxas Damper Oil Silicone for eg E-Revo VXL 2.0 TRX-4 Slash Visit our Ebay Store There you will find more articles at top prices and thereby save on shipping costs Warning : Not suitable for children under 14 years.
Bondloc B222-10 B222 Screwlock Low Strength Threadlocker - Bondloc B222 Screwlock is a Thixotropic Anaerobic Threadlocker of Low Strength designed for easy disassembly of treated components. Bondloc Screwlock Low Strength Threadlocker. Typical Strength: ISO10964: 6Nm M10’s.
Grease Gun with Marine Grease 5 oz S-DYNE4200 - The Dynamite Marine Grease Gun allows boaters to apply grease easily and neatly to their models' moving parts. Dynamite's waterproof Marine Grease adheres to most surfaces. Lithium complex grease with anti-sling technology for superb adhesion.
Dynamite Marine Grease 5oz DYNE4201 - Part Number: DYNE4201. Manufacturer: Dynamite. Pro Boat’s waterproof Marine Grease adheres to most surfaces. Lubricant Type: Marine Grease. Lithium complex grease with anti-sling technology for superb adhesion.
(40 €/ 100g) 35g Äronix Copper Kontaktpaste Cu Synthet. Electrics Assembly Model - If, despite our careful inspection, something is wrong with the goods, please contact us. There is always a solution. You will receive a syringe with 35g content. You can find other container sizes in our shop! We also have ALU contact paste in the shop! This is used for silver or silver-colored contact points are used. -For the lubrication and preservation of all types of electrical contacts, including those used at extremely low temperatures. -Can be used on Allen movable electrical sliding and friction points without causing misfires or disruptions in the process -Contact bridge on statically charged metals, for ground connections, ground cables, power cables, etc. Soap type: Synth. metal saponified paste with metal grinding pigments and conductivity improvers Security: .
Fastrax Pure Silicone RC Shock Oil 50ml - Testing has been conducted in conditions ranging from the heat of Spain to the rain of the UK to provide the best levels of consistency possible. If you are looking to make the winners circle, then choose Fastrax oils.
Rock Oil Brake Kleen 400ml for 1/5th Scale RC Baja, Losi 5ive, 30DNT - Colour: N/A. Note: All Images are for illustrative purposes only. Colour shades may be different to that shown. AB31-AB38, AB41-AB56, FK17-FK21,HS1-HS9,IV1-IV63,KA27-KA28,KW0-KW17,PA20-PA78, PH15-PH50, ZE1-ZE3, GY, JE.
Scorpion Motor Bearing Lubrication Kit (23ml) (Alu cap) - SC-LUBRI-ALU - You have to remove the screw inside the Aluminium cap before use. The Scorpion Motor Bearing Lubrication Kit will help you maintain the bearings in your Scorpion brushless electric motor. Without proper lubrication, the balls in the bearings can wear out quickly, leading to premature failure.
TLR 50000CPS Silicone Differential Oil - Effects of Differential Oil. differential because it “overloads”. Front Differential. Centre Differential. Rear Differential. Using thicker oil will make the car turn more on power, out of the corner, and accelerate faster.
(54 €/ 100g) 20g Äronix Copper Kontaktpaste Cu Synthet. Electrics Assembly Model - If, despite our careful examination, something is wrong with the goods, we ask you to contact us. There is always a solution. We also have ALU contact paste in the shop! This is used for silver or silver-colored contact points are used. -For the lubrication and preservation of all types of electrical contacts, including those used at extremely low temperatures. -Can be used on Allen movable electrical sliding and friction points without causing misfires or disruptions in the process -Contact bridge on statically charged metals, for ground connections, ground cables, power cables, etc. Soap type: Synth.
16mm - 5/8" Silicone Polyester Reinforced Hose for 30DNB - Polyester reinforced multi layered reinforced construction makes them ideal to replace old rubber hoses and particularly suited for all custom coolant plumbing applications and forced induction installations.
Team RCMZ Baja Full Replacement Bearing Set 5B 5T 5SC KM BUGGIES - HPI Baja 5SC. HPI Baja 5B. HPI Baja 5T. (4) 5x10x4 KM Part Number: D01. HPI Part Number: B021. All bearings are ABEC rated and rubber sealed. (4) 10x15x4 KM Part Number: D02-10mm. HPI Part Number: B030, B080.
Team RCMZ Losi 5ive-T, KMX2 & 30 DNT Full Replacement Bearing Set - Compatible with: Losi 5ive-T, King Motor X2, 30 Degree North Truck, Rovan LT, Losi 5ive-T 2.0. Inner Wheel Hub Bearing (X4) 20x32x7mm - KM Part:X56074 Losi: LOSB5971. Servo Saver Bearing (X4) 10x15x4mm - KM Part:X56071 Losi: LOSB5970.
Silicone Shock oil 35WT 425CST 59ml - Factory Team Silicone Fluids are made of the highest quality materials and are laboratory-tested, resulting in a high-performance blend of premium silicone that provides more consistent differential action as well as longevity.
Castrol POWER1 2T Clean Burn Part Synthetic 2 Stroke Engine Oil - Castrol POWER1 2T with Clean Burn Formula provides long lasting performance. It also protects from seizure under most arduous riding conditions and allows for fast and easy cold starts. The unique Power Release Technology™ boosts performance by optimising friction and enabling it to accelerate faster, providing superior acceleration at the touch of the throttle.