Underfloor Heating Thermostat Temperature Controllers WiFi Programmable Touch

£12.99 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller ezheat ✉️ (11,009) 99.9%, Location: Ipswich, GB, Ships to: GB, Item: 162674650101 Underfloor Heating Thermostat Temperature Controllers WiFi Programmable Touch.
  • Visit Store
  • Feedback
  • Newsletter Sign Up
  • Contact us
Shop Categories

Thermostats for Underfloor Heating

  • • Electric Floor Heating
  • • Water Floor Heating
  • • Thermostats
  • • Insulation
  • • Wetroom shower kit
  • • Tile Backer Boards
  • • Mirror Demisters
  • • Fittings
  • • Other
Description

Ezheat Thermostats are ultra-compact and provide easily to configure control for the timings and temperature settings for most Heating systems, including Electric or Wet Underfloor Heating Systems.

Manual Thermostat

The Ezheat Manual Thermostat is ultra-compact, provides precise control and is easily configured to control the temperature of electric or Wet Underfloor Heating Systems.

Features:

- 2-pole safety power switch, on/off control output for heating device.

- Shuts down the output when the heating is over the chosen limit to protect flooring.

Manual Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

Technical Specs:

    ↵

    ↵​​​​​​​

  • Voltage: AC100- 240V 50/60Hz
  • Power Consumption: 5W
  • Power load: 16A*
  • Limitation range: 25°c~55°c
  • Switching differential: ±1°c
  • Ambient temperature: -5~40°c
  • Protective housing: IP20
  • Housing material: Anti-flammable PC
  • Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
  • Dimension: 86mm X 86mm X16mm flush mount
  • Certification: CE

* – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the requirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real-life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading. If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.

Programmable Thermostat

​​​​​​​Features:

- 2-pole safety power switch, On/off control output for heating device.

- Built-in 10K NTC sensor & external floor sensor, three control mode available.

- Shut down output when heating is over set temperature limit to protect your floor.

- 7-days Programmable or non-programmable available.

- Up to 6 heating periods per day.

- Keep user setting during power loss.

- ​​​​​​​Can be set so that sensing is floor only, air only, or air and floor.

Programmable Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

Technical Specs:

    ↵

    ↵​​​​​​​

  • Voltage: AC100- 240V 50/60Hz
  • Power Consumption: 2W
  • Power load: 16A*
  • Limitation range: 0°c~90°c
  • Switching differential: ±1°c
  • Ambient temperature: -5~50°c
  • Protective housing: IP20
  • Housing material: Anti-flammable PC
  • Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
  • Dimension: 86mm X 86mm X16mm flush mount
  • Certification: CE

* – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the requirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real-life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading. If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.

Touchscreen Programmable Thermostat

​​​​​​​Features:

- 2-pole safety power switch, On/off control output for heating device.

- Built-in 10K NTC sensor & external floor sensor, three control mode available.

- Shut down output when heating is over set temperature limit to protect your floor.

- 7-days Programmable or non-programmable available.

- Up to 6 heating periods per day.

- Keep user setting during power loss.

- Keylock Function​​​​​​​.

- ​​​​​​​Can be set so that sensing is floor only, air only, or air and floor.

Programmable Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

    ↵

    ↵​​​​​​​

  • Voltage: AC100- 240V 50/60Hz
  • Power Consumption: 2W
  • Power load: 16A*
  • Setting range: 5°c~90°c
  • Limitation range: ​​​​​​​5°c~60°c (factory setting 35°c
  • Switching differential: 0.5°c
  • Ambient temperature: -5~50°c
  • Protective housing: IP20
  • Housing material: Anti-flammable PC
  • Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
  • Dimension: 86mm X 86mm X16mm flush mount
  • Certification: CE

Technical Specs:

* – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the requirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real-life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading. If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.

WiFi Programmable Thermostat

Features:

  • WiFi Programmable via Smartphone / App
  • Easy to Use
  • 7 Days Programmable
  • Up to 6 heating periods per day
  • Compatible with Amazon Alexa and Google Home

Included in the box:

  • 1x Thermostat
  • 1x User Guide
  • 2x Screws
  • 1x Floor Sensor (2.5m)
Technical Specs:

Power Supply: 95 ~ 240 VAC, 50 ~ 60HZ

Current Load: 3A (water heating/water boiler/gas boiler) - 16A (electric heating)

Sensor: NTC

Accuracy: ±0.5℃ or ±1℉

Set Temp. Range: 5 -35

Display Temp. Range: 5 ~ 99

Ambient Temp: 0 ~ 45 ℃

Ambient Humidity: 5 ~ 95 % RH (Non Condensing)

Storage Temp: -5 ~ 45 ℃

Power Consumption: <1.5W

Timing Error: < 1% Shell

Material: PC +ABS ( flame retardant)

Installation Box: 86 * 86mm Square

Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm2

Protection Class: IP20

WiFi Delxue Programmable Thermostat

    ↵

    ↵​​​​​​​

Overall Dimensions: 87 x 87 x 42mm

Supply Voltage: 85-265vac 50/60hz

Standby Power: <2W

IP Rating: IP21

Maximum Switching Current: 15A

Wire Diameter: ≤2.5mm²

Technical Specs:

The Adept T6100 Wifi Thermostat is a smartphone controllable stat perfect for use with underfloor heating systems or for use with electric heating devices or valve actuators.

The Adept T6100 Thermostats allow you to use the included free app from your smartphone (available for both IOS and Android devices) to control the temperature of your heating device. The T6100 gives you accurate and precise control anywhere in the home and is a premium choice for any household. 

You can also use voice control via Amazon Alexa and Google Home devices, along with easily being able to share devices among family members.

The app allows you to easily set your optimum settings right from your mobile device, making quick changes a breeze.

​​​​​​​Features:

- Smartphone Controllable via App

- Time Display

- Holiday Function

- Off Time Frost Protection

- Reverse Output Function

- Floor High-Temperature Protection

- Open Window Detection Function

- Key-Lock

- Sensor Selection

- Hold Function

Programmable Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

See our other items

Ezheat Thermostats are ultra-compact and provide easily to configure control for the timings and temperature settings for most Heating systems, including Electric or Wet Underfloor Heating Systems.

Thermostats for Underfloor Heating

Description

Ezheat Thermostats are ultra-compact and provide easily to configure control for the timings and temperature settings for most Heating systems, including Electric or Wet Underfloor Heating Systems.

Manual Thermostat

The Ezheat Manual Thermostat is ultra-compact, provides precise control and is easily configured to control the temperature of electric or Wet Underfloor Heating Systems.

Features:

- 2-pole safety power switch, on/off control output for heating device.

- Shuts down the output when the heating is over the chosen limit to protect flooring.

Manual Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

    ↵

    ↵​​​​​​​

  • Voltage: AC100- 240V 50/60Hz
  • Power Consumption: 5W
  • Power load: 16A*
  • Limitation range: 25°c~55°c
  • Switching differential: ±1°c
  • Ambient temperature: -5~40°c
  • Protective housing: IP20
  • Housing material: Anti-flammable PC
  • Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
  • Dimension: 86mm X 86mm X16mm flush mount
  • Certification: CE

Technical Specs:

* – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the requirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real-life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading. If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.

Programmable Thermostat

​​​​​​​Features:

- 2-pole safety power switch, On/off control output for heating device.

- Built-in 10K NTC sensor & external floor sensor, three control mode available.

- Shut down output when heating is over set temperature limit to protect your floor.

- 7-days Programmable or non-programmable available.

- Up to 6 heating periods per day.

- Keep user setting during power loss.

- ​​​​​​​Can be set so that sensing is floor only, air only, or air and floor.

Programmable Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

    ↵

    ↵​​​​​​​

  • Voltage: AC100- 240V 50/60Hz
  • Power Consumption: 2W
  • Power load: 16A*
  • Limitation range: 0°c~90°c
  • Switching differential: ±1°c
  • Ambient temperature: -5~50°c
  • Protective housing: IP20
  • Housing material: Anti-flammable PC
  • Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
  • Dimension: 86mm X 86mm X16mm flush mount
  • Certification: CE

Technical Specs:

* – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the requirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real-life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading. If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.

Touchscreen Programmable Thermostat

​​​​​​​Features:

- 2-pole safety power switch, On/off control output for heating device.

- Built-in 10K NTC sensor & external floor sensor, three control mode available.

- Shut down output when heating is over set temperature limit to protect your floor.

- 7-days Programmable or non-programmable available.

- Up to 6 heating periods per day.

- Keep user setting during power loss.

- Keylock Function​​​​​​​.

- ​​​​​​​Can be set so that sensing is floor only, air only, or air and floor.

Programmable Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

    ↵

    ↵​​​​​​​

  • Voltage: AC100- 240V 50/60Hz
  • Power Consumption: 2W
  • Power load: 16A*
  • Setting range: 5°c~90°c
  • Limitation range: ​​​​​​​5°c~60°c (factory setting 35°c
  • Switching differential: 0.5°c
  • Ambient temperature: -5~50°c
  • Protective housing: IP20
  • Housing material: Anti-flammable PC
  • Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
  • Dimension: 86mm X 86mm X16mm flush mount
  • Certification: CE

Technical Specs:

* – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the requirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real-life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading. If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.

WiFi Programmable Thermostat

Features:

  • WiFi Programmable via Smartphone / App
  • Easy to Use
  • 7 Days Programmable
  • Up to 6 heating periods per day
  • Compatible with Amazon Alexa and Google Home

Included in the box:

  • 1x Thermostat
  • 1x User Guide
  • 2x Screws
  • 1x Floor Sensor (2.5m)
Technical Specs:

Power Supply: 95 ~ 240 VAC, 50 ~ 60HZ

Current Load: 3A (water heating/water boiler/gas boiler) - 16A (electric heating)

Sensor: NTC

Accuracy: ±0.5℃ or ±1℉

Set Temp. Range: 5 -35

Display Temp. Range: 5 ~ 99

Ambient Temp: 0 ~ 45 ℃

Ambient Humidity: 5 ~ 95 % RH (Non Condensing)

Storage Temp: -5 ~ 45 ℃

Power Consumption: <1.5W

Timing Error: < 1% Shell

Material: PC +ABS ( flame retardant)

Installation Box: 86 * 86mm Square

Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm2

Protection Class: IP20

WiFi Delxue Programmable Thermostat

The Adept T6100 Wifi Thermostat is a smartphone controllable stat perfect for use with underfloor heating systems or for use with electric heating devices or valve actuators.

The Adept T6100 Thermostats allow you to use the included free app from your smartphone (available for both IOS and Android devices) to control the temperature of your heating device. The T6100 gives you accurate and precise control anywhere in the home and is a premium choice for any household. 

You can also use voice control via Amazon Alexa and Google Home devices, along with easily being able to share devices among family members.

The app allows you to easily set your optimum settings right from your mobile device, making quick changes a breeze.

​​​​​​​Features:

- Smartphone Controllable via App

- Time Display

- Holiday Function

- Off Time Frost Protection

- Reverse Output Function

- Floor High-Temperature Protection

- Open Window Detection Function

- Key-Lock

- Sensor Selection

- Hold Function

Programmable Thermostat Includes:

1x remote floor sensor  | 2x fixing screws | 1x Installation Manual

    ↵

    ↵​​​​​​​

Overall Dimensions: 87 x 87 x 42mm

Supply Voltage: 85-265vac 50/60hz

Standby Power: <2W

IP Rating: IP21

Maximum Switching Current: 15A

Wire Diameter: ≤2.5mm²

Technical Specs:

See our other items

Ezheat Thermostats are ultra-compact and provide easily to configure control for the timings and temperature settings for most Heating systems, including Electric or Wet Underfloor Heating Systems.

  • Condition: New
  • Colour of Thermostat: White
  • Type of Thermostat: Manual Dial
  • Smart Home Compatibility: Amazon Alexa, Google Home/Assistant
  • Unit Quantity: 1
  • Sensor Technology: Room/Remote Sensor
  • Features: Built-In WiFi, Digital Display
  • Compatible Product: Underfloor Heating
  • Smart Home Protocol: Wi-Fi
  • MPN: T110
  • Unit Type: Unit
  • Brand: Adept
  • Control Style: WiFi, Dial, Touch
  • Type: Thermostats
  • Power (W): 2500-3999W
  • Room: Any Room
  • Application: Underfloor Heating

PicClick Insights - Underfloor Heating Thermostat Temperature Controllers WiFi Programmable Touch PicClick Exclusive

  •  Popularity - 245 watchers, 0.1 new watchers per day, 2,387 days for sale on eBay. Super high amount watching. 444 sold, 10 available.
  •  Best Price -
  •  Seller - 11,009+ items sold. 0.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive