Seller:johnnywatch✉️(2,974)99.8%,
Location:Nantwich, GB,
Ships to: GB & many other countries,
Item:165277824000Watch bezels for SKX007 Series SRPD Replacement Mod 20+ Designs. For All Bezels (Except CT206 Series):
Material – Stainless Steel 316L surgical grade HQ Divers Bezel
TIP – We strongly recommend that if you are considering to purchase a YM sloping ceramic insert to fit to your bezel rather than purchasing the insert and crystal individually that you take a look at our crystal and insert combo CT119 – The CT119 has a custom sapphire designed specifically to match the CT606 insert perfect – no gap – seamless fit – no need to mix and match from different sources – avoid potential sadness – we have done the work for you!
Fitting – Direct replacement for OEM bezel no mods required. The bezel on some cases will be a little tight and pressing on evenly by hand may not possible in these instances a Crystal Press should be used to apply an even high force to snap the bezel on – take care not to trap the gasket
BONUS – Bezel Gasket – New gasket supplied already fitted – We recommend adding a little grease to aid a smooth action
Please note In rare instances you may find they can be tight to fit we recommend the use of a crystal press to ensure an even high force when snapping the bezel on – A distinct snap sound will be heard as the bezel rides over the snap and sits down in the correct position.
Additional info – Functions exactly as OEM Bezel – complete with new bezel gasket already fitted. Easy installation a direct fit with no modification required. Designed for SKX007 size bezel inserts both oem and aftermarket. 2 FREE 3M adhesive rings supplied with each bezel for easy fitment of your insert. If you are considering a sloping YM ceramic insert take a look at our CT119 crystal and insert combo – perfect fit!
Suitable for:
200M 0020 case type SKX007 SKX009 SKX011 SKX171 SKX173 SKX175 SKXA35 SKX401K
Fitting/Removal – Direct replacement for OEM bezel no mods required. Simply press it on using a crystal press as in some cases they can be tight rendering pressing on by hand impossible. Removal is aided by a small champher at one point only on the bottom edge – we strongly suggest positioning this at the 6 0’clock position prior pressing the bezel on. The Pilot bezel does not need to be removed when removing the crystal, the crystal will press straight through from the inside.
No Gasket or Spring is required – press directly on.
Additional info – Top quality 316L SS, simple fitting, super cool look, 3 great finishes – no need to remove when changing crystal.
Suitable for:
200M 0020 case type SKX007 SKX009 SKX011 SKX171 SKX173 SKX175 SKXA35 SKX401K