PlastiDip Plasti Dip / Rubber Paint - Pre-Mixed - 1 Gallon Can - Sprayable Spray

£85.00 Buy It Now, FREE Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller plastidipukltd ✉️ (29,444) 99.8%, Location: Petersfield, GB, Ships to: GB, IE, Item: 152181046949 PlastiDip Plasti Dip / Rubber Paint - Pre-Mixed - 1 Gallon Can - Sprayable Spray. Show Menu
  • Description

    IMPORTANT PLEASE SEE PREPARATION AND APPLICATION GUIDE SUPPLIED WITH YOUR ORDER TO ENSURE BEST RESULTS

    Plasti Dip - The Original Peelable, Flexible, Insulating, Non-Slip, Durable, Rubber Coating!

    Sprayable Plasti Dip

    Plasti Dip Sprayable is the same great Rubber Dip now formulated to be sprayed directly from the can.

    Designed for auto detailers and customizers, Plasti Dip Sprayable is compatible with all Plasti Dip colors and thinners.

    PlastiDip is an air dried flexible liquid matt coating for use on virtually anything!

    PlastiDip resists alkaline, acids, salts, moisture, abrasion, and most chemicals, and is an insulating dielectric coating.It will not crack, chip or peel, and will remain flexible even under severe conditions (-34ºc to +93ºc).

    PlastiDip can be dipped, brush coated and sprayed. Add more layers for greater protection and grip.

    • WOOD: Seals and protects from weathering, and prevents splitting.
    • METAL: Reduces vibration, deadens sound, and prevents corrosion.
    • GLASS: Shatter proofs glass objects (available in clear).
    Also... PLASTIC, RUBBER, FIBREGLASS and CONCRETE SURFACES!

    NOTE: Surfaces which are non-absorbent such as metals should be primed using our recommended Primers, which are available in Clear and Grey.


    PLEASE READ: Guide to Preparation and Application

    The essential criteria is to ensure the surface is squeaky clean, grease, dirt, debris and contaminant free and thoroughly dry before coating.

    On vehicles or irregular shaped items, particular attention should be paid to the sills, trim, gutters, grills, any tight or hard to get to corners and gullies that you would not normally concentrate on.

    • Wash only with hot water as some soap detergents contain residues that Plasti Dip may not adhere to. • Never use any petroleum, citric, alcohol or solvent based cleaning/care products with Plasti Dip. • Do not use car care cleaning products such as wheel shines, paint wipes etc, as these often leave trace residues which could cause adhesion problems. • Remove all traces of previous wax or silicone residue from cleaning products using the correct de-greaser, particularly for metal and plastic surfaces. • Clean large areas with Plasti Dip Panel Wipe degreaser. • Small areas can be cleaned with Plasti Dip “Dip Care Prep Degreaser”. • Ensure all water is removed and the area thoroughly dry before coating.

    AEROSOLS – Refer to aerosol for instructions. Shake well before and during use. Test spray pattern on sample piece prior to application. In cold conditions, place aerosol in warm water (approximately 21°c) for 10-15 minutes before use.

    BLAZE COLOURS – Best applied over white Plasti Dip base coat.

    In common with all manufacturer’s advice, we recommend testing on a small inconspicuous area first to ensure suitability. Base colours can alter the final shade.

    If spraying, for a professional fine finish, Plasti Dip liquid should be filtered first. For best results, temperature of the spraying area should be between 10°c and a maximum of 27°c. Liquid Plasti Dip should be thinned 50/50 by weight. Apply the first coat as a mist coat and gradually build up the layers. The thicker the final coating, the easier it is to remove in the future should you wish. For vehicles, we suggest a minimum of 6-7 coats. For other projects a minimum of 2-4 coats is recommended depending on application method and coverage requirement.

    Layers are touch dry and re-coatable in 30-45 minutes at 16-22°c and totally cured/dry 24-48 hours depending on temperature. Increase drying times in colder conditions.

    Plasti Dip Primer is an adhesion promoter. Only use a primer to increase adhesion if you require a permanent coating. For permanent application, keying the surface with fine grit paper will improve adhesion if required.

    For extra protection of your investment and ease of cleaning, we recommend using Dip Care Sealant over the final coating.

    Please see our booklet supplied with your order for other handy tips and product information, including spray gun settings.

    If you have any concerns about the correct products or procedures for your project, please feel free to contact us.

     
  • Resources

    Resources

     
  • Colours *Please note that pictures are for illustration purposes only. *Please note that these swatch colours are for representation only and may not be a true likeness to the delivered product. Colours can be easily mixed together to create shade variations to the colour samples shown.

    Plasti Dip Colours Below are a selection of the Plasti Dip colours with nearest (approximate) Pantone and RAL colours shown.

    Regular Plasti Dip (Matt finish) Click Here to Browse Regular Plasti Dip Black Pantone Black 6 RAL: 9005 C:100 M:79 Y:44 K:93 Hex: 101820 White Pantone 663 RAL: 9010 C:0 M:0 Y:0 K:0 Hex: FFFFFF Red Pantone 7621 RAL: 3000 C:0 M:98 Y:91 K:30 Hex: AB2328 Clear Blue Pantone 7691 RAL: 5007 C:100 M:43 Y:0 K:30 Hex: 006298 Yellow Pantone 123 RAL: 1018 C:0 M:19 Y:89 K:0 Hex: FFC72C Orange Pantone 173 RAL: 2010 C:0 M:67 Y:85 K:19 Hex: CF4520 Brown Pantone 4975 RAL: 8014 C:36 M:84 Y:59 K:85 Hex: 3F2021 Green Pantone 7484 RAL: 6036 C:91 M:14 Y:78 K:60 Hex: 00573F Gunmetal Grey Pantone 7540 RAL: 7024 C:41 M:28 Y:22 K:70 Hex: 4B4F54 Tangerine Orange Pantone 1665 RAL: 2009 C:0 M:79 Y:100 K:0 Hex: DC4405 Blurple Pantone 433 RAL: 5004 C:90 M:68 Y:41 K:90 Hex: 1D252D Black Cherry Pantone 4975 RAL: 3007 C:50 M:100 Y:40 K:50 Hex: 3E2022 Flex Blue Pantone 541 RAL: 5010 C:100 M:58 Y:9 K:46 Hex: 003C71 Blaze Range(Matt finish) Click Here to Browse Blaze (Fluorescent) Plasti Dip Fluorescent Coatings emit bright light when exposed to UV radiation. A UV tube or black light is required for the ultimate effect. Pink Pantone 806 (closest match) RAL: 4003 C:0 M:72 Y:0 K:0 Hex: FF3EB5 Yellow Pantone 803 (closest match) RAL: 1016 C:0 M:3 Y:97 K:0 Hex: FFE900 Blue Pantone 2945 RAL: 5005 C:100 M:53 Y:2 K:16 Hex: 004c97 Green Pantone 7481 RAL: 6038 C:82 M:0 Y:86 K:0 Hex: 00B74F Purple Pantone 269 RAL: 5022 C:82 M:98 Y:0 K:12 Hex: 582C83 Red Pantone Warm Red (closest match) RAL: 3024 C:0 M:83 Y:80 K:0 Hex: F9423A Orange Pantone Orange 21 (closest match) RAL: 2004 C:0 M:65 Y:100 K:0 Hex: FE5000 HCF Range(Silk finish) Click Here to Browse HCF Coatings Black Pantone Black C (closest match) RAL: 9017 C:74 M:73 Y:75 K:100 Hex: 222223 White Pantone 663 RAL: 9010 C:0 M:0 Y:0 K:0 Hex: FFFFFF Red Pantone 7620 RAL: 3016 C:0 M:95 Y:94 K:28 Hex: B7312C Green Pantone 329 RAL: 6026 C:100 M:14 Y:60 K:49 Hex: 00685e Orange Pantone 173 RAL: 5002 C:0 M:82 Y:94 K:2 Hex: CF4520 Yellow Pantone 7408 RAL: 1021 C:0 M:29 Y:100 K:0 Hex: F6BE00 Grey Pantone 5497 RAL: 7042 C:38 M:9 Y:23 K:32 Hex: 829995 Blue Pantone 661 RAL: 5002 C:100 M:75 Y:0 K:6 Hex: 003594 CAMO RANGE(Matte finish) Click Here to Browse Camo Plasti Dip Available in four unique Earth-tone colours, is ideal for keeping your hunting, fishing and camping gear inconspicuous when you're in the wild. Khaki Green Pantone 417 RAL: 7009 C:33 M:23 Y:35 K:63 Hex: 65665C Brown Pantone 411 RAL: 7013 C:30 M:42 Y:34 K:75 Hex: 5E514D Tan Pantone 7536 RAL: 7032 C:11 M:13 Y:30 K:32 Hex: A69F88 Black Pantone Black 6 RAL: 9005 C:100 M:79 Y:44 K:93 Hex: 101820 ENHANCERS(Metakic /Pearl /Gloss finish) Click Here to Browse Plasti Dip Enhancers Specially designed to give a unique finish in Pearlizer. Metalizers add a shimmering metallic finish while letting the colour of the Plasti Dip show through. With Bright Aluminium metalizer best if used over matt black or flex blue. Bright Alu. Metalizer Copper Metalizer Silver Metalizer Gold Metalizer Pearlizer Custom Colours(Various finishs)

    If you require a specific or unique colour/shade of Plasti Dip mixed for you we can do it. Simply send us a sample of the colour you require or let us know the RAL code.

    Minimum order is 5 litres.

    Please be aware that we cannot repeat a batch, so make sure you order enough.

    If you wish to order a bespoke colour please contact us at [email address removed by eBay] or call our sales line on 01730 823 823.

    Bespoke Customised colours are available as a special order. *Please note that all pictures in this listing are for illustration purposes only. *Please note that these swatch colours are for representation only and may not be a true likeness to the delivered product. Colours can be easily mixed together to creat shade variations to the above colour samples.
  • Delivery

    Delivery

    We aim to dispatch all orders within 24 hours of receipt on a tracked 48 hour courier service (mainland UK only). Please contact our sales team for information and prices for Next-day and Saturday deliveries. Orders placed after midday Fri and during the weekend will be despatched the following Monday. Deliveries to Northern and Southern Ireland and some remote areas of Scotland can take up to 5 working days.

    Returns

    As an Internet Consumer you have the right to return your order within 7 days of receiving the goods, giving you time to inspect and consider your purchase. Notice of this must be received in writing via fax or e-mail. You must take reasonable care not to damage the product whilst it is in your possession, the item/s and packaging must NOT have been opened. The product in its original packaging must be returned at the expense of the consumer, we will inspect the product upon return to confirm that it has not been used before we process a refund normally within 7 working days from receipt).

    Please contact us before returning any items.

  • F. A. Q.s Plasti Dip - Protective Coating "Why am I getting a dull finish ?"

    Plasti Dip protective coating has a matte finish. If you are experiencing a cloudy or hazy finish, its likely to be caused by high humidity. Avoid these conditions or add approximately 5-10% of our Plastidip Thinners to reduce the problem.

    "Why is the Plasti Dip sagging or dripping ?"

    Removing an item too quickly when being dipped, is usually what causes this problem. Remove at a rate of 1 inch every 5 seconds. If experiencing runs or sags when spraying, move can further away from the surface and apply a lighter coat. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, and/or direct sun light. Ideal conditions are low humidity, and little to no air movement in a well ventilated area.

    "Is priming necessary ?"

    In some cases you do not need to prime the surface, but this is dependent on the type of material you are coating. Generally, for smooth non porous surfaces such as metal and uvpc we would always recommend using our Primer.

    "Why isn't my Blaze colour very bright?"

    To get the best colour result from the Blaze range of Plasti Dip, use it over a white base layer.

    "Is Plasti Dip safe to use on children's toys, animal containment and/or on kitchen utensils ?"

    Plasti Dip does not contain any heavy metals, and when completely dry, is considered harmless. However, it is not recommended that it be used on items that may be chewed or inserted into the mouth, as it may present a choking hazard.

    "How thickly can I apply Plasti Dip ?"

    When following the directions, you can apply as many coats of Plasti Dip protective coating as you like. For most applications 7-10 mils thickness is adequate. Only in extreme cases or for aesthetic reasons is more thickness necessary. (Note: a mil equates to 1000th of one inch).

    "Can I add a colourant or pigment to the Plasti Dip to create a custom colour ?"

    Mixing different colours of Plasti Dip protective coating can be done very simply to achieve other colours. We will soon have pigments available for sale in most popular colours. For most pigments, add approximately 1oz of pigment to 1 litre of Plasti Dip. Please also see our new product "Create Your Colour" which combines 5 pigments with a 651ml can of clear coating.

    "Can Plasti Dip be used to repair a damaged dishwasher rack ?"

    While Plasti Dip has been used for dishwasher rack repair in the past, it is not recommended. Our ReRACK product is much better suited for this application, and works very well.

    "Is Plasti Dip chemical resistant ?"

    Plasti Dip protective coating has excellent resistance to acids, alkaline, and most common household chemicals. However, it is best to test this before going ahead with your application. Plasti Dip does have limited resistance to petroleum based products. (Please see our "HCF" coating where contact with petroleum is required).

    "Can Plasti Dip be used to seal electrical connections ?"

    While Plasti Dip has excellent dielectric properties (insulates against shock), our Liquid Tape Electrical product is specifically formulated and conveniently packaged for this application.

    "Can Plasti Dip be applied to PVC ?"

    Rub acetone or finger nail polish remover in an inconspicuous area and apply Plasti Dip to test for success. We recommend applying HCF to UPVC surfaces.

    "Can you speed up the dry time of Plasti Dip ?"

    Very low oven heat (between 100° - 150°) may be used on a conveyor. However, the part or object should first set or hang dry for 30 minutes for the fast releasing solvents to escape.

    "Does Plasti Dip contain polyvinylchloride ?"

    Plasti Dip does not contain any polyvinylchloride or any other vinyl resins.

    "Is there any product on the market that can be applied over Plasti Dip to provide a glossy finish ?"

    Our Glossifer (F-799 Top Coat) will provide a glossy finish and is currently available in 750ml and 2.5 litre and 5 litre cans and soon aerosol.

    Super Grip - Non-skid Fabric Coating "Can I apply Super Grip directly to the floor surface ?"

    Absolutely not! Super Grip non-skid fabric coating is only designed for use on most fabric surfaces to stop skidding. Do not use Super Grip directly on wood, ceramic, concrete, or other types of flooring surfaces.

    "What if I get Super Grip on a surface I didnt intend to ?"

    DAP, Goo Gone, or mineral spirits can be used to clean up Super Grip, but try it in an inconspicuous area first to ensure the cleaning solution doesnt affect the surface you are cleaning.

    Plastiseam - Protective Coating "Can Plastiseam be used with underwater applications ?"

    While Plastiseam is designed to seal against moisture penetration in sewn seams, it is not recommended for applications requiring permanent submersion in water.

    VLP - Vinyl Repair "Can VLP be used to repair damaged dishwasher racks ?"

    While VLP has been used in the past to recoat damaged dishwasher racks. Our ReRACK product is specifically formulated and conveniently packaged for this application.

    "What is the difference between the VLP and Vyna Bond products ?"

    VLP is specifically designed for tears and splits in vinyl and some leathers, while Vyna Bond is specifically formulated and conveniently packaged for patching holes in vinyl, even under water.

    "Can VLP be sprayed ?"

    VLP can be sprayed by using a pressure-pot with a conventional spray gun and airless spray equipment. Please contact us for more information.

    Liquid Electrical Tape "What can I use to reduce Liquid Tape 'Electrical' if it becomes too thick, or if I need a thinned down Liquid Electrical Tape coating for my application ?" "What is dielectric strength ?"

    Dielectric strength refers to a materials ability to insulate against electrical shock. Liquid Tape 'Electrical', being rubber based, provides excellent electrical insulation and is suitable for all types of applications. Further dielectric information is available upon request.

    "Can Liquid Tape 'Electrical' be removed ?"

    Yes, carefully cut and peel Liquid Tape 'Electrical' from the repair area. (Be sure to follow all health and safety warnings as well as local electrical codes when working with electricity).

    Vyna Bond - Leather & Vinyl Repair "Can I use Vyna Bond on leather and other fabrics ?"

    While Vyna Bond is meant for use on vinyl and comes with a vinyl swatch for patching, it also works well on other porous fabrics and materials. It's best to test the suitability of Vyna Bond for your vinyl repair applications.

    "What is the difference between the VLP and Vyna Bond products ?"

    VLP is specifically designed for tears and splits in vinyl and some leathers, while Vyna Bond is specifically formulated and conveniently packaged for patching holes in vinyl, even under water.

    "Can Vyna Bond be sprayed ?"

    Vyna Bond can be sprayed by using a pressure-pot with a conventional spray gun and airless spray equipment. Please contact us for more information.

    Industrial Questions: "My application requires temperatures outside the range listed on your Technical Data Sheet [TDS]. Can the product go higher or lower in temperature than the range states ?"

    Generally yes, however it depends on the length of time and also how the coating is expected to perform at that temperature. If the coating will not be impacted, expected to resist abrasion, chemicals or not stick to itself or another surfaces at lower or higher temperatures, and if the period of time is relatively short, most of our coatings will go outside the range before either becoming affected negatively. Its always best to test if this is a critical feature, and use a 'common sense' approach.

    "The MSDS says the product is flammable or hazardous. Does this mean it’s flammable or hazardous in its liquid state or after it’s applied and allowed to adequately dry ?"

    Good question. Many customers confuse MSDS information [based on liquid properties only] for physical properties of the applied and properly cured product. They are very different. MSDS information is for transportation, safety, health and environmental reporting purposes only of the liquid product. Always review the TDS for the product's physical properties after completely drying.

    "How do I calculate the amount of coating I need for my project ?"

    First determine how many mils* thick you require the product to be applied when dry. Then calculate the square foot of the surface area of each part to be coated. Using the square foot coverage information provided on the TDS, you can easily calculate how many square feet per gallon you can expect at a given mil thickness.

    For example, if you determine you require 10 mils DFT [dry film thickness] and the TDS states 40 square feet @ 5 mils, divide the 40 square feet by 2. The 20 square feet per litre would then become twice the thickness or 10 mils dft. You can multiply or divide accordingly to achieve your estimated per litre coverage. (*mils: 1 mil = 1000th of 1 inch).

    By dividing into your cost per litre for the product you can then theoretically estimate the amount of material needed for the job, as well as a rough cost per square foot. Always assume you will have some waste whether you are dipping [usually 5% waste], brushing [usually 10% waste] or spraying [usually 10-25%] depending on shape and complexity of parts being coated. These are estimates only and common sense must be used when calculating material usage.

    "The product TDS states I must sheer mix the product. What does sheer mixing mean, and how does that differ from using a stir stick or paddle mixer ?"

    Sheering or aggressive dispersion is necessary for products that gel or coagulate in cold weather, transportation or long term storage. Most of our vinyl based Muraculon products require this type of mixing. High speed combined with a Cowles dispersion blade or similar is required along with carefully following the TDS mixing instructions. Over 95% of all application/finish complaints stem from improper or inadequate product mixing. Please read and follow instructions very carefully!

    In many cases we have several colours available in the product you need. If you can supply us with a 2 inch x 2 inch colour swatch, we can check to see if we can match the colour youre looking for or something very close. In most cases we can offer a Bespoke colour service for a small addition charge. We require a 5 litre minimum order for Bespoke colour requests.

    "Does your company offer technical support ?"

    Yes, we offer technical support on 3 levels.

    • 1. You can access many of our MSDS and TDS through our website.
    • 2. Call, write or email us, and we will get back to you as soon as we can. Provide us with as much detail as possible; we cant have too much information about your application. We may also ask you to send us a sample or actual part you are interested in coating so we can evaluate your application specifics and provide you with the best overall coating.
    • 3. On-site visits. In some cases our Technical Team will offer to come and visit you to discuss your technical requirements. Technical support is what sets us apart from our competitors.
    ABBREVIATIONS USED:

    TDS: Technical Data Sheet.

    MSDS: Manufacturer's Safety Data Specification/Sheet.

    MILS: One mil is equivalent to 1000th of one inch.

    DFT: Dry Film Thickness

  • Contact

    Contact Details

    Due to new ebay rules we are unable to provided email or telephone number for support. Please contact us through ebay and we will be happy to help with any sales, technical or other enquiries.

    Contact Us - Click Here

  • Feedback

    Complaints/eBay Feedback

    We at Plastidip UK Ltd make every effort to provide a good service to our customers, therefore if you have any problems with your purchase or complaints about the company, eBay listings or our products, please contact us so that we can try to resolve the issues before leaving negative feedback.

Make it stand out... Pro FX Pigments Need Technical Help?Contact Us Talk to Customer CareContact Us Plasti Dip Ideas Inspire Yourself © Plasti Dip UK Built by CJAT Tech
  • Condition: New
  • Size: 1 Gallon (U.S.)
  • Colour: Black
  • Brand: Plasti Dip
  • Type: Rubberised Paint
  • Country/Region of Manufacture: United States

PicClick Insights - PlastiDip Plasti Dip / Rubber Paint - Pre-Mixed - 1 Gallon Can - Sprayable Spray PicClick Exclusive

  •  Popularity - 107 watchers, 0.0 new watchers per day, 2,804 days for sale on eBay. Super high amount watching. 15 sold, 0 available.
  •  Best Price -
  •  Seller - 29,444+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive