STM32F103RC8T6 STM32F103RC8T6 ARM Cortesx-M3 Leaf Maple Mini Module for STM32 UK.
STM32F103RC8T6 STM32F103RC8T6 ARM Cortesx-M3 Leaf Maple Mini Module for STM32 UK
STM32F103C8T6 #1
STM32F103C8T6 STM32 Minimum System Development Board Module For Arduino
Brand new and high quality.
Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
On-board Mini USB interface, you can give the board power supply and USB communication.
Size:22.86mm x 253.34mm.
Package includes:1 x STM32F103C8T6 Minimum System Development Board
STM32F103C8T6 #2
Processor: STM32F103RC8T6, 32 ARM Cortex-M3 processor
Frequency: 72 MHz
128 KB Flash and 20 KB SRAM
34 digital io ports (GPIOs)
12 16-bit precision PWM port
9 12 precision analog input (ADC) port
2 SPI channel
2 I2C channel
7-channel direct memory access (DMA) (dma.h)
3 USART (serial) channel
An enhanced and three general purpose timers
Can be downloaded directly via the USB port and communications program
An external JTAG
Nested Vectored Interrupt Controller (NVIC) (including GPIOs on the external interrupt)
Support for low-power, sleep and standard mode (<500 μA)
Operating Voltage: 3.3 V
Input Voltage (recommended): 3 V - 12 V
Size: 2.02 "× 0.72"
Maple Mini has a total of 34 input / output pins, numbered from D0 to D33. Maple Mini label on the screen corresponds to the port and its adjacent. However, they have some of the default has a special purpose.
D23 is the USB port D +, D24 is the USB D-. Such as their use as GPIO, then your program must first disable the USB port. But you know, disable USB serial bootloader means that priority will not work, you will need to pass Perpetual Bootloader for the next update.
Port D32 is the Mini button port. Therefore, it is mainly used as an input port. When the key is pressed, the magnetic port will read high.
Port D33 is the Mini LED port. Therefore, its main role is as an output port. When it was written with high, LED lights will be lit
Package Included:1 x Mini USB STM32F103RC8T6 ARM Cortex-M3 leaflabs Leaf Maple Mini Module F Arduino
STM32F103RCBT6
Processor: STM32F103RCBT6, 32 ARM Cortex-M3 processor
Frequency: 72 MHz
128 KB Flash and 20 KB SRAM
34 digital io ports (GPIOs)
12 16-bit precision PWM port
9 12 precision analog input (ADC) port
2 SPI channel
2 I2C channel
7-channel direct memory access (DMA) (dma.h)
3 USART (serial) channel
An enhanced and three general purpose timers
Can be downloaded directly via the USB port and communications program
An external JTAG
Nested Vectored Interrupt Controller (NVIC) (including GPIOs on the external interrupt)
Support for low-power, sleep and standard mode (<500 μA)
Operating Voltage: 3.3 V
Input Voltage (recommended): 3 V - 12 V
Size: 2.02 "× 0.72"
Maple Mini has a total of 34 input / output pins, numbered from D0 to D33. Maple Mini label on the screen corresponds to the port and its adjacent. However, they have some of the default has a special purpose.
D23 is the USB port D +, D24 is the USB D-. Such as their use as GPIO, then your program must first disable the USB port. But you know, disable USB serial bootloader means that priority will not work, you will need to pass Perpetual Bootloader for the next update.
Port D32 is the Mini button port. Therefore, it is mainly used as an input port. When the key is pressed, the magnetic port will read high.
Port D33 is the Mini LED port. Therefore, its main role is as an output port. When it was written with high, LED lights will be lit
Package Included:1 x Mini USB STM32F103RCBT6 ARM Cortex-M3 leaflabs Leaf Maple Mini Module F Arduino
Note:The above two item just have different Chip.
STM2F103C8T6 #3
1. Chip board STM32F103C8T6
2. Board JTAG interface and reset button
3. The onboard crystal 32.768KHZ and 8MHZ
4. With 5V to 3.3V chip AMS1117-3.3
5. With a group of UART serial interfaces
6. All I/O all the leads, and mark the I/O name
7. On-board Mini USB interface, you can give the board power supply and USB communication
8. Board size 52.1 (mm) x35.5 (mm)
Package:1x ARM Cortex-M3 STM32F103C8T6 STM32 Minimum System Development Board
- Shipping
- Payment
- Return Policy
- Feedback
Shipping 1,We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
2,We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
3,we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
4,We ship items to Worldwide. Thank you!
Payment We accept PayPal payment ONLY.
If you do not have Paypal account, please registered with (http://www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders.
Return Policy
-
We are not responsible for custom duty or import tax.
-
We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if your are not satisfied with the item after receive it.
-
We could offer refund, and refund request is available only requests within a week after parcel received & returning the item as the same condition as received.
-
We offer 100% refund if the item is broken before arrival , all you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery.
-
All emails will be answered within 1 business day. If you do not receive our reply, please kindly re-sent your email,and we will reply to you as soon as possible.
-
All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by Thoroughly reviewing item description and photos, and asking all questions Prior To Bidding.
-
Please Note that size and color representation are subject to manufacturing variance and may not be exact. Also note that monitor settings may vary from computer to computer and may distort actual colors. Please read these terms thoroughly before placing your bid.
Feedback
-
We will automatically leave a positive feedback to everyone who has complete the transaction and leave us positive feedback.
-
Please do not forget to give us Five Stars on all of the Detailed Seller Ratings. Thanks!
-
In the unlikely event you are not satisfied with the transaction, please contact us before you sumbit your evaluation. We believe that everything could be solved by communication. 1.in order to provide you the best service*****,please treat the transaction fairly.*feedback is simply what we pursue. 2.Please Do contact us first to get a better solution before you would leave a *neutral or *negative feedback 3.We strive for 5-star service by stating upfront our policies, our shipping rate& our shipping frequency. if you were pleased with this transaction, please respond with all 5 stars! if you are not pleased, simply let me know via e-mial rather than leave low score, and I'll work to make it that way 4.Please email me through 'MY MESSAGES' or "Ask Seller Questions" if you have any question about our listing or your purchase