50mm REAR COIL SPRING LIFT SPACERS FOR MITSUBISHI PAJERO SHOGUN MONTERO 90-06 Quick, Easy Way To Raise Ride Height Up To 50mm

• Manufactured from high quality billet aluminium
• Quick and easy to install
• Cost-effective way of increasing the ride height of your truck by up to 50mm
• Perfect way to add clearance for larger wheels/tyres
• Straightforward to install in a few hours with basic tools and competency

Fits: Mitsubishi PAJERO EVOLUTION (V55W) 10.1990 - 11.1999 Mitsubishi PAJERO/MONTERO III (V63W, V64W, V65W, V66W, V67W, V68W, V73W, V74W, V75W, V76W, V77W, V78W) 09.1999 - 10.2006 Mitsubishi PAJERO IO (H61W, H62W, H65W, H66W, H67W, H71W, H72W, H76W, H77W, H60, 2WD, 4WD) 03.1999 - 06.2005 Mitsubishi PAJERO PININ/MONTERO IO (H66W, H67W, H76W, H77W, H60, 2WD, 4WD) 08.1999 - 02.2005

Please note We recommend suspension alignment after fitting this item to compensate for the alterations to suspension geometry Fitted pictures are included for illustration purposes only

We stock only the highest quality products so you can get the look you want for your ride without paying over the odds. When you shop with Predator4x4 there are no hidden charges - we stock and ship our expansive range of products from our UK-based warehouse with next day delivery available on most. ​​​​​​​

Need some assistance? Not a problem - our dedicated customer support team are on-hand to answer any questions you may have; and with 30 years experience between them they are always happy to help

​​​​​​​All fitting instructions / videos provided by Predator4x4 (where available - please contact us before purchasing to check, if you require instructions) are intended as guidelines only. As such an assessment should be made in terms of vehicle compatibility, safety measures etc before attempting to fit any product. Predator4x4 accepts no liability for damage or injury caused during fitting of any product supplied. Predator4x4 will not be held responsible for any errors, omissions or for the results achieved from the use of such fitting guidance howsoever supplied

Please note this item may require professional preparation and painting before being fitted to your vehicle. The supplied surface finish is not expected to be left as is when mounted to the car. We recommend the item is test fitted before painting to ensure accurate fitment for your application. Please be aware we CAN NOT ACCEPT the return of any item that has been painted.

We recommend all our parts be fitted by qualified persons to ensure correct installation and compatibility. We do not however accept any liability for the costs involved in this. In addition we shall not be held liable for labour costs incurred relating to incompatibility or product failure.

Whilst we make every effort to include OEM part numbers where possible, please note these are included as reference only. All products supplied by Predator4x4 are intended as alternatives to the equivalent OEM item(s).

We ask all our customers to check your order upon arrival. Please do not sign for any item as received in good condition if you find any sign of damage to your order. We will be happy to resolve any damaged in transit issues but we do ask that you refuse to accept the delivery if the item arrives with damage.

If for any reason you wish to return your order, please contact us within 30 days from the date you receive your order. In all cases we ask that returned items are provided back to us in an un-used state; in their original packaging.

If your item is faulty, damaged, or you have received the wrong item - please contact our customer support team, who will be happy to resolve any issues promptly

If you have purchased an item by mistake or you simply change your mind; please contact our customer support team as soon as possible. Please note such returns may be subject to a restocking fee of up to 15%

Unfortunately, we cannot be held liable for any parcels lost in the post, therefore please make sure that all returned items are sent by a recorded post and you keep your receipt as proof of postage

• Manufactured from high quality billet aluminium
• Quick and easy to install
• Cost-effective way of increasing the ride height of your truck by up to 50mm
• Perfect way to add clearance for larger wheels/tyres
• Straightforward to install in a few hours with basic tools and competency

Fits: Mitsubishi PAJERO EVOLUTION (V55W) 10.1990 - 11.1999 Mitsubishi PAJERO/MONTERO III (V63W, V64W, V65W, V66W, V67W, V68W, V73W, V74W, V75W, V76W, V77W, V78W) 09.1999 - 10.2006 Mitsubishi PAJERO IO (H61W, H62W, H65W, H66W, H67W, H71W, H72W, H76W, H77W, H60, 2WD, 4WD) 03.1999 - 06.2005 Mitsubishi PAJERO PININ/MONTERO IO (H66W, H67W, H76W, H77W, H60, 2WD, 4WD) 08.1999 - 02.2005

Please note We recommend suspension alignment after fitting this item to compensate for the alterations to suspension geometry Fitted pictures are included for illustration purposes only

We stock only the highest quality products so you can get the look you want for your ride without paying over the odds. When you shop with Predator4x4 there are no hidden charges - we stock and ship our expansive range of products from our UK-based warehouse with next day delivery available on most. ​​​​​​​

Need some assistance? Not a problem - our dedicated customer support team are on-hand to answer any questions you may have; and with 30 years experience between them they are always happy to help

​​​​​​​All fitting instructions / videos provided by Predator4x4 (where available - please contact us before purchasing to check, if you require instructions) are intended as guidelines only. As such an assessment should be made in terms of vehicle compatibility, safety measures etc before attempting to fit any product. Predator4x4 accepts no liability for damage or injury caused during fitting of any product supplied. Predator4x4 will not be held responsible for any errors, omissions or for the results achieved from the use of such fitting guidance howsoever supplied

Please note this item may require professional preparation and painting before being fitted to your vehicle. The supplied surface finish is not expected to be left as is when mounted to the car. We recommend the item is test fitted before painting to ensure accurate fitment for your application. Please be aware we CAN NOT ACCEPT the return of any item that has been painted.

We recommend all our parts be fitted by qualified persons to ensure correct installation and compatibility. We do not however accept any liability for the costs involved in this. In addition we shall not be held liable for labour costs incurred relating to incompatibility or product failure.

Whilst we make every effort to include OEM part numbers where possible, please note these are included as reference only. All products supplied by Predator4x4 are intended as alternatives to the equivalent OEM item(s).

We ask all our customers to check your order upon arrival. Please do not sign for any item as received in good condition if you find any sign of damage to your order. We will be happy to resolve any damaged in transit issues but we do ask that you refuse to accept the delivery if the item arrives with damage.

If for any reason you wish to return your order, please contact us within 30 days from the date you receive your order. In all cases we ask that returned items are provided back to us in an un-used state; in their original packaging.

If your item is faulty, damaged, or you have received the wrong item - please contact our customer support team, who will be happy to resolve any issues promptly

If you have purchased an item by mistake or you simply change your mind; please contact our customer support team as soon as possible. Please note such returns may be subject to a restocking fee of up to 15%

Unfortunately, we cannot be held liable for any parcels lost in the post, therefore please make sure that all returned items are sent by a recorded post and you keep your receipt as proof of postage

• Manufactured from high quality billet aluminium
• Quick and easy to install
• Cost-effective way of increasing the ride height of your truck by up to 50mm
• Perfect way to add clearance for larger wheels/tyres
• Straightforward to install in a few hours with basic tools and competency

Fits: Mitsubishi PAJERO EVOLUTION (V55W) 10.1990 - 11.1999 Mitsubishi PAJERO/MONTERO III (V63W, V64W, V65W, V66W, V67W, V68W, V73W, V74W, V75W, V76W, V77W, V78W) 09.1999 - 10.2006 Mitsubishi PAJERO IO (H61W, H62W, H65W, H66W, H67W, H71W, H72W, H76W, H77W, H60, 2WD, 4WD) 03.1999 - 06.2005 Mitsubishi PAJERO PININ/MONTERO IO (H66W, H67W, H76W, H77W, H60, 2WD, 4WD) 08.1999 - 02.2005

Please note We recommend suspension alignment after fitting this item to compensate for the alterations to suspension geometry Fitted pictures are included for illustration purposes only