Prinz Magnum Super Iq Dual Gauge Cine Film Projector

PRINZ MAGNON SUPER 8mm & STANDARD 8mm SILENT CINE FILM PROJECTOR - excellent condition .

YOU ARE INVITED TO BID FOR A GOOD EXAMPLE OF THE PRINZ MAGNON SUPER I.Q...SUPER 8mm, SINGLE 8mm & STANDARD 8mm AUTOMATIC SILENT CINE PROJECTOR, FULLY TESTED** WITH FILM AND HAS PROVEN TO BE IN GOOD WORKING ORDER; ALSO SUPPLIED WITH THE ORIGINAL "INSTRUCTIONS FOR USE" MANUAL AND A GOOD QUALITY 400' TAKE-UP REEL.

PLEASE SEE ALL PHOTOGRAPHS:

FULLY TESTED ** WITH BOTH SUPER 8mm & STANDARD 8mm FILMS THROUGH THIS PROJECTOR & IT WORKED VERY WELL, LOADING THROUGH THE GATE WITH THE AUTOFEED WAS VERY GOOD, GIVING A GOOD STEADY BRIGHT PICTURE FROM ITS 12v 100w LAMP:

** Fully inspected and tested by the seller, a former "Rolls Royce" trained engineer and Cinematic Enthusiast for over 50 years:

SOME OF THE SPECIFICATIONS :-

FORMAT SIZES :- Super 8mm, Single 8mm & Standard 8mm films: ( easily switchable ):

MAXIMUM REEL CAPACITY :- 120m - 400 ft:...A 400' take-up reel is supplied: 

FILM LOADING :- Autofeed of Film from Reel to Reel:

PROJECTION SPEEDS :- Variable rheostat control in forward & reverse directions + separate still frame switching:

LOOP FORMER :- Fitted with a blue useful "rocking type" loop former,to effectively deal with any picture jitter, often as a result of poor film joins or slightly damaged film sprocket holes, marked F & R (forward& reverse) in white lettering, a sharp press down if picture jitter occurs in either direction...more info. for the buyer shown in the instructions leaflet: 

FOCUS :- Round knob adjacent to the lens:

FRAMING :- Milled wheel on top face of projector:

PROJECTOR LAMP :- 12v 100w with dichroic mirror type A1/231:

FILM TRIMMER :- Yes, fixed to the rear foot (It is always important to trim the film tip for ease of film loading to all projectors):  

PROJECTION ZOOM LENS :- Bell-Ko-on F =1.2/ 15.5 -30mm Zoom..fitted with a lens cap..(Made in Japan): 

MAIN CONTROL WHEEL :- Excellent projection control switch: 

ELEVATION :- By a screwed front foot:

NOTE: THE MAIN BODY OF THIS PROJECTOR IS CONSTRUCTED FROM A GOOD QUALITY DIE - CAST METAL ALLOY, MAKING IT MUCH STRONGER THAN OTHERS OF PLASTIC CONSTRUCTION. PRINZ WERE WELL KNOWN FOR THEIR QUALITY PROJECTORS, BUILT TO LAST FOR MANY YEARS: (PLEASE SEE ALL 12 PHOTOGRAPHS)

POSTAGE COST: PLEASE NOTE THAT THE COURIER SERVICE COST SHOWN BELOW IS CALCULATED FOR "UK POST CODES ONLY"

NOTE: This projector produces a good steady picture and is a good quality machine from Prinz and as such with it's dual format & slow motion capability it could be used to produce the images for your **cine / video / DVD transfers: ** Please note that further equipment is required to enable digital transfer to DVD!

THIS PROJECTOR WILL BE PACKAGED AS FOLLOWS :-

IT WILL BE SUPPLIED LOCATED IN A STURDY BOX, WITH PLENTY OF PACKING MATERIAL, PLUS ITS SPECIAL MAINS LEAD WHICH IS FITTED WITH A MODERN DAY SLEEVED SAFETY PLUG (protected by a 3amp fuse), A SUPER 8mm REEL ADAPTOR, THE ORIGINAL "INSTRUCTIONS FOR USE" LEAFLET, PLUS A GOOD QUALITY 400' TAKE-UP REEL: (PLEASE SEE ALL PHOTOGRAPHS)

PLEASE NOTE: The front reel with test film shown in some of the photographs is not included:

MADE IN JAPAN (This is a genuine Prinz manufactured cine projector...Serial # 134196)

THANKS FOR YOUR INTEREST!