Plasma Cutter With Hf Tig/Mma 3 In 1 Or With Mma 2 In 1 Dc Inverter Welder +Kits Reliable Quality~Digital Control~Multifunction~VAT Inv.

EUR 519,97 Buy It Now 15d 14h, EUR 23,16 Shipping, 30-Day Returns, Pay with PayPal and you're fully protected.

Seller: Top-Rated Seller wlqy6688 (2.554) 100%, Location: london, London, Ships to: EuropeanUnion, Item: 263977163918 (1). MODEL: CUT-45D CUTTER/MMA 2 IN 145AMP AIR PLASMA CUTTER/MMA 2 IN 1 DC IGBT INVERTER WELDER MACHINE FEATURES This is a quality multipurpose welder which comes with complete accessories so it is perfect for garage, farm, mobile technicians, DIY and other repair services. 45 amp powerful plasma cutter mode can cut all conductive metals such as aluminium, stainless steel, copper, brass, titanium and so on. 250amp powerful MMA/ARC/STICK welding mode can be suitable for electrode size 1.6-4.0mm. PLASMA CUTTER & MMA/ARC/STICK welder 2 IN 1Digital Control Panel Design enables more accurate and easier operatingHF touched Arc-starting enables easier starting of cutAuto hot-start, ARC Force and Anti-stick technology for MMA weldingCutting thickness: Clean cut 12mm, Severance cut 15mm on mild steelUsable Electrode 1.6 - 4.0mm for MMA weldingIGBT technology inverter - more efficient and easier to use than a transformerLED amperage displayCE approvedCompact portable design and light weightSuitable for cutting mild steel, stainless steel, copper, brass and aluminium etc.SPECIFICATIONS Specification CUT MMA Power Voltage (V) AC220V+/-15% Single phaseRated Input Capacity (KVA) 7 8.2No-load Voltage (V) 200 68Current Range (A) 20-45 20-250Rated Output Voltage (V) 96 30Rated Duty Cycle (%) 60Efficiency (%) 85Insulation Class FProtection Class IP21Weight (kg) 8Measurements (mm) 375 x 155 x 300 ANDELI CUT-45D PLASMA CUTTER/MMA 2 IN 1 DC inverter Welder, 4M Torch, Earth Lead, MMA Lead, Instruction manual, Air filter regulator and Torch Consumables Kit etc. THIS WELDER DOES NOT COME WITH A PLUG12 Months UK Warranty for this item*************************************************************************************** (2). MODEL: CT-520D CUTTER/TIG/MMA 3 IN 150A PLASMA CUTTER & 200A HF TIG & MMA/ARC/STICK DC INVERTER WELDER 3 IN 1 DC IGBT INVERTER WELDER DESCRIPTION Free Next Working Day Delivery to mainland of UKIf you order and pay before 2:00pm we dispatch your item in same dayMACHINE FEATURESThis is a quality multipurpose welder which comes with almost complete accessories so it is a perfect equipment for garage, farm, mobile technicians, DIY and other repair services. 50amp powerful plasma cutter mode can cut all conductive metals such as aluminium, stainless steel, copper, brass, titanium and so on. 200amp powerful DC TIG welding mode can be suitable for welding the metals such as steel, stainless steel, nickel alloys, copper, brass, bronze and so on except aluminium and aluminium alloys. 200amp powerful MMA/ARC/STICK welding mode can be suitable for electrode size 1.6-4.0mm. PLASMA CUT & TIG & MMA/ARC/STICK DC Inverter welder 3 IN 1Digital Control Panel Design enables more accurate and easier operatingIGBT technology inverter- Latest transistor technology more efficient so enable highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBTSmooth arc and stable welding performancePlasma cutter function for cutting all conductive metals such as aluminium, stainless steel, copper, brass, titanium and so onDC TIG function for welding stainless steel, carbon steel, copper and non-ferrous metals except aluminium and aluminium alloysMMA / Stick electrode welding– is a universal welding process. No protective gas is needed and can therefore be used flexibly anywhere. HF (high-frequency) touched Arc-starting (contact ignition) enables easier starting of cutCutting thickness: Clean cut is up to 12mm, Severance cut is up to 15mm on mild steel TIG welding with HF (high-frequency) ARC Start - Easy ARC starting by non-contact ignition, improves tungsten life and ensures a much better welding resultUP-Slope and DOWN-Slope can be adjusted in range 0-5S on TIG Welding then prevents voids to improve the welding quality at the start and end of the welding. 2T, 4T MODES are available (determines the control of the operating mode and provides extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode the arc is ignited after a single press and release of the button. After pressing and releasing again, the ignition is stopped.) Comes with a 4m CUT torch and a 4m TIG torchAuto hot-start, ARC Force and Anti-stick technology in MMA weldingUsable electrode 1.6 - 4.0mm for MMA weldingLED digital displaysCE approvedCompact portable design and light weight SPECIFICATIONSMODE CUT TIG MMAPower Input Voltage (V) AC220V+/-15% Single phase Frequency(Hz) 50/60Power Factor 0.93 Input Capacity (KVA) 7 5 7No-load Voltage (V) 210 64 64Current Range (A) 20-50 5-200 20-180Rated Output Voltage(V) 100 18 27.2Rated Duty Cycle (%) 40 No-load Loss(W) 100 Efficiency (%) 70Insulation Class FProtection Class IP214T / 2T Mode Options Yes Yes /ARC Start Method HF Contact HF ScratchGas Delay Time (S) 0-10 0-10 /Up Slope Time (S) / 0-5 / Down Slope Time (S) / 0-5 / ARC Force / / YesHot Start / / YesWelding or Cutting Thickness 0-16mm 0.8-12mm 2-12mm Welding Electrode Size / / 1.6-4.0mmWeight (kg) 14Measurements (mm) 456 x 177 x 354 CT-520T PLASMA CUTTER/TIG/MMA 3 IN 1 DC inverter Welder, 4M CUTTER Torch, Air filter regulator, 4M TIG Torch, Earth Lead, MMA Lead, Steel hammer/brush, Face mask, Instruction manual and Torch Consumables Kit etc. THIS WELDER DOES NOT COME WITH A PLUG12 Months UK Warranty for this item LOOKING FOR OTHER SIZE OR DIFFERENT TYPE OF INVERTER WELDERPLEASE CLICK HERE YQX ELECTRONICS TO VISIT MY EBAY SHOP PAYMENTPAYPAL (No Extra Charge). Bank Transfer, Personal Cheque and Postal Order (UK Buyers ONLY). Please be aware it takes 5 working days at least to clear the balance for personal cheque. We ONLY accept PAYPAL for international buyer. All payments must be received within seven days after the auction end. SHIPPINGGoods will ONLY be shipped once full payment (inc. P&P cost) is received and cleared. In the majority of cases goods are dispatched within 24 hours (Mon-Fri). Buyers are responsible for paying the custom duty if located outside UK. TERMS OF SALEIf buyer wants to return the item(s) for a refund the buyer must contact us within 30 days of receipt. All returns must include all original items without any damages, in re-saleable condition as new, whole original packaging. Buyer must be responsible for the return postage. CONTACT USThe winner will receive an "eBay End of Auction" email. Buyers will receive a confirmation email once the item(s) has been dispatched. Contacting us with email at any time. We try to answer all the emails within 24 hours after receiving. Condition: New, MPN: CT-520D/CUT-45D, Brand: ANDELI

PicClick Insights PicClick Exclusive
  •  Popularity - 25.240 views, 66.2 views per day, 381 days on eBay. Super high amount of views. 52 sold, 18 available.
  •  Price -
  •  Seller - 2.554+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items