We all have OTTO CHEMISTRY Products in the range.
OTTOSEAL® P 305 The premium PU sealant for connection joints 1K polyurethane sealant For indoor and outdoor Bubble-free curing Weather resistant Long-lasting and robust joint Silicone free Product details The premium PU sealant for connection joints OTTOSEAL® P 305 is ideal for various expansion and connection joints indoors and outdoors. Thanks to its bubble-free curing and ability to be painted over, OTTOSEAL® P 305 is a perfect choice for long-lasting, visually demanding joints. Characteristics Silicone free Paint compatible according to din 52452 No interactions with existing and adjacent coatings Can be painted over / can be painted over - please note the application instructions in the technical data sheet Visual adjustments and protective coating possible Good weather and aging resistance For long-lasting indoor and outdoor applications Cures without bubbles Suitable for visually demanding joints Tensile stress value at 100% (ISO 37, S3A): 0.3 N/mm² application areas External wall joints according to din 18540-F Expansion and connection joints on prefabricated concrete and aerated concrete parts Sealing of facades, metal constructions, window and door connections, flat roof parapets Standards and tests Tested according to EN 15651 - Part 1: F EXT-INT CC 25 LM Tested and externally monitored according to din 18540-F (South German Plastics Center, Würzburg) For applications according to IVD data sheet no. 7+9+12+20+22+24+27+29+31+32+35 suitable Seal of quality from the IVD - Industrial Association for Sealants eV - tested by the ift - Institute for Window Technology eV, Rosenheim Conforms to Regulation (EC) No. 1907/2006 (REACH) French VOC emission class A+ EMICODE® EC 1 Plus - very low emissions Tested fire behavior according to EN 13501: Class E For classification according to building certification systems, see sustainability data sheet For technical reasons, the colors shown may differ from the original colors of the products. Colors concrete gray light gray medium gray mortar gray black white Delivery form: 1 aluminum foil bag 600 ml each Safety notice: Keep out of reach of children. Always read the label and product information before use.
· Classification of the substance or mixture · Classification according to Regulation (EC) No. 1272/2008 GHS07 Skin Sens. 1 H317 May cause an allergic skin reaction. · Identification elements · Labeling according to Regulation (EC) No. 1272/2008 The product is classified and labeled according to the CLP regulation. · Hazard pictograms GHS07 · Signal word Danger · Hazardous components for labeling: Pentamethylpiperidyl sebazate Hardener LI (Isophoronedialdimine) · Hazard warnings H317 can cause allergic reactions to your skin. · Safety instructions P102 Keep out of reach of children. P271 Use only outdoors or in well-ventilated areas. P280 Wear protective gloves/eye protection. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P304+P312 IF INHALED: Call a POISON CENTER/doctor if you feel unwell. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes wash. If possible, remove any contact lenses. Further wash. Get medical advice/attention. · Additional information: Contains isocyanates. Can cause allergic reactions. Contains epoxy-containing compounds. Can cause allergic reactions. · Other dangers Note according to Annex XVII.56 REACH: People who are already sensitized to diisocyanates may not be able to handle this product trigger allergic reactions. Contact with asthma, eczematous skin diseases or skin problems, including Avoid skin contact with the product. Do not use the product if there is insufficient ventilation or wear a protective mask with an appropriate one Wear a gas filter (type A1 according to EN 14387). · Results of the PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable.
Marke | OTTO-CHEMIE |
Volumen | 600 ml |
Material | 1K-Polyurethan-Dichtstoff |
Maßeinheit | L |
Besonderheiten | Für innen und außen |
Besonderheiten | Blasenfreie Aushärtung |
Besonderheiten | Witterungsbeständig |
Besonderheiten | Langlebige und robuste Fuge |
Besonderheiten | Silikonfrei |
Herstellernummer | P305-19 |
Geeignet für | Außenwandfugen nach DIN 18540-F |
Geeignet für | Dehnungs- und Anschlussfugen |
Geeignet für | Abdichten von Fassaden |
Herstellungsland und -region | Deutschland |
Anzahl der Einheiten | 0,600 |
Produktart | Premium-PU-Dichtstoff für Anschlussfugen |