/7
Description
Specification
Content
Service
VAT
Terms & Conditions
ENGMATE™ 3 Axis Kit for CNC DIY
1*5 Axis Breakout Board +3*EMA2-040D15 Microstep Motor Drivers + 3*EMA162-3805S4 Nema 16 40oz-in (2.9kg.cm) Stepper Motors + 1*24V 10A Switching Power Supply
The upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller. The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger. With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via the MACH3, KCAM4, etc. parallel-control CNC software.
The stepper driver board controller in kit is a high performance microstepping driver adopting of bipolar constant-current chopper technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.
In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. Please purchase this kit with confidence.
5 Axis Breakout Board
- • High performance, cost-effective
- • Maximum support 5-axis stepper motor driver controllers
- • Compatible with MACH3 etc. parallel-control CNC software
- • Compatible with all the 2 phase microstep drivers in the market
- • USB power supply and peripherals powered phase are separated to protect computer security
- • All the signals are opto-isolated which can protect your computer security
- • Output 0-10V analog voltage for inverter to control the spindle speed
- • Relay output control interface , accessed by the spindle motor or the air pump, water pump, etc.
- • 5 Types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
- • Shape Pulse and direction signals. Data transfer speeds of up to 10MBit/S
- • Amplification, filtering, enhancement processing drivers enable signal
Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board.
Hybrid Microstepping Driver (EMA2-040D15 )
|
|
- • Supply voltage from 18-40V DC
- • Output current programmable, with 7 stalls output current setting , from 0.21-1.5A(Peak)
- • Adoption of bipolar constant-current chopper technology
- • Low-noise, low-vibration and low temperature rising.
- • Microstep resolutions programmable, with 7 stalls microstep subdivision setting
- • Automatic Half Current, motor wires miconnected protection
- • Internal optical isolation, pulse input frequency up to 100KHz
- • Support PUL/DIR mode
- • Suitable for 2-phase and 4-phase Hybrid stepper motors
|
Hybrid Stepper Motor (EMA162-3805S4 )
- • High torque, more smooth movement
- • High efficiency, energy-saving, low noise and low vibration
- • High start torque, low start current and reliable performance
- • Simple 4 wires ensure easier wiring, installation and maintenance
|
|
24V 10A Switching Power Supply
|
|
- • High efficiency, high reliability, low cost
- • ±10% output voltage adjustable
- • PWM control and regulation, insure the steady and precise output voltage
- • Over-temperature protection: built-in a powerful fan for cooling. RTH3≥45°C, fan on. RTH3≥85°C, output shutdown
- • Built-in EMI filter
- • 100% full load burn-in test
- • Over current, over voltage, short circuit
- • Low output ripple and yawp
|
Common-anode Connection
Applications
Suitable for a variety of small sized automation equipment and instruments.
- • For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc..
- • For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc..
Matching Stepper Motors
| Model NO.
| Min Motor Size
| Max Motor Size
| Recommended Supply Voltage
| Recommended ENGMATE Stepper Motors
|
| EMA2-040D15
| NEMA 8
| NEMA 17
| 24V DC
| EMA112-4506S4, EMA162-3805S4
|
| EMA2-040D22
| NEMA 8
| NEMA 17
| 24V DC
| EMA082-4208S4, EMA142-4520S4
|
| EMA2-050D42
| NEMA 17
| NEMA 23
| 24V/36V DC
| EMA172-6015S4, EMA232-5615S4
|
| EMA2-050D56
| NEMA 23
| NEMA 34
| 36V DC
| EMA232-7630S4, EMA232-11235S4
|
| EMA2-070D56
| NEMA 23
| NEMA 34
| 48V DC
| EMA242-8840S4, EMA342-7842S4
|
| EMA2-080D72
| NEMA 23
| NEMA 34
| 60V DC
| EMA342-10050S4, EMA342-15662S4
|
| EMA2-080A72
| NEMA 34
| NEMA 42
| 80V DC
| EMA422-15065S4
|
| EMA2-220A80
| NEMA 34
| NEMA 52
| 110V/220V AC
| EMA422-20180S4
|
|
|
| Electrical Properties of 5 Axis Breakout Board(ambient temperature Tj = 25°C)
|
| Input Voltage
| Get power from PC via USB port and 12-24V power supply for limit/Estop switch
|
|
| Drive Type
| Pulse and Direction Signal Control(EMA2-040D15/EMA2-040D22)
|
| Suitable Microstep Driver
| 2 Phase Microstep Driver
|
| Net Weight
| Approx 75g
|
| Dimension
| 90*70*20mm (L*W*H)
|
| Technique Parameter for EMA2-040D15 Stepper Driver Hybrid Stepper Motor
|
| Model NO.
| EMA2-040D15
|
|
| Input Voltage
| 18-40V DC
|
| Output Current
| 0.21-1.5A(Peak)
|
| Pulse Input Frequency
| 100KHz
|
| Cooling Method
| Natural Cooling or Fan Forced cooling
|
| Environment
| Avoid dust, oil fog, corrosive gas
|
| Ambient Temperature
| 0°C~50°C (32°F~122°F)
|
| Operating Temperature
| 70°C (158°F) Max
|
| Storage Temperature
| -20°C~65°C (-4°F~149°F)
|
| Humidity
| 40%RH-90%RH
|
| Dimension(WxHxD)
| 86×55×20mm
|
| Weight
| 130g
|
| Suitable Motor
| Nema 8, Nema 11, Nema 14, Nema 16, Nema 17
|
| EMA162-3805S4 Nema16 Stepper Motor
|
| Model NO.
| EMA162-3805S4
|
|
| Motor Type
| 2-Phase
|
| Step Angle (°)
| 1.8
|
| Rated Voltage (V)
| 12
|
| Rated Current (A)
| 0.5
|
| Phase Resistance (Ω)
| 24
|
| Phase Inductance (mH)
| 45
|
| Holding Torque (kg.cm/oz-in)
| 2.9/40
|
| Rotor Inertia (g.cm²)
| 24
|
| Motor Length (mm/in.)
| 38/1.5
|
| Frame Size (mm/in.)
| 39/1.54
|
| Lead No.
| 4
|
| Shaft
| Single
|
| Motor Weight (g)
| 250
|
| 250W 24V 10A Switching Power Supply 110/220V Switchable Temperature Control
|
| Output Voltage
| 24V
|
|
| Output Voltage Tolerance
| ±1%
|
| Rated Output Current
| 10A
|
| Output Current Range
| 0-10A
|
| Output Voltage Adjustment Range
| ±10%
|
| Output Power
| 250W
|
| Input Voltage Range
| 110VAC/220VAC±20%(selected by switch)
|
| Input Frequency
| 47~63Hz
|
| Input Current
| 10A/115VAC，5.0A/230VAC
|
| Efficiency
| 85%
|
| Inrush Current
| 25A/115VAC, 50A/230VAC
|
| Leakage Current
| <3.5mA/240VAC
|
| Over Load Protection
| 115%~135% hiccup mode, auto-recovery
|
| Over-voltage Protection
| 30.6~33.2V hiccup mode, auto-recovery
|
| Over-temperature Protection
| RTH3≥45°C, fan on. RTH3≥85°C, output shutdown
|
| Working Temperature and Humidity
| -10°C~ 60°C, 20%~90%RH
|
| Storage Temperature and Humidity
| -20°C~ 85°C, 10%~95%RH
|
| Antiknock Characteristic
| 10-500Hz, 2G, 10min./period, duration 60mins
|
| Withstand Voltage
| I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC
|
| Insulation Resistance
| 100M ohms/500VDC
|
| Safety Standards
| UL1012
|
| EMC Standards
| EN55022, Class A
|
| Weight
| 820g
|
{{{TBR_ITEM_Service}}}
UK Business Customer
Purchasing goods for your own business and realize that a VAT invoice is a must for claiming back input tax to finally reduce cost? Or ordering for use of your employer and find out the Accounting Department always require a VAT invoice for reimbursement?
No more hassle. Just contact us for a FULL VAT INVOICE within 30 days of payment. Invoice will be provided in electronic format.
UK Individual Customer (non-VAT registered)
Invoice is also available upon request. Invoice will be billed to shipping address unless otherwise instructed.
| Estimated Delivery Time
|
| Country/Region
| Standard (Business Days)
| Express (Business Days)
| Attentions
|
| UK
| 2-4
| 1-2
|
|
| Your order will be dispatched within 1 working day after cleared payment while stock lasts.
|
|
| Shipment notification is available via eBay message or email once order is dispatched.
|
|
| The stated delivery time is not guaranteed since it depends on logistics' performance. However, 95% parcels will be delivered within the reference time. Please contact us if there is delivery delay.
|
|
| Other Western Europe Countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland
| 3-7
| 2-4
|
| Other Countries & Districts (May depart from other stock location)
| 15-25
| varying
|
|
Notes for EU customers
- Under new EU VAT rule, all goods sold to EU are subject to local VAT.
- Beginning July 1, 2021, eBay will collect VAT on certain orders shipped to EU addresses on behalf of customers' local tax authorities. If VAT is shown during checkout, you can simply wait for the package to arrive after payment.
- eBay does not collect VAT at checkout for orders over a certain value, buyers must declare and pay the taxes upon importation. Delivery couriers will usually contact you once package arrives in your country and provide instruction for customs clearance. Please contact us if you need any assistance.
|
| Estimated Delivery Time
|
| Country/Region
| Service
| Estimated Delivery (Business Days)
| Remarks
|
| USA (excl. Alaska, Hawaii, Puerto Rico)
| USPS First-Class Package /UPS SurePost/UPS Ground
| 3-7
|
|
| Your order will be dispatched within 1 working day after cleared payment while stock lasts.
|
|
| Shipment notification is available via eBay message or email once order is dispatched.
|
|
| The stated delivery time is not guaranteed since it depends on logistics' performance. However, 95% parcels will be delivered within the reference time. Please contact us if there is delivery delay.
|
|
| Other Countries (May depart from other stock location)
| International Airmail Service
| 12-21
|
| Estimated Delivery Time
|
| Country/Region
| Service
| Estimated Delivery (Business Days)
| Remarks
|
| Australia (NSW)
| Australia Post
| 2-3
|
|
| Your order will be dispatched within 1 working day after cleared payment while stock lasts.
|
|
| Shipment notification is available via eBay message or email once order is dispatched.
|
|
| The stated delivery time is not guaranteed since it depends on logistics' performance. However, 95% parcels will be delivered within the reference time. Please contact us if there is delivery delay.
|
|
| Australia (VIC,SA,QLD,NT)
| Australia Post
| 4-6
|
| Australia (WA,TAS)
| Australia Post
| 6-8
|
| New Zealand
| Australia Post
| 6-9
|
| Other Countries (May depart from other stock location)
| International Airmail Service
| 12-21
|
| Geschätzte Lieferzeit
|
| Land/Region
| Bedienung
| Geschätzte Lieferzeit (Werktage)
| Bemerkungen
|
| Deutschland
| Deutsche Post, DHL oder Hermens
| 2-4
|
|
| Wenn Sie die besondere Anforderung haben, kontaktieren Sie und bestätigen Sie bitte mit uns vor Bestellung. z.B.
|
|
| Anforderung, die Ware dringend bekommen.
|
|
| Anforderung, dass die Ware aus einem bestimmten Ort geliefert werden.
|
|
| Anforderung, dass die Ware innerhalb einer bestimmten Zeit geliefert werden.
|
|
| Für weitere Fragen/Anforderung über die Lieferung.
|
|
| EU-Länder
| Deutsche Post, DHL oder Hermens
| 3-8
|
| Andere Länder (Vielleicht Schiff aus anderen Lagerort)
| Unterschiedlich
| Unterschiedlich
|
- Ihre bestellte Ware wird am nächsten Werktag nach dem vollständigen Bezahlung verschickt liefern, wenn die Ware vorrätig ist.
- Die Benachrichtigung wird gesendet, nachdem Ihre Bestellung versandt wird. Überprüfen Sie bitte bei Ihrer E-Mail oder eBay die Nachricht für das Versanddatum.
- Alle Pakete werden per Luftpost versendet. Es ist nicht garantiert, dass alle Pakete innerhalb der oben genannten Lieferzeit ankommen. Allerdings werden 95% Pakete innerhalb der Referenzzeit geliefert.
- Es ist unmöglich, die Sendung der Luftpost im Internet zu verfolgen. Wir helfen Ihnen, wenn Sie das Problem mit der Sendungsverfolgung haben.
|
|
|
|
|
|
|
| Money Back
| Warranty
| Replacement
|
| We accept return & refund if you are not satisfied with our product within 30 days.
| We provide 1 year warranty from date of purchase and offer satifying solutions upon your warranty issue.
| We accept free replacement if you receive a not-as-described(defective, incorrect, parts missing) product.
|
68 watchers
29 watchers
4 watchers