Seller:alice1101983✉️(568,993)99.4%,
Location:ShenZhen, CN,
Ships to: WORLDWIDE,
Item:401447548021MINI D1 Wemos ESP-32S ESP32 WIFI + Bluetooth ESP8266 CP2104 Module.
Home
Category 1
Category 2
About Us
MINI D1 Wemos ESP-32S ESP32 WIFI + Bluetooth ESP8266 CP2104 Module
Wemos MINI D1 ESP32
Wemos MINI D1 ESP32 ESP-32S WIFI + Bluetooth ESP8266 Module CP2104 For Arduino
Shipping list: 1. Lange weibliche pins x4pcs 2.kurze weibliche pinsx4pcs 3.Normal pinsx4pcs 4. mini D1 ESP32 blue x1pcs
ESP32S
Description:
ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, clocks & Times, abundant peripheral Interfaces and sercurity mechanism.
ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video steaming for camera, Wi-Fi & Bluetooth enabled devices, Home automation and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides.
ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles.
ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.
ESP32 is designed for mobile, wearable electronics, and Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.
Key Features:
CPU and Memory: Xtensa® 32-bit LX6 Dua-core processor, up to 600 DMIPS. 448 KByte ROM 520 KByte SRAM 16 KByte SRAM in RTC. QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes. Supply Voltage: 2.2V~3.6V
WIFI 802.11 b/g/n/e/i 802.11 n (2.4 GHz), up to 150 Mbps 802.11 e: QoS for wireless multimedia technology. WMM-PS, UAPSD MPDU and A-MSDU aggregation Block ACK Fragmentation and defragmentation Automatic Beacon monitoring/scanning 802.11 i security features: pre-authentication and TSN Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS) Infrastructure BSS Station mode/SoftAP mode Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management UMA compliant and certified Antenna diversity and selection
Bluetooth: Compliant with Bluetooth v4.2 BR/EDR and BLE specification Class-1, class-2 and class-3 transmitter without external power amplifier Enhanced power control +10 dBm transmitting power NZIF receiver with -98 dBm sensitivity Adaptive Frequency Hopping (AFH) Standard HCI based on SDIO/SPI/UART High speed UART HCI, up to 4 Mbps BT 4.2 controller and host stack Service Discover Protocol (SDP) Security Manage Protocol (SMP) Bluetooth Low Energy (BLE) ATT/GATT HID All GATT-based profile supported SPP-Like GATT-based profile BLE Beacon A2DP/AVRCP/SPP, HSP/HFP, RFCOMM CVSD and SBC for audio codec Bluetooth Piconet and Scatternet
Clocks and timer Internal 8 MHz oscillator with calibration Internal RC oscillator with calibration External 2 MHz to 40 MHz crystal oscillator External 32 kHz crystal oscillator for RTC with calibration Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group RTC watchdog
Peripheral interface: 12-bit SAR ADC up to 18 channels 2 × 8-bit D/A converters 10 × touch sensors Temperature sensor 4 × SPI, 2 × I2S, 2 × I2C, 3 × UART 1 host (SD/eMMC/SDIO), 1 slave (SDIO/SPI) Ethernet MAC interface with dedicated DMA and IEEE 1588 suppor CAN 2.0 IR (TX/RX) Motor PWM, LED PWM up to 16 channels Hall sensor Ultra low power analog pre-amplifier
Security: IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI Secure boot Flash encryption 1024-bit OTP, up to 768-bit for customers Cryptographic hardware acceleration: -AES-HASH(SHA-2) library-RSA-ECC-Random Number Generator (RNG)
Development support: SDK Firmware for fast on-line programming Open source toolchains based on GCC
Application: Generic low power IoT sensor hub Generic low power IoT loggers Video streaming from camera Over The Top (OTT) devices Music players - Internet music players - Audio streaming devices Wi-Fi enabled toys - Loggers - Proximity sensing toys Wi-Fi enabled speech recognition devices Audio headsets Smart power plugs Home automation Mesh network
Size: The size of ESP-32S Wifi module is 16mm x 24mm x 3mm. The ESP-32S deploys 4MB SPI Flash with WSOP-8 package. It also uses 3DBi PCB antenna on board.
Packing list:
1x ESP-32S Wifi Bluetooth Combo Module
Payment
Shipping
Refund
Payment
We accept PayPal only. But we only Accept your Ebay Address ,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to wait 30 days (US only n eed 7-10 days) ,Please take care it.Less than 30 days,we can't take a refund.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Condition:New
select:TTGO Wemos MINI D1 ESP32
Brand:Unbranded
PicClick Insights - MINI D1 Wemos ESP-32S ESP32 WIFI + Bluetooth ESP8266 CP2104 Module PicClick Exclusive
Popularity - 9 watchers, 0.0 new watchers per day, 2,317 days for sale on eBay. Super high amount watching. 163 sold, 10 available.
Popularity - MINI D1 Wemos ESP-32S ESP32 WIFI + Bluetooth ESP8266 CP2104 Module
9 watchers, 0.0 new watchers per day, 2,317 days for sale on eBay. Super high amount watching. 163 sold, 10 available.
Best Price -
Price - MINI D1 Wemos ESP-32S ESP32 WIFI + Bluetooth ESP8266 CP2104 Module
Seller - 568,993+ items sold. 0.6% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Seller - MINI D1 Wemos ESP-32S ESP32 WIFI + Bluetooth ESP8266 CP2104 Module
568,993+ items sold. 0.6% negative feedback. Great seller with very good positive feedback and over 50 ratings.