This is the MASTER listing of all Ballast models currently offer by BAY HYDRO & PAR-TEK LIGHTING, More to come !! We have Just added the PAR-TEK Lighting Twin 600W Ballast as we are sold out of the Bay Hydro, Same great product, Full Color Boxes.
Contact us for any bulk & Wholesale needs also.
Brand New BAY HYDRO & PAR-TEK LIGHTING Digital Ballast Line
PAR - TEK Lighting Ballasts are made from the highest quality material & workmanship in the industry. PAR - TEK Ballasts are manufactured in a technologically advanced factory having strict quality control with less then 2% failure rate. It is highly recommended to use PAR - TEK Grow Lamps for an inferior lighting setup as they have been fine tuned to operate with our digital ballast. PAR - TEK Ballasts are designed with internal microprocessors that will soft start lamps and intelligently detect the lamp voltage & line current to prolong ballast & bulb life hours. PAR - TEK Ballasts are available in multi-wattage or dimmable design platforms, which will save power at both input & output. PAR - TEK Ballasts will intelligently stagger lamp ignition when grouped together to avoid in-rush current overload. PAR - TEK Ballasts come equipped with perfect "Self-Protection Mechanism" to prolong ballast life. All PAR - TEK LIGHTING Ballasts come with a complete 3 year warranty.
Upgrade to the all new BAY HYDRO OR PAR-TEK LIGHTING Digital Ballast line. You will see the benefits instantly! We have located a team of EXPERT engineers to create a BETTER QUALITY and more reliable Digital Ballast Line, including our High Frequency DE Ballasts (Operating @ >106KHz). We had talked with MANY factories and have chosen the more superior, we did NOT go to the cheapest factory we could find like many other ballast you see on the market today. We take great pride in our company and the customers we serve. BAY HYDRO will be here to take care of you if a problem is to arise for year to come. Our ballasts come with a 3 year warranty and have less than 2% defect rate. We stand behind our product 100%. Bay Hydro has been a trusted brand for many years and we will continue to provide the best quality products on the market along with our superior customer service. We have 1000w & 600w HPS & MH Lamps / Bulbs to pair with our ballast for optimal performance. It is best to use our bulbs with our ballast as they are made for each other.
You will see increased efficiency & increased lumen output right from the start. Compared to traditional magnetic ballasts, Bay Hydro Digital Ballasts deliver approximately 30% more light for your garden. More Light = BIGGER Yield, you will provide light at a far more stable level with NO flicker or noise, Lamps will start up faster, and operate silently. These incredibly light-weight ballasts also produce less heat and they do not have nor need a fan (one less thing to break) as they are made with high quality parts.
BAY HYDRO & PAR-TEK LIGHTING Digital ballast are a performance leader.
Why Digital Ballasts?
More Lumen Output - Up to 30% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard.
Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
Fast Start-up - It reaches full brightness in under one minute (Depending on bulb used); magnetic ballasts typically take about twenty minutes.
Completely Silent - No noise or vibration of any kind
Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
Our ballasts are designed with internal microprocessor to soft start lamp and intelligently detect lamp voltage, current to prolong life hours. Dimmable & Multi-Wattage features can save power at both input & output side. Staggered ignition to be more efficient to avoid inrush current. Perfect self-protection mechanism to prolong life. 3 years warranty. YOU MUST KEEP YOUR RECEIPT AS THAT SHOWS DATE OF PURCHASE FOR WARRANTY COVERAGE. Please SAVE your receipt.
ALL BALLAST ARE EQUIPPED WITH THE FOLLOWING:
Staggered Ignition | ||||||
When grouping ballasts, they will separately and randomly ignite lamps within 0~7 seconds to reduce in-rush current. | ||||||
Self-Protection Mechanism | ||||||
Input Protection | high/low voltage; lightening strike/ inrush current/ pulse group; over current; brownout; | |||||
Output Protection | open circuit; short circuit; end of lamp life; failure ignition; over voltage; rectifying effect protection | |||||
Overheat protection | In operation, inner heats will dissipate through case. When case temperature rise up to 85?, ballast will gradually reduce power to 80%; When case temperature reach to 90?, ballast will stop working until cool down to 70?, then returns to full power status. |
1000w SE / DE Ballast Parameters | ||||||
Model: BH1000WSEDE | Power Factor: >0.99 | |||||
Lamp: 1000W Double Ended HPS & MH Lamp | Input Voltage Range: 95-264V | |||||
1000W HPS & MH Standard Lamp | Operating Frequency: >106kHz | |||||
Input Power: 1081W | Ambient Temperature: -25 to 40 C (-13 to 104 F) | |||||
Input Voltage: 120V or 240V, 50/60Hz | Enclosure Temperature rise: 35 C (95 F) | |||||
Input Current: 9.10A·120V;4.43A·240V | Environment IP Require: >IP23 | |||||
THD:< 8% | Unit Weight: 5.5kg | |||||
Lamp CCF:< 1.7 | Unit Dimension: 14.17 x 6.77 x 3.96 inch |
600w Ballast Parameters | ||||||
Model: BH600WDB | Power Factor: >0.99 | |||||
Lamp: 600W HPS or MH Lamp | Input Voltage Range: 95-264V | |||||
400W HPS or MH Lamp | Operating Frequency: >60kHz | |||||
Input Power: 660W | Ambient Temperature: -25 to 40 C (-13 to 104 F) | |||||
Input Voltage: 120V or 240V, 50/60Hz | Enclosure Temperature rise: 35 C (95 F) | |||||
Input Current: 5.57A·120V;2.68A·240V | Environment IP Require: >IP23 | |||||
THD:< 8% | Unit Weight: 4.5kg | |||||
Lamp CCF:< 1.7 | Unit Dimension:13.18 x 5.9 x 3.42 inch |
600w Twin / Dual Ballast Parameters | ||||||
Model: BH600TWIN | Power Factor: >0.99 | |||||
Lamp: 600W HPS or MH Lamp | Input Voltage Range: 175-264V | |||||
400W HPS or MH Lamp | Operating Frequency: >60kHz | |||||
Input Power: 650W X 2 = 1300w Total | Ambient Temperature: -25 to 40 C (-13 to 104 F) | |||||
Input Voltage: 240V, 50/60Hz | Enclosure Temperature rise: 35 C (95 F) | |||||
Input Current: 2.68A Each Lamp @ 240V | Environment IP Require: >IP23 | |||||
THD:< 8% | Unit Weight: 5.5KG | |||||
Lamp CCF:< 1.7 | Unit Dimension: 21.5 x 4.48 x 3.18 inch |
Thank you for shopping with Bay Hydro!
eBay Store News Letter