M10, Throughbolts, A4/ 316 Stainless Steel, Heavy Duty Masonry, Concrete Anchor.. M10, Throughbolts, A4/ 316 Stainless Steel, Heavy Duty Masonry, Concrete Anchor.
M10, ETA Approved Option 7, Throughbolts, A4/ 316 Stainless Steel, Heavy Duty Masonry, Concrete Anchor Fixaball sells all lengths of M10 though/ rag bolts, in A4/ 316 Stainless Steel. Stainless Steel Grade A4/ 316 Throughbolt Masonry AnchorThroughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. The Stainless Steel Throughbolt is grade A4/316. It is the ultimate "through fixing" with the hole diameter as the bolt diameter. It is ideal for bolting in place awkward fixtures without the need for marking out, removal and repositioning. It is a torque controlled anchor suitable for use in concrete over C20/25 strength. A4/ 316 Stainless Steel A4 Grade Steel is also known as 316 and so, both are included in the description. This is the marine grade, stainless steel that can resist heavy weathering and chemical attack. It's application is used where the fixing will be prone to constant water, air and chemical exposure (eg. salt). A4/ 316 has a similar tensile strength to 8.8 high tensile steel. Advantages of a Through Bolt High Performance, cost effective anchor for non-cracked substrates eg. concrete Suitable for reduced embedment to avoid contact with rebars/ reinforcement cages. Holes are the same diameter as the fixings so the fixing can be passed through the fixture after locating it in the right position. Cold formed body provides consistent dimensional accuracy and material stability. High load-bearing capacity. Undercut Anchors • Undercut anchors are ultra-reliable and an easy fix / easy solution for high loads in non-cracked and cracked concrete.• There is an extra guaranteed safety due to positive undercutting mechanism.• The anchors are produced from high strength durable materials that offer additional guarantees of safety.• They are suitable in applications where there is a need to reduce the edge distances and anchor spacing in the concrete. Option 7 ETA Approved The many benefits associated with undercut anchors mean that their use is not just restricted to Option 1 (Stress/ Load) areas of application. Many Option 7 areas of application still have requirements for ultra-high loads, close concrete edge distances and close anchor spacings. Option 7 being the ETA designation for the consideration of concrete which is not acting in tension and so is non-cracked. Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Please make your 'no. of items in pack', 'size' and 'quantity', of packs selection from the drop down menus. M10 Stainless Steel Grade A4/ 316 Throughbolt Masonry Anchor Lengths available: Anchor Hole Size Anchor Length 10mm 60mm 10mm 85mm 10mm 105mm 10mm 125mm 10mm 175mm 10mm 215mm Table to show important installation settings/ measurements: All measurements in mm Size Anchor Fixture Diameter Length Max. Thickness Hole Diameter M10 10 65 5 - 11 80 20 10 85 25 15 95 35 25 115 55 45 130 70 60 140 80 70 150 90 80 180 120 110 Installation and Advice Before installation, check the concrete’s strength/ grade, closeness to the edge etc. in order to make sure its class/ standard is suitable. Reliability of masonry anchors starts with the substrate. The concrete base must be compact and crack free or a through bolt, expansion anchor will fail. Installation temperature range for base material: -5 / + 40 ºC (80 ºC for a short period of time). Minimum installation depth values must always be respected: for anchors’ depth, for anchor-to-anchor distances and for anchor-to-edge distances. Drilling must be performed by respecting the specified minimum depth and diameter, perpendicular to the base material’s surface. The holes on the material to be fixed may be used as templates. When drilling near any reinforcement areas, special care must be taken to avoid damaging them. If drilling is aborted because a reinforcement area has been encountered, it is advisable to drill a new hole at a minimum distance of at least twice the aborted drill hole diameter. This advisable distance may be reduced, as long as the aborted hole is previously filled up with high-resistant mortar. It is necessary to clean the holes thoroughly free of dust and debris with a suitably sized brush. When temperature is below 0ºC, make sure water does not seep into the hole, as this fact could cause subsequent cracks on the concrete, due to ice pressure. Introduce the anchor through the material to be fixed into the hole up to the embedment depth, according to the values on the table. It is possible to use a hammer to ensure the required depth. Do not apply any intermediate layer between the material to be fixed and the washer, such as sealing products. Apply the specified torque with a torque wrench. In the case the holes on the material to be fixed have a bigger diameter than required, it is necessary to insert a thicker washer and of a bigger diameter. But please, note that this procedure does not ensure a correct distribution of shear loads amongst all the anchors of a same group, and this shear load is applied only to the anchors with a correct diameter on the material to be fixed. Image is for illustrative purposes only.
M10, Throughbolts, A4/ 316 Stainless Steel, Heavy Duty Masonry, Concrete Anchor.
M10, ETA Approved Option 7, Throughbolts, A4/ 316 Stainless Steel, Heavy Duty Masonry, Concrete Anchor
Fixaball sells all lengths of M10 though/ rag bolts, in A4/ 316 Stainless Steel.
Stainless Steel Grade A4/ 316 Throughbolt Masonry Anchor Throughbolt, expansion anchors are uséd for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. The Stainless Steel Throughbolt is grade A4/316. It is the ultimate "through fixing" with the hole diameter as the bolt diameter. It is ideal for bolting in place awkward fixtures without the need for marking out, removal and repositioning. It is a torque controlled anchor suitable for use in concrete over C20/25 strength.
A4/ 316 Stainless Steel
A4 Grade Steel is also known as 316 and so, both are included in the description. This is the marine grade, stainless steel that can resist heavy weathering and chemical attack. It's application is uséd where the fixing will be prone to constant water, air and chemical exposure (eg. salt). A4/ 316 has a similar tensile strength to 8.8 high tensile steel.
Advantages of a Through Bolt
- High Performance, cost effective anchor for non-cracked substrates eg. concrete
- Suitable for reduced embedment to avoid contact with rebars/ reinforcement cages.
- Holes are the same diameter as the fixings so the fixing can be passed through the fixture after locating it in the right position.
- Cold formed body provides consistent dimensional accuracy and material stability.
- High load-bearing capacity.
Undercut Anchors
• Undercut anchors are ultra-reliable and an easy fix / easy solution for high loads in non-cracked and cracked concrete. • There is an extra guaranteed safety due to positive undercutting mechanism. • The anchors are produced from high strength durable materials that offer additional guarantees of safety. • They are suitable in applications where there is a need to reduce the edge distances and anchor spacing in the concrete.
Option 7 ETA Approved
The many benefits associated with undercut anchors mean that their use is not just restricted to Option 1 (Stress/ Load) areas of application. Many Option 7 areas of application still have requirements for ultra-high loads, close concrete edge distances and close anchor spacings. Option 7 being the ETA designation for the consideration of concrete which is not acting in tension and so is non-cracked.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your 'no. of items in pack', 'size' and 'quantity', of packs selection from the drop down menus.
M10 Stainless Steel Grade A4/ 316 Throughbolt Masonry Anchor Lengths available:
Anchor Hole Size
| Anchor Length
|
10mm
| 60mm
|
10mm
| 85mm
|
10mm
| 105mm
|
10mm
| 125mm
|
10mm
| 175mm
|
10mm
| 215mm
|
Table to show important installation settings/ measurements:
All measurements in mm
|
Size
|
Anchor
|
Fixture
|
Diameter
|
Length
|
Max. Thickness
|
Hole Diameter
|
M10
|
10
|
65
|
5
|
-
|
11
|
80
|
20
|
10
|
85
|
25
|
15
|
95
|
35
|
25
|
115
|
55
|
45
|
130
|
70
|
60
|
140
|
80
|
70
|
150
|
90
|
80
|
180
|
120
|
110
|
Installation and Advice
-
Before installation, check the concrete’s strength/ grade, closeness to the edge etc. in order to make sure its class/ standard is suitable. Reliability of masonry anchors starts with the substrate.
- The concrete base must be compact and crack free or a through bolt, expansion anchor will fail.
-
Installation temperature range for base material: -5 / + 40 ºC (80 ºC for a short
- period of time).
-
Minimum installation depth values must always be respected: for anchors’ depth, for anchor-to-anchor distances and for anchor-to-edge distances.
- Drilling must be performed by respecting the specified minimum depth and diameter, perpendicular to the base material’s surface. The holes on the material to be fixed may be uséd as templates.
-
When drilling near any reinforcement areas, special care must be taken to avoid damaging them. If drilling is aborted because a reinforcement area has been encountered, it is advisable to drill a new hole at a minimum distance of at least twice the aborted drill hole diameter. This advisable distance may be reduced, as long as the aborted hole is previously filled up with high-resistant mortar.
- It is necessary to clean the holes thoroughly free of dust and debris with a suitably sized brush.
-
When temperature is below 0ºC, make sure water does not seep into the hole, as this fact could cause subsequent cracks on the concrete, due to ice pressure.
- Introduce the anchor through the material to be fixed into the hole up to the embedment depth, according to the values on the table. It is possible to use a hammer to ensure the required depth. Do not apply any intermediate layer between the material to be fixed and the washer, such as sealing products.
- Apply the specified torque with a torque wrench.
- In the case the holes on the material to be fixed have a bigger diameter than required, it is necessary to insert a thicker washer and of a bigger diameter. But please, note that this procedure does not ensure a correct distribution of shear loads amongst all the anchors of a same group, and this shear load is applied only to the anchors with a correct diameter on the material to be fixed.
Image is for illustrative purposes only.
×
×
×
×
×
×
×
Tell a friend
Visit store
Watch now
Postage info
Royal Mail 48 - £0.00
Royal Mail Tracked 24 - £2.50
UPS Next Day - £9.00
Royal Mail Tracked 48 - £1.75
Click the Postage tab above the listing description for more info
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Paying via Direct Deposit
Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.
Additional Information
No additional information at this time
Ask seller a question
You might also like
M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427
M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912
BSW Whitworth 3/16" Socket Cap Screw High Tensile 12.9 DIN 912
UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Fixaball
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
Returns
Returns are accepted
Items must be returned within
60 days
of the auction ending
Seller will pay for return shipping.
Additional Information:
'No Quibble' Guarantee. You do not need a reason to request a return. All returns are automatically accepted. Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging and saleable. To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted (if applicable). i.e. Restocking Fees. Any item not in its original condition, is damaged or missing parts for reasons not due to our error Any item that is returned more than 30 days after delivery.
eBay integration by