DLC-6820 Introduction
The reading distance we expressed above is space test distance without any interference. If it is used for car parking, Please refer to the differences of the vehicle's windscreen media, it is determined by the field test.
Model | DLC-6890(C/E) | DLC-6820(C/E) (This is it) |
Max range(M) | 30M | 8M |
Reliable range(M) | 12M | 3M |
Card type | C:6C protocol(single card),E:6C protocol(multi-cards) | |
Size(MM) | 460*460*45 | 250*250*60 |
Support criteries | ISO-18000-6C(EPC G2) | |
Antenna Gain | 12dbi circular polarization | 7dbi circular polarization |
Antenna Power(W) | 1 | 1 |
Interface | RS232,RS485,Wiegand26,Wiegand34 | |
High speed recognition | 120KM/H | |
Packing Dimension(cm) | 51*51*17 | 44*26*9 |
Net weight(KG) | 5.5 | 2 |
Working method | passive | passive |
For occasions | Outdoor | Outdoor |
Working temperature(c) | -35~+65 | |
Storage Temperature(c) | -45~+95 | |
Voltage | DC-12V | |
Power(W) | 5 | 5 |
Integrated/seperated | Antenna built-in | Antenna built-in |
Pins description:
RED | 12VDC |
BLACK | GND |
YELLOW | WIEGAND DATAO(most of access controller can accept Wiegand26 format) |
GREEN | WIEGAND DATA1(most of access controller can accept Wiegand26 format) |
BLUE | TRIGGER T+(when T+ connects to T-,data can be output,this is designed for vehicle detector) |
BLACK | TRIGGER T-(when T+ connects to T-,data can be output,this is designed for vehicle detector) |
PURPLE | RS232 RXD(receiver of RS232) |
WHITE | RS232 TXD (Transfer of RS232) |
BLACK | GND |
Features
1.Interface:
Optinal RS232,RS485,Wiegand 26,Wiegand 34.you can select one of them.Addtion:RS485 has two method.A.no RS485 protocol just for increase the data transferring range.B.if you need,we can provide SDK and burn a ID address to each reader in order to link up to 128 units onto a RS485 bus.(if you do need such model,please contact me at first)
2.Working method:
a.Triggering. The reader has a triggering port.Upon triggering method,reader sents card numbers only while the triggering port gets a high level pluse.
b.Interval. The reader working constantly,transfer the card number continuously while a card appears in the reading range.you can adjust the interval of signal.
c.Master-slave method.By such a method,you can get the card number whenever send a trigger sigal by RS232.You can develop by SDK we provide.
3.Reading range:
Range can be adjusted from 10% to 100% of max range with a software by yourself to correspond your requirement.
Technical parameter
Operating frequency:902~928MHZ
Product dimension:250X250X60MM
Operating voltage :DC-12V
Power consumption(max):5W
Storage temp:-45~+95 c
Operating temp:-35~+65 c
Supporting agreement:ISO-18000-6C(EPC G2),ISO-18000-6B(choose one )
Antenna gain:7dbi circular polarization
Antenna power:Access antenna power 1W(adjustable)
Data interface:At the same time with RS232 RS485 Weigand26 or 34data interface
Rapid recognition:can identify fast-moving electronic labels , the speed is faster than 120km/h.
Packaging weight:2.0kg
Accessories
10 pcs of standard 85*54*0.8mm card.
1 pcs License tag
A set of iron frame,A 100~240VAC to 2A/12VDC power supplier,a RS232 cable.