Linear Actuator 500-1500N 50-300mm Electric Motor 12V DC for Auto Door

EUR 16,58 Buy It Now 8d 5h, FREE Shipping, 30-Day Returns, Pay with PayPal and you're fully protected.

Seller: Top-Rated Seller d-light-factory (1.499.117) 97.5%, Location: HK, Ships to: Worldwide, Item: 312936767833 Similar Items Description Item Description: This miniature linear actuator is using for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications. It can be replaced by hydraulic, pneumatic products ideal for saving energy consumption. Material: Aluminum alloy Load capacity: 500N/750N/900N/1500N Input Voltage: 12V DC Stroke Length: 50mm/2 inch 100mm/4 inch 150mm/6 inch 200mm/8 inch 250mm/10 inch 300mm/12 inch Working frequency: 20% Built-in limit switches,not adjustable after leave factory. Technical Parameters: Rated power: 20W, maximum 30W. Push bar Each side contains a travel limit switch. When the telescopic bar runs to the top or to the top, it will automatically disconnect the electricity. The motor will not idle. Cut off the power, it can be stop at any position, with self-locking function. The push rod is driven by a DC motor with a screw drive. The telescopic rod can only be retracted without rotation. The motor is positive and negative. For example, if the positive electrode is stretched and the negative electrode is shrunk, the telescopic direction of the rod can be changed by changing it. Ambient temperature -20°C to +75°C. Standard protection class: IP54. Low noise design, noise level less than 42dB. Please do not disassemble the machine. Product features: drive other objects to push, pull, rise, drop. Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more. Installation size ( Straight Linaear Actuator ): (1): The center distance between the two mounting holes before and after the push rod is fully retracted, that is, the minimum mounting distance of the push rod (that is, the length of the push rod itself). Below 300mm stroke L (mounting dimensions) = 100mm + S (stroke) 300mm and 300mm above travel L (mounting dimensions)=148mm+S (travel) (2): Center distance between the two mounting holes before and after the push rod is fully extended (Below 300mm stroke) = 100mm + S (stroke) + S (stroke) (300mm and 300mm strokes or more) = 148mm + S (stroke) + S (stroke). Notice: Before use, first recognize whether the motor voltage is correct. If it is a DC motor, then also consider that the power supply current is sufficient. Do not store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency. When soldering is required on the positive and negative power supplys motor terminals, the soldering iron temperature is 340°C±40°C. Within 3 seconds of heating time. Do not deform the plastic. When installing the motor, pay attention to whether the screws are too long and the company must not over-press the long screws to the parts inside the motor. Package Included: 1×Linear Actuator Motor #1 Wireless Remote Control Specifications: Input Power:DC12V RF Frequency:433MHZ Receive sensitivity: -105dbm Transmitting distance:>100m (pen space) Decoding mode:MCU software decoding Support remote type: Learning code Dimension of PCB:68*48*18mm Dimension of Shell:76*56*30mm Wiring Diagram: +V:12V + input GND:12V - input Motor:12V DC Linear output S1/S2:Limit switch output G:Limit switch output GD:Limit LED output Learning code: 1.Push the learning key on the receiver once time , the LED will be on. 2.Push the remote button , LED indicator on the receiver board will flash for 3 times 3.After that,the learning code is matched successfully Clearing code : 1.Press the learning button on the receivers until the led Light stop flashing ,the codes will be cleaned. 2.After clearning the code, all the remote control cannot work any more. Package Included: 1*Remote Control Switch 1*Reciever Board #2 Wireless Remote Control This unlatched remote control switch was designed to remotely control linear actuator motors. It can also be used to control any 12V or 24V DC motor rated at 5 amps or less. Features: -Very quick and easy installation (See photo gallery for wiring diagram) -Wireless remote control receiver is simply wired in between the DC power supply and the linear actuator or DC motor. -Controls the up/down/stop or clockwise/counterclockwise/stop movement of 12 or 24 volt DC motors -Excellent range of up to 90 feet Specifications: Material:ABS Working voltage:AC 100-240V DC Input range:DC 10-30V Current rating:Maximum 5 amps Remote Control Range: 90 feet maximum (range is reduced by physical obstructions) Operating Frequency:433.92 Mhz Operating Current: 15mA Weight:155g Package Included: 1*Wireless remote control 1*Receiver 1*Cable connector Detail Image Payment 1.We accept PayPal only. 2.All major credit cards are accepted through secure payment processor PayPal. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. 2.Items will be shipped within 1-3 business day when we received payment. 3.Delivery time depends on destination and other factors; 4.International buyers please note: a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties. b.Please check with your countrys customs office to determine what these additional costs will be prior to buying. Condition: Brand New, Bundle Listing: Yes, Actuation Force: 500N/750N/900N/1500N, Voltage: 12V, Model: Linear Actuator Motor, MPN: DRL1441245, Brand: SOLOOP, Input Voltage:: 12V DC, Load capacity:: 500N/750N/900N/1500N, Contents of the package: 1×Linear Actuator Motor, Material:: Aluminum alloy, Certification:: CE&SGS, Waterproof Rate:: IP65, Operation Temperature:: -26 ° C ~ +65 ° C, Fast Fulfillment:: YES, Non-Domestic Product:: No, Model:: DC 12V Linear Actuators, Modified Item:: No, Custom Bundle:: No, Type:: Linear Actuator, Speed:: As description, Max Push Load:: 1500N/150KG/330lbs, Max Pull Load:: 1200N/120KG/264lbs, Duty Cycle:: 25%, Operating Frequency:: 20%, Manufacturer Part Number: DRL1441245

PicClick Insights PicClick Exclusive
  •  Popularity - 346 views, 4.2 views per day, 83 days on eBay. Super high amount of views. 1 sold, 111 available.
  •  Price -
  •  Seller - 1.499.117+ items sold. 2.5% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items