Waterproof
IP65 waterproof, suitable for both indoors & outdoors.
LED Emergency Bulkhead
(Exit Legends Included)
This LED bulkhead can be maintained or non-maintained. A maintained light is kept switched on and stays on in the event of a power cut, whereas a non-maintained only springs into action in the event of a crisis.
Specifications
• Wattage: 3W (30pcs SMD LED)
• Battery: 3.6V Nickel Cadmium
• Dimension: 340(L)x115(W)x70(H)mm
• Colour Temperature: 6000K
• Input Voltage: AC110-240V
• Emergency Duration: ≥3 Hours
• Warranty : 2 Years
Installation
|
|
|
|
---|---|---|---|
Step 1 Unscrew from the back of the fixture. | Step 2Push the buckle to open. | Step 3Connect L and N to building utility. If using maintained working mode, keep L and SL jumper connected. If using non-maintained working mode, disconnect L and SL and dispose the jumper. | Step 4Connect the battery to connector on the PCBA. Assemble the fixture back together. Restore power and cut off again. LED will work with backup battery on emergency mode. Restore power to complete the installation. |
3.2V 1500mAh Battery
With a built-in 3.2V 1500mAh battery, the emergency light is able to remain enough brightness for at least 180 minutes during power outages and ensures adequate evacuation times.
Features
• Normal and self-test version.
• Green colour LED indicator.
• Output short protection.
• Battery over charge & deep discharge protection.
1W LED Emergency Spotlight
This non-maintained LED Emergency Light is designed to turn on in the event of a power failure. It is linked into the building's lighting circuitry and reacts to a power failure ensuring emergency exit routes remain illuminated.
Specifications
• Wattage: 1W
• Colour Temperature: 6000K
• Input Voltage: AC220-240V
• Emergency Duration: ≥3 Hours
• IP Rating: IP20 (Indoor Use Only)
• Cut-Out Size: 32-36mm
• Warranty : 2 Years
• Certifications: Safety Compliance - EN61347, EMC Compliance - EN55015, EN61000, EN61547, EMF Compliance - EN62493
6.4V 1500mAh Battery
With a built-in 6.4V 1500mAh battery, the emergency light is able to remain enough brightness for at least 180 minutes during power outages and ensures adequate evacuation times.
Features
• Normal and self-test version.
• Green colour LED indicator.
• Output short protection.
• Battery over charge & deep discharge protection.
3W LED Emergency Spotlight
This non-maintained LED Emergency Light is designed to turn on in the event of a power failure. It is linked into the building's lighting circuitry and reacts to a power failure ensuring emergency exit routes remain illuminated.
Specifications
• Wattage: 3W (300Lms)
• Colour Temperature: 6000K
• Input Voltage: AC220-240V
• Emergency Duration: ≥3 Hours
• IP Rating: IP20 (Indoor Use Only)
• Cut-Out Size: 70-140mm
• Warranty : 2 Years
• Certifications: Safety Compliance - EN61347, EMC Compliance - EN55015, EN61000, EN61547, EMF Compliance - EN62493
3.2V 600mAh Battery
With a built-in 3.2V 600mAh battery, the emergency light is able to remain enough brightness for at least 180 minutes during power outages and ensures adequate evacuation times.
LED Emergency Exit Light
This LED Exit Light can be maintained or non-maintained. A maintained light is kept switched on and stays on in the event of a power cut, whereas a non-maintained only springs into action in the event of a crisis.
Specifications
• Wattage: 2W (60Lms)
• Visual Range: 26M
• Input Voltage: AC220-240V
• Emergency Duration: ≥3 Hours
• IP Rating: IP20 (Indoor Use Only)
• Warranty : 2 Years
• Certifications: Safety Compliance - EN61347, EMC Compliance - EN55015, EN61000, EN61547, EMF Compliance - EN62493
Installation (Multiple Mounting Options)
|
|
|
|
---|---|---|---|
Wall mounted accessories are included. | Wall mounted accessories are included. | Wire Length: 1.5M. Suspended accessories are not included. | Cutting Hole: 300mm. Recessed bracket is not included. |
2.5W Universal LED Emergency Power Pack
This universal LED Emergency Power Pack is an effective solution for emergency conversion and can be used with a separate mains driver for Maintained and Non-maintained applications for both normal and emergency operations. The model is compatible with LED lamps ranging from 10-90VDC, making it easy to convert any existing LED to one in an emergency. When in operation the unit will provide a 2.5W output with constant power with a rated output voltage of 10-90V. The unit has a discharge protection circuit, overload, short circuit, and battery low voltage protection.
Each unit includes a battery pack, an LED charge indicator, a test switch, and an emergency power module.
Specifications
• Battery: 6.4V 1500mAh LiFePO4
• Input Voltage: 220-240V • Charge Voltage: 7.3VDC (Max.) • Charge Current: 200mA • Output Voltage: 10-90VDC • IP Rating: IP20 • Emergency Duration: 1.5-3 Hours • Battery Charge Time: 16 Hours • Dimension: 199(L)x55.2(W)x24.5(H)mm • Warranty: 2 Years • Certifications: Safety Compliance - EN61347, EMC Compliance - EN55015, EN61000, EN61547, EMF Compliance - EN624935W Universal LED Emergency Power Pack
This universal LED Emergency Power Pack is an effective solution for emergency conversion and can be used with a separate mains driver for Maintained and Non-maintained applications for both normal and emergency operations. The model is compatible with LED lamps ranging from 10-90VDC, making it easy to convert any existing LED to one in an emergency. When in operation the unit will provide a 5W output with constant power with a rated output voltage of 10-90V. The unit has a discharge protection circuit, overload, short circuit, and battery low voltage protection.
Each unit includes a battery pack, an LED charge indicator, a test switch, and an emergency power module.
Specifications
• Input Voltage: AC 220-240V 50/60Hz • Charge Voltage: 7.3VDC (Max.) • Charge Current: 200mA • Battery: 6.4V 3000mAh LiFePO4 (2.5W 6Hrs, 3.5W 4Hrs or 5W 3Hrs) • Constant Power: 2.5W/3.5W/5W (Battery) • LED Power: 1.9W/2.7W/3.8W (Max.) • Output Voltage: 10-90VDC • U-OUT=90V (Max.) • IP Rating: IP20 • Dimension: 250(L)x60(W)x32(H)mm • Ta: 0~45°C, Tc: 60°C • Warranty: 2 Years • Certifications: Safety Compliance - EN61347, EMC Compliance - EN55015, EN61000, EN61547, EMF Compliance - EN62493
IP44 rated, suitable for any room including bathroom.
LED Emergency Ceiling Light
A unique ceiling or wall lighting solution to illuminate rooms in your home and also in commercial settings. It has emergency function that will continue to work even in the event of a power failure. This allows the unit to double as a standard light fitting but still supply the necessary backup in the event of a power outage.
Specifications
• Wattage: 24W (1920Lms)
• Material : Top Quality PMMA Acrylic
• Beam Angle: 160 Degrees
• Battery: 7.4V 2200mAh
• Dimension: 330(D)x65(H)mm
• Colour Temperature: 4000K or 6000K
• Input Voltage: AC220-240V
• Emergency Duration: ≥3 Hours
• Lifespan: 50,000 Hours
• Warranty : 2 Years
Microwave Motion Sensor
How to set the sensor?
|
|
|
|
---|---|---|---|
Step 1 Open the cover to adjust the microwave setting. | Detection AreaDetection area can be reduced by selecting the combination on the DIP switches to fit precisely each application. | Hold TimeRefers to the time period the lamp remains at 100% illumination after no motion detected. | Daylight SensorThe sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. When set to Disable mode, the daylight sensor will be unavailable and the light will not light up until motion was detected. 50lus, 30lux: twilight operation, 10lux, 5lux: darkness operation only.
|
Emergency Setting
Installation
|
|
|
|
---|---|---|---|
Step 1 Twist diffuser anticlockwise to remove from lamp body. Step 2Push the latch to the open position to open the LED board. Step 3Thrust screws through the Waterproof rubber mat screw holes to fix lamp to ceiling/wall. Connect wires to the lamp via the designated waterproof rubber mat wire hole. Step 4Shut the LED board, make sure the latch is in the close position. Return the diffuser to the lamp by twisting it clockwise onto the body of the lamp. |
|
|
|
|
---|---|---|---|
About UsG.W.S LED is a UK-based developer and manufacturer of LED lighting, offering a broad variety of LED products for lighting professionals as well as end users. Our products undergo a certified quality standards procedure to make sure we only stock items with the newest and most reliable technology. | PaymentOur preferred method would be Paypal but we can also accept all major credit/debit cards payment and direct bank transfers. If you use e-cheque on PayPal, delivery may take longer, as we will not be able to process your order until the e-cheque clears. We are a VAT registered company so a VAT receipt can be provided with your purchase. | ShippingI tems will be shipped within 1-2 business days (Monday-Friday) following order completion. We offer Free UK Standard Delivery. However, if you simply can’t wait to get your hands on the product, we have Express Delivery option available for you. | ReturnsIf the items we sent to you is incorrect, or your items have arrived with a manufacturing defect, please contact us within 14 days where we will always offer you the choice of an exchange or refund. If you wish to return unused goods for refund or exchange, they must be returned with their original packaging within 30 days. We will only pay the postage price for any goods that need to be resent due to a fault on our behalf. |