Seller:stedmarklimited✉️(2,804)100%,
Location:Heanor, Derbyshire, GB,
Ships to: GB,
Item:183779211808Impact burner, machining,pre-heating,brewing,heat treatment,gas burner,brewery. Here is Stedmark's replacement for the popular “impact” type burner that is becoming hard to source. These are common in a wide variety of road-marking, brewing, agricultural and industrial equipment. Head diameter is approx 125mm. Normal outputs are 18,000 BTU/Hr at 37 mbar to 21000 Btu/Hr at 50 mbar and much higher if jetted for a large adjustable pressure regulator. Jetting can be done to customer specification. The pictures show burners with a mounting stud. They are usually supplied without this. Please ask when ordering if you would like the studs on the burners, otherwise they will not be present. The inlet tube length can also be specified at the time of ordering. This should be specified as the length of the tube from the centre point of the burner head to the end of the tube, and not the bracket. Any questions, please ask. We supply all other gas equipment you could need, including hoses made to order, regulators, changeover valves, ignition systems etc.