AS PER PICTURE PLEASE VIEW EACH OF THE PICTURES TO GET A BETTER IDEA OF CONDITION SPECIFICS BEFORE BUYING. ALL ITEMS ARE TESTED/CHECKED AND ACCESSORIES, SERIAL NUMBERS RECORDED PRE-DESPATCH.
IF YOU HAVE ANY QUESTIONS SEND US A MESSAGE
Material: | Engineering Plastic |
Test Distance: | 15km |
Probe Type: | InGaAs |
Wavelength Range: | 800-1700 (nm) |
Connector: | FC/SC/ST |
Power Measurement Range: | -70-+6 |
Standard Wavelength: | 850/1300/1310/1490/1550/1625nm |
Red Light Working Wavelength: | 650nm |
Working Temperature: | -10-60℃ |
Automatic Shutdown Time: | 10min |
Battery Working Time: | 48h |
Battery: | 3 x AA batteries( not included) |
LIGHT
Red light on/off, short press to turn on or off. When switched on, the word 650 is displayed on the right-hand side of the LCD.
The word 650 is also displayed at the bottom right of the display
GLINT
With the red light on, press briefly to turn on or off and then press
to turn off the cycle
入
7 different wavelengths(850*1300*1310*1490*1550*1625nm) can be selected and the LCD will display your settings simultaneously.
Switching on/off
Press for one second or less to start, press again.Press the key again to switch off.
UNITS
Change the data unit. You can select dBm, db, uW,unit. The test data will be displayed in the corresponding result poofW,
dBm
The conversion relationship: 10long(mW) = 0(dBm).
REF
The current test result is set or set as a reference value for relative.The set dBm value will be displayed at the bottom right of the display.
1, The LCD display is faint, and the power is not on?
2, Is the LCD not displaying data properly?
Connect the connector and clean the sensor.
3, How do I restore the factory settings?
Package List:
Note: