9kg Servo (Metal Gears) Analog servo with stronger metal gears, wear resistant case. Features double ball bearings and weighs just 55 grams only. Includes 2 servo horns, 4 rubber gromets, 1 servo horn screw and 4 servo mount screws. 40mm long x 19mm wide x 38mm tall (measurements exclude the servo gear and the mounting tabs on either side) Input voltage 4.8v - 7.2v Turning time in seconds 0.25 Part Number: GS-5509MG Made by: GoTeck
Specifications:
GS-5509MG | ||||
Control System | Positive PWM control 1500 usec Neutral | |||
Operation Voltage Range | 4.8V ~ 7.2V | |||
Operation Temperature Range | -20C°~ +60C° | |||
Test Voltage: | At 4.8V | At 6.0V | ||
Standing Torque | 9.2kg.cm | 11kg.cm | ||
Speed | 0.25 sec / 60 deg at no load | 0.23 sec / 60 deg at no load | ||
Idle Current | 250mA at stopped | 300mA at stopped | ||
Running Current | 1200mA at no load | 1500mA at no load | ||
Dead band width | 3 usec | 3 usec | ||
Circle | 10000 times | |||
Operation Travel | 60°±10° | |||
Direction | Re-clock wise/ Pulse Travel 1500 to 1900 usec | |||
Diver type | FET drive | |||
Motor Type | Carbon Brush | |||
Potentiometer Type | Indirect drive | |||
Amplifier Type | Digital Control | |||
Dimensions | 40.8*20.1*38.0 mm | |||
Weight: | 55g without splined horn | |||
Ball Bearing | Double ball bearing | |||
Gear Material | Metal gear | |||
Case Material | Nylon plus fiber | |||
Connector Wire Length | 300mm | |||
Connector Wire Gauge | 22AWG heavy duty(JR Universal) | |||
Wire Info (Brown) | Negative | |||
Wire Info (Red) | Positive | |||
Wire Info (Orange) | Signal | |||
|