|
|
|
|
|
|
|
|
|
|
|
The Following Items Are Included:
- Fluke 741B Documenting Process Calibrator (BC# 26593)
- Fluke BC7217 Battery Charger
- (2) 1000V Hard point Test Leads
- Battery Pack
- AC Adapter/Charger
- User Manual on CD-ROM
- Carrying Case (G)
|
|
|
|
|
|
|
|
|
|
|
|
|
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
|
This Item Has A Current Calibration! |
|
|
Fluke 741B Documenting Process Calibrator
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty
“A complete documenting calibrator”
The 741B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. For documentation, the 741B automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. The 741B is the choice for plants that use standard company worksheets and that make reports in the shop. It has storage capacity for a day's calibration and measurement data. When you're back at the shop recall the data on screen to fill out calibration forms.
The 741B is easy to use with flexible test strategies. And like all Fluke tools, it's rugged, reliable and tough as nails. It's like having several powerful tools in one - so you can work faster than ever:
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
- Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
- Power transmitters during test using loop supply with simultaneous mA measurement
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Measure and source simultaneously with one compact, rugged, reliable tool
- Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
- Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
- Easy to use
- Bright white display. Read both sourced and measured parameters.
- Multi lingual interface
- Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1msec.
|
Measurement Accuracy |
Voltage DC |
110.000 mV |
0.025%+0.015% * |
1.10000 V |
0.025%+0.005% * |
11.0000 V |
0.025%+0.005% * |
110.000 V |
0.05%+0.005% * |
300.00 V |
0.05%+0.005% * | |
Voltage AC |
20 to 40 Hz |
2% + 10 |
40 to 500 Hz |
0.5% + 5 |
500 to 1 kHz |
2% + 10 |
1 kHz to 5 kHz |
10% + 20 |
Ranges: |
1.1000, 11.000, 110.00, 300V | |
Current DC |
30.000 mA |
0.01% + 0.015% * |
110.00 mA |
0.01% + 0.015% * | |
Resistance |
11.000 Ω |
0.05% + 50 mΩ |
110.00 Ω |
0.05% + 50 mΩ |
1.1000 kΩ |
0.05% + 500 mΩ |
11.000 kΩ |
0.1% + 10 Ω | |
Frequency |
1.00 to 109.99 Hz |
0.05 Hz |
110.0 to 1099.9 Hz |
0.5 Hz |
1.100 to 10.999 kHz |
5 Hz |
11.00 to 50.00 kHz |
50 Hz | |
Pressure |
Accuracy |
from 0.025% of range using any of 29 pressure modules. |
|
(for detailed specifications refer to pressure modules in options and accessories) |
|
Modules available for differential, gage, vacuum, absolute, dual and high pressure. | |
Note |
* |
(% of reading + % of full scale) | |
Source Accuracy |
Voltage DC |
110.000 mV |
0.01%+0.005% * |
1.10000 V |
0.01%+0.005% * |
15.0000 V |
0.01%+0.005% * | |
Current DC |
22.000 mA (Source) |
0.01%+ 0.015% * |
22.000 mA (Simulate) |
0.02% + 0.03% * | |
Resistance |
11.000 Ω |
0.01% + 20 mΩ |
110.00 Ω |
0.01% + 40 mΩ |
1.1000 kΩ |
0.02% + 500 mΩ |
11.000 kΩ |
0.03% + 5Ω | |
Frequency |
0.00 to 10.99 Hz |
0.01 Hz |
11.00 to 109.99 Hz |
0.1 Hz |
110.0 to 1099.9 Hz |
0.1 Hz |
1100 to 21999 Hz |
2 Hz |
22.000 to 50.000 kHz |
5 Hz | |
Note |
* |
(% of reading + % of full scale) | |
RTDs and Thermocouples |
Measure Accuracy: |
10 Ω Cu (427): |
2 °C |
100 Ω Pt (3916): |
0.3 °C |
100 Ω Pt (3926): |
0.3 °C |
100 Ω Pt (385): |
0.3 °C |
200 Ω Pt (385): |
0.3 °C |
500 Ω Pt (385): |
0.3 °C |
1000 Ω Pt (385): |
0.3 °C |
120 Ω Ni (672): |
0.3 °C |
note: |
For 2-and 3-wire measurement, add 0.4 °C |
E: |
0.3 °C |
N: |
0.5 °C |
J: |
0.3 °C |
L: |
0.3 °C |
K: |
0.3 °C |
T: |
0.3 °C |
U: |
0.3 °C |
B: |
0.9 °C |
R: |
1.0 °C |
S: |
0.9 °C |
C: |
0.6 °C |
note: |
Accuracy with external cold junction, for internal junction add 0.2°C | |
Source Accuracy: |
10 Ω Cu (427): |
1 °C |
100 Ω Pt (3916): |
0.1 °C |
100 Ω Pt (3926): |
0.1 °C |
100 Ω Pt (385): |
0.1 °C |
200 Ω Pt (385): |
0.1 °C |
500 Ω Pt (385): |
0.1 °C |
1000 Ω Pt (385): |
0.1 °C |
120 Ω Ni (672): |
0.1 °C |
note: |
For 2-and 3-wire simulation, add 0.4 °C |
E: |
0.2 °C |
N: |
0.3 °C |
J: |
0.2 °C |
L: |
0.2 °C |
K: |
0.3 °C |
T: |
0.3 °C |
U: |
0.3 °C |
B: |
0.8 °C |
R: |
0.9 °C |
S: |
0.9 °C |
C: |
0.6 °C |
note: |
Accuracy with external cold junction, for internal junction add 0.2 °C | |
Specifications |
Ramp Functions |
Source functions: |
Voltage, current, resistance, frequency, temperature |
Rate: |
4 steps/second |
Trip detect: |
Continuity or voltage (continuity detection not available when sourcing current) | |
Loop Power Function |
Voltage: |
Selectable, 24 V or 28 V |
Accuracy: |
5% |
Maximum current: |
22 mA, short circuit protected |
Maximum input voltage: |
30 V DC | |
Step Functions |
Source Functions |
Voltage, current, resistance, frequency, temperature |
Manual Step |
Selectable step, change with arrow buttons |
Autostep |
Fully programmable for function, start delay, stepvalue, time per step, repeat | |
Environmental Specifications |
Operating Temperature |
|
-10 °C to +50 °C |
|
-20 °C to +50 °C * | |
Storage Temperature |
|
Dust/water resistance |
|
Operating Altitude |
|
Note |
* |
Except frequency and AC | |
Safety Specifications |
Agency Approvals |
|
CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 | |
Mechanical & General Specifications |
Size |
|
Weight |
|
Batteries |
|
Battery Life |
|
Battery Replacement |
|
Via snap-shut door without opening calibrator; no tools required | |
Side port connections |
|
Pressure module connector |
|
Connection for optional battery eliminator | |
Data storage capacity |
|
1 day of calibration results | |
90 day specifications |
|
The standard specification intervals for the 741B is 1 and 2 years. |
|
Typical 90 day measurement and source accuracy can be estimated by |
|
dividing the one year "% of reading" or "%of output" specifications by 2. |
|
Floor specifications, expressed as "% of full scale" or |
|
"counts" or "ohms" remain constant. | |
For full Fluke 741B product specifications, please click here: Fluke 741B
|
|
|
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. |
| | |
|
|
|
|
|
|
|
|
|
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 |
| | |
|
|
|
|
|
|
|
|
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
|
|
|
|
|
|
| UPS Ground | United States | USD 0.00 |
|
| USPS Express Mail International (EMS) | Worldwide | USD 0.00 |
|
|
|
|
|
|
| | | |
|
|
|
|
|
|
|
|
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED | | |
|
|
|
|
document.write('');
document.write('');
document.write('');
document.write(' ');
|
|