Wet Room Linear Shower Tray Kit With Drain Options - Reinforced & Waterproof

£159.99 Buy It Now, FREE Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: livingheat-underfloor-heating ✉️ (15,835) 99.5%, Location: Torquay, Devon, GB, Ships to: GB & many other countries, Item: 276170251248 Wet Room Linear Shower Tray Kit With Drain Options - Reinforced & Waterproof. SHOWER LAY WETROOM BASE TRAY KIT - 1000MM TO 1500MM + FAST FLOW DRAIN Tile Heating Wood Heating Laminate Heating Thermostats Insulations Shower Trays

Wet Room Linear Shower Tray Kit With Drain Options 

OUR BEST SELLER!

SHOWER LAY WETROOM BASE TRAY WITH LINEAR DRAIN. PERFECT FOR DISABLED ACCESS, TILE OVER LEVEL ACCESS SHOWER TRAY.

Choose from five stylish options of Stainless Steel Drain Covers to enhance your Shower Tray.

For centre and offset drain options, visit our other shower tray listing: Square Drain Shower Trays

Our Living Heat wet room bathroom level access walk-in shower tray kits come complete with a fast-flow drain, full fitting instructions, and pre-formed falls for easy tiling and water drainage. Designed for use with under-tile heating systems, these trays are highly insulated and can accommodate seats or wheelchairs once tiled.

Easily install a level, unobstructed shower tray base with pre-installed falls that direct water towards the drain. Each tray includes a pre-installed stainless steel linear drain with a fast-flow trap and your choice of five elegant stainless steel grate insert options. We stand behind our product with a lifetime manufacturer warranty and technical support helpline. Available in five sizes, or easily customise the size by cutting it down or adding tile backer boards to extend the area.

PRODUCT COMES WITH
Stainless Steel Linear Drain/Grate
Waste Kit

You may also require General Information Fitting Instructions

FAST-FLOW DRAIN KIT INCLUDED

Shower Drain Option 6 - Reversable.

The drain cover is reversable with both tile-in option and a plain stainless steel surface option.

STEP 1 Side A = Tile in side ready to be tiled into. STEP 3 If not tiling then pop off clips and flip cover over. STEP 3 Side B = flat stainless steel side.  STEP 4 Replace clips on revers to leave stainless side up.

Dimensions of Linear Drain Shower Tray Options
Information
Shower Tray - Available in multiple sizes - 900 x 900mm, 900 x 1000mm, 900 x 1200mm, 900 x 1500mm, 1000 x 1000mm, 1000mm x 1250mm and 1000 x 1500mm
Fast Flow Drain
Stainless Steel Grate
Full fitting instructions
Technical Free Phone Help Line
FREE next working day delivery service

PLEASE NOTE

* The natural fall of the tray must always be maintained to effectively guide water toward the drain. The tiles must however finish flush with or higher than the grate cover.

* During the tiling / grouting process the drain and grate should be covered to make sure adhesive, grout and other debris does not enter the drain.

* Living Heat Under floor heating is suitable for use directly over the showerlay trays but the must not obstruct the drain.

* All Living Heat trays can be cut down in size if required but no cut edge must come within 150mm of the drain.

* The tray must be fully bedded on a suitable good quality flexible tile adhesive. Particular care should be taken to ensure all drain edges and outer edges of the tray are fully bedded to maximize support and minimize movement.

ROOM TANKING

If using Living Heat cementitious tile backer boards with our wet room show lay trays, please follow the following instructions to create a tanked wet-room area ready for tiles to be fitted directly over.

1a: Fix 6mm, 10mm, 20mm, 30mm tile backer boards down to a sound level floor using a good quality flexible cement based tile adhesive or screws and board washers at maximum 40cm centres, (minimum 12 washers per board). All joints should be butted up tight together and boards staggered where possible.

2a: When lining walls or ceilings 10mm, 20mm or 30mm boards can be used and fitted using screws and washers. Fixings must be at maximum 400mm centres, (minimum 12 per board). All boards should be tightly butted together.

3a: All joints should be taped with Living Heat self adhesive waterproof tape. Corner joins should first be filled with a waterproof sealant prior to pre made waterproof corners being fitted or other tape being laid over. When taping start with all lower joints working away from the drain position. Any vertical joints should be done last and extended down over any lower tape / joints already completed.

SHOWER TRAY FITTING INSTRUCTIONS - OFFSET LINEAR DRAIN

IMPORTANT INFORMATION When fitting Living Heat showerlay shower trays it is important to follow the correct procedure to achieve the best results. Below we have included a instructional guide to achieve best results when fitting Living Heat showerlay trays. If you have any further questions please feel free to contact Living Heat Technical.

1

1: The floor surface (wood or concrete) must be solid, level and ready to accept a standard 1-part flexible tile adhesive (used to hold the tray in place). Lay the tray in place and mark the tray position clearly onto the floor with a marker pen.

2

2: Use a saw to remove the marked out section of the floor into which the shower tray will fit. Be sure to remove any old nails or screws from the timbers. CAUTION: Use safety goggles when using power tools!

3

3: Install suitable batons to sides of timber joists. Position the batons below the top of the joists to allow 18mm ply to sit flush with the top of the joists. Screw the batons and ply into position.

4

4: Please take some time to ensure the plywood sections and batons are fitted well and level.

5

5: With the batons and plywood sections fitted. Lay the shower tray on top of the plywood. And using a marker pen, draw around the position of the drain hole. Cut a hole for the drain in the plywood underneath.

6

6: Fit the drain and solvent weld the waste pipe to align with the shower tray and the hole in the centre plywood. Ensure the waste pipe has some fall off to ensure water drains from the drain bowl.

7

7: With the batons, and plywood sheets fitted and with drain hole done, it is time for one final check before applying a 1-part flexible tile adhesive ready to lay the shower tray in place.

8

8: Using a flexible 1-part tile adhesive and suitable trowel, lay a good, even coat of adhesive to the top of the prepared plywood floor area. Be careful NOT to allow any adhesive to enter the drain bowl.

9

9: After laying a bed of flexible tile adhesive, carefully lower the shower tray into position. Press the shower tray into position evenly. Be careful NOT to allow any adhesive to enter the drain bowl.

10

10: Use a spirit level to ensure the shower tray is nice and level in all directions. The natural fall of the tray must always be followed to guide water toward the drain.

11

11: Allow some time for the tile adhesive and sealant to set. The shower tray is now ready for tiling. You can use Living Heat Tile Backer boards to cover the remaining floor area, ready for tiling. IMPORTANT: To make sure you receive the correct sizes if you are unsure of what you require. Please do not hesitate to contact us. If possible, please provide us with a sketch or measurements of the floor area you would like covered. And we will advise you on which product would best suit your requirements.

About Living Heat

Living Heat Ltd is an electric underfloor heating and insulation specialist. As part of the The AWK Group, Living Heat also has access to a large range of other products that work with and complement its underfloor heating and insulation range. Living Heat is located in the South West and distributes throughout the UK and to a growing Worldwide customer list. Although we have been selling underfloor heating since 1999, Living Heat joined the group in 2014. Due to the rapid growth of online shopping Living heat was formed to focus on offering specialist web-based sales of underfloor heating and insulation direct to customers. Prior to 2014, our underfloor heating sales were driven through trade and showroom outlets.

Our aim is simple and has never changed. To offer high-quality electric under-floor heating systems and ancillary products at competitive prices, backed up with expert knowledge and highly efficient, friendly and comprehensive service.

We offer FREE technical help and advice on all Living Heat underfloor heating systems and ancillary products to the public and trade alike. If you have any questions or require assistance with any projects you are considering please do not hesitate to contact us. We are here to help.

Contact Information

Delivery Information

Orders placed before 12:00 will be dispatched the same day on a next working day delivery service. During busy periods we can not guarantee your packages will be sent out on the same day. To minimise any delays please make sure you provide us with a valid telephone number. Our couriers try their best to deliver the next day and currently have a 98% success rate. However, the next working day, delivery is not guaranteed. All our deliveries can be tracked so don't hesitate to ask one of the staff who will be happy to help. For some remote UK locations, we do have to make a small additional delivery charge. If you are unsure if your location could be considered remote please feel free to contact us before you buy.

Please note: Liquids cannot be sent to international addresses due to current aviation regulations.

Our Delivery Network

Returns

We're committed to selling high-quality products, however we also know that there are times when you need to exchange or return an item bought from us. Returns are accepted within 60-days and a full refund will be issued less any P&P costs incurred by us. Please make sure the goods are sent back in good working order and in the original packaging. (Please do not forget to include a note with your name, address and copy of your original invoice if possible).

Feedback

At Living Heat, we pride ourselves on giving 100% Customer Service and in the unlikely event you experience any problems or faults with your purchase, before leaving feedback for us, please contact us directly via eBay Messenger by clicking on the 'ask a question' link near the bottom of the listing or call us. We will endeavour to rectify any issues you may have with your item/s or if there are any discrepancies with the description, in relation to the item/s received.

Terms & Conditions

When you order products from us they will be sold to you by Living Heat Ltd. Full Terms & Conditions can be found on our main website.

© 2023 Living Heat Ltd. All rights reserved. Registered in England & Wales No: 5466356. - VAT No: 861161442
  • Condition: New
  • Shower Tray Size: 1m x 1m + OPTION 5 Drain
  • Shape: Rectangle
  • MPN: SHL1
  • Set Includes: Drain Cover & Waste
  • Item Length: 100 cm, 125 cm, 150 cm
  • Suitable For: Bathroom, Wetroom, Wet Room, Shower
  • Brand: Linear
  • Type: Shower Tray
  • Manufacturer Warranty: 10 Years
  • Manufacturer: Living Heat
  • Drain Location: Offset On Long Length
  • Country/Region of Manufacture: United Kingdom
  • Room: Bathroom
  • Height (mm): 30
  • Item Width: 100 cm

PicClick Insights - Wet Room Linear Shower Tray Kit With Drain Options - Reinforced & Waterproof PicClick Exclusive

  •  Popularity - 18 watchers, 0.1 new watchers per day, 135 days for sale on eBay. Super high amount watching. 0 sold, 10 available.
  •  Best Price -
  •  Seller - 15,835+ items sold. 0.5% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive