FREE SHIP! Wantai 4Axis Stepper Motor Nema23 4.2A 425oz-in Dual Shaft nice CNC

Sold EUR 235,42 Buy It Now or Best Offer, FREE Shipping, 14-Day Returns, Pay with PayPal and you're fully protected.

Seller: wantmotor2013 (1.082) 100%, Location: Paris, Ships to: Worldwide, Item: 182751858392 Great News from Wantaimotor! Ship from Germany warehouse to European Union Customers! No taxes from customs, no damage, better service, please don't hesitate! Free Ship by DHL! This Item includes: 4PCS Stepper Motor Nema23 WT57STH115-4204B Dual SHAFT 4.2A 425OZ-IN 4PCS Stepper Motor Driver DQ542MA 4.2A 50V 128Microsteps 2PCS Power Supply 350W 36V 1PC Breakout Board&1PC Cable For free 1 stepper motor: WT57STH115-4204B Technical SpecificationsPart No.: WT57STH115-4204B DualShaftFrame Size: NEMA23Step Angle: 1.8 degreeVoltage: 3.78VDCCurrent: 4.2 A/phaseResistance: 0.9 Ohm/phaseInductance: 3.8 mH/phaseHolding torque: 30Kg-cm 428oz-inRotor inertia: 810 g-cm2Detent torque: 1.2 kg-cmNumber of wire leads: 4Weight: 1.55KGLength: 115mmFront shaft diameter: 8mmFront shaft length: 21mm round shaft Black A+Green A-Red B+Blue B- 2.DQ542MA driver Introduction:DQ542MA is a type of two-phase hybrid stepping motor driver, the drive voltage of it is from18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adoptsis smiliar to the circuit of servo control which enables the motor run smoothly almost withoutnoise and vibration. Holding torque when DQ542MA runs under high speed, is also significantlyhigher than the other two-phase driver, what’s more, the positioning accuracy is also higher.It is widely used in middle and big size numerical control devices such as curving machine,CNC machine, and computer embroider machine, packing machines and so on. Features: High performance, low price Average current control, 2-phase sinusoidal output current drive Supply voltage from 18VDC to 50VDC Opto-isolated signal I/O Overvoltage, under voltage, overcurrent, phase short circuit protection 15 channels subdivision and automatic idle-current reduction 8 channels output phase current setting Offline command input terminal Motor torque is related to speed, but not related to step/revolution High start speed High holding torque under high speed Electrical specification: Input voltage18-50VDCInput current< 4AOutput current1.0A~4.2AConsumptionConsumption:80W; Internal Insurance:6ATemperatureWorking Temperature -10~45℃;Stocking temperature -40℃~70℃HumidityNo condensation, no water dropletsgasProhibition of combustible gases and conductive dustweight300GS 3 power supply:350W 36V Index TypeS-350-5S-350-7.5S-350-12S-350-15S-350-24S-350-27S-350-48DC Voltage5V7.5V12V15V24V27V48VVoltage Tolerance± 2%± 2%± 1%± 1%± 1%± 1%± 1%Rated Current50A40A29A23A14.6A13A7.3ACurrent Range0-50A0-40A0-29A0-23A0-14.6A0-13A0-7.3ARipple&Noise(Max.)150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p200mVp-p240mVp-pLine Regulation± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%Load Regulation± 1%± 1%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%Rated Power250W300W348W348W350.4W351W350.4WRated Power74%79%74%78%83%83%84%Voltage Adjust Range4.5-5.6V6-9V10-13.2V13.5-18V20-26.4V26-32V41-56VVoltage Range90~132VAC/180-264VAC 47~63Hz;255~370VDC AC Current4.5A/115V 2.5A/230V Inrush Current(Max.)25A/115V 50A/230V Leakage Current Condition: New, Country/Region of Manufacture: China, Rated Current per Phase: 4.2A, Current Type: DC, Wiring Configuration: 4-Wire Bipolar, Insulation Class: B (Max 130°C), MPN: Does not apply, Full Step Angle: 1.8° (200 Steps), Shaft Diameter: 8MM, Unit Type: kg, Holding Torque: 425oz-in, Brand: WANTAI, Base RPM: 500RPM

PicClick Insights PicClick Exclusive
  •  Popularity - 3.230 views, 3.2 views per day, 1.001 days on eBay. Super high amount of views. 12 sold, 8 available.
  •  Price -
  •  Seller - 1.082+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Similar Items