EU SHIP 4Axis Nema 23stepper motor 425oz-in 3A dualshaft+driver 18-50v cnc kit

EUR 216,74 Buy It Now 20d 1h, FREE Shipping, 14-Day Returns, Pay with PayPal and you're fully protected.

Seller: wantmotor111 (1.169) 96%, Location: Amstel dam, Ships to: Europe, Asia, US, CA, AU, Item: 223524920894 Welcome to my Store! Great News from Wantaimotor! Ship from EU &United Stateswarehouse to European Union Customers!No taxes from customs, no damage, better service, please don't hesitate! Free Ship byUPS& DHL! The item includes: 4PCS Nema 23 Stepper Motors 57BYGH115-003B Dual Shaft 3.0A 425oz-in4PCS stepper motor drivers DQ542MA 4.2A 50VDC 125Microsteps2PCS power supply 350W 36V1PC brekout board&cable as free gifts 1 stepper motorElectrical Specifications : ModelStep angle( °)Motor LengthL(mm)Rate Voltage(V)Rate Current(A)Phase Resistance(Ω)Phase Inductance(mH)Holding Torque(kg.cm)Lead Wire(NO.)Rotor Inertia(g.cm2)Motor Weight(kg)57BYGH115-003B1.81126.332.193048001.9Connection wring wayBlack ------A+Green------A-Red---------B+Blue--------B- 2. Stepper Motor Driver DQ542MA DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DQ542MA runs under high speed, is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on.Features:l High performance, low pricel Average current control, 2-phase sinusoidal output current drivel Supply voltage from 18VDC to 50VDCl Opto-isolated signal I/Ol Overvoltage, under voltage, overcurrent, phase short circuit protectionl 15 channels subdivision and automatic idle-current reductionl 8 channels output phase current settingl Offline command input terminall Motor torque is related to speed, but not related to step/revolutionl High start speed High holding torque under high speedElectrical specification:Input voltage18-50VDCInput current< 4AOutput current1.0A~4.2AConsumptionConsumption:80W; Internal Insurance:6ATemperatureWorking Temperature -10~45℃;Stocking temperature -40℃~70℃HumidityNot condensation, no water dropletsgasProhibition of combustible gases and conductive dustweight300GS3.POWER SUPPLY 350W 36V350W Single Output Switching Power SupplyAC input range selected by switch.Protections:short circuit/overload/over voltage/over temperature 100% full load burn-in test Low cost,high reliability 1 year warranty Size: 215*115*50mmWeight:1.05kgAC input voltage range: 90~132VAC/180~264VACAC inrush current: cold start 25A/115V,50A/230VDC adjustment range:±10% rated output voltageOverload protection:105%~135%, hiccup mode, auto recoverySetup,rise,hold up time: 200ms,50ms,20ms/230VAC at full loadWorking temperature and humidity:-10℃~+60℃;20%~90 %RHModelDC output voltage,Current rangeVoltage toleranceRipple&NoiseEfficiencyS-350-3636V,0~9.7A±1%150mV83% 4. Breakout Board Set pins according to software as follows: Output pin: P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17. l P2 – X axis Pulse, P3 – X axis Direction l P4 – Y axis Pulse, P5 - Y axis Direction l P6 – Z axis Pulse, P7 – Z axis Direction l P8 - A axis Pulse, P9 - A axis Direction l P14 - B axis Pulse, P1- B axis Direction l P16 - C axis Pulse, P17- C axis Direction Input pin: P10 ,P11, P12, P13, P15 Set them for Emergency Stop and X Y Z Limit switch Condition: New, Country/Region of Manufacture: China, Rated Current per Phase: 3a, Current Type: DC, Wiring Configuration: 4-Wire Bipolar, Type: Stepper Motor, Insulation Class: F (Max 155°C), MPN: Does Not Apply, Full Step Angle: 1.8° (200 Steps), Shaft Diameter: 8mm, Unit Type: kg, IP Rating: IP54, Holding Torque: 3N.M, Brand: wantai motor, Nominal Rated Input Voltage: 48 V, Base RPM: 500RPM

PicClick Insights PicClick Exclusive
  •  Popularity - 2.309 views, 7.3 views per day, 316 days on eBay. Super high amount of views. 18 sold, 18 available.
  •  Price -
  •  Seller - 1.169+ items sold. 4% negative feedback. Good seller with good positive feedback and good amount of ratings.
Similar Items