Stainless steel operation head and speed controller.
Digital display.
Speed controller applies IC speed detection -the constant power speed regulation technology, which offers effective compensation for the speed variation due to Variation of load and power supply voltage fluctuation.
Specifications:
Model
AD200L-H
Rated voltage
220±10% VAC
Rated frequency
50/60 Hz
Input power
280W
Output power
200W
Rated torque
68 N·cm
Work mode
S2-5 min (interrupted)
Speed control
Yes
Speed range
5000~23000 rpm
Dynamic detection speed
Yes
Speed memory function
Yes
Overload protection function
Yes
Speed display
×10 rpm LED
Timing control range
1~ 1000 min
Work head maximum torque
65 N.cm
Work head Material
stainless steel 304#
Bearing material
PTFE
Standard configuration
12G, 18G
Permissible ambient temperature
Lower than 40°C
Permissible relative humidity
Less than 90%
Size of the mixer (T x B x H)
215×310×720 mm
Product Weight
8.3 kg
Work head parameter
Work head Model
12 G
18 G
Mixing capacity (H2 O) ml
30~800
50~1500
Mixing processing viscosity (cp)
1000
2000
Rotor maximum linear velocity (m/s)
11
15
Work head Immersed in liquid height (mm)
25/85
30/120
Work head Diameter (mm)
12
18
Work head length (mm)
150
190
Permissible ambient temperature (°C)
120
120
Attention:
To protect the electrical motor, please do not run the mixer over 20 minutes consecutively for each use.
Please ensure the motor cools down completely after each use and before the next use; otherwise, the motor may be damaged.
Idling may damage the machine. Please place the operating head in the liquid before use. Then turn on the machine, and rotate the speed adjusting knob rightward slowly.
Wed, 06 Dec 2023 09:33:35 GMT 638374808156714154 0700738A5C161B1B