Package: (As the picture show) 1x Dent Lift Puller 1x Bridge Shape Puller(with 6 Tabs) 1x 2 in 1 T-Shape Puller 37x Pulling Tabs 1x Glue Gun 10x Glue Sticks 1x Rubber Hammer 1x Tap Down Heads with 4 tabs 1x Reflex Board 1x Empty Alcohol Bottle 1x Cleaning Cloth 1x Plastic Shovel 1x Manual 1x Nylon Bag 10x Dent Repair Rods |
----10pc Steel Rods (5pc Black + 5pc Blue) How to use Steel Rods? Please click the video👆👆 | |
| |
Steps for usage: 1. Clean the surface with a clean damp cloth. 2. connect the power source and use the glue stick to andpreheat for 5-10 minutes. 3. According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks. 4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. 5. After the glue cooling, use a black dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear. 6. After finishing the dent, use the 95% alcohol to clean the residual glue which on the car surface with plastic shovel. |