CNC Kit 4 Axis Breakout Board & Nema23 Stepper Motor For DIY Router/Mill/Plasma

£418.99 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: sthnice ✉️ (464) 100%, Location: MIDDLESEX , GB, Ships to: EUROPE & many other countries, Item: 143349212242 CNC Kit 4 Axis Breakout Board & Nema23 Stepper Motor For DIY Router/Mill/Plasma. /7

Description

Specification

Content

Service

VAT

Terms & Conditions

ENGMATE™ 4 Axis Kit for CNC DIY

1*5 Axis Breakout Board +4*EMA2-050D56 Microstep Motor Drivers + 4*EMA232-7630S4 Nema 23 278oz-in (1.96N.m) Stepper Motors + 1*36V 15A Switching Power Supply

The 5 axis breakout board in this kit is specially designed for CNC single axis stepper driver controller(maximum 5 pcs can be connected) in the market, such as ENGMATE™ series, M542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A), DM860(A) etc.. It can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.

The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.

In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. Please purchase this kit with confidence.

5 Axis Breakout Board

  • " Upgraded circuit, work more peacefully and steady than the previous version
  • " Maximum support 5-axis stepper motor driver controllers
  • " 2 ways to get power: 5V DC power supply or USB port to get power from PC directly
  • " 2-stage signal processing, smooth signal transmission, powerful anti-jamming
  • " 5-input interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc.
  • " Relay output control interface , accessed by the spindle motor or the air pump, water pump, etc.
  • " 5-axis work LED display , visually display the working condition of the stepper driver controller
  • " The 5th axis (B axis) on the breakout board can be used as a PWM signal output interface for controlling frequency inverter via software (e.g. Mach3 etc.) to adjust speed of main spindle
  • " Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software , etc.

Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board.

Digital Hybrid Microstepping Driver (EMA2-050D56 )

  • " Extra-low motor noise offers excellent quietness
  • " Supply voltage from 24-50V  DC
  • " Output current programmable, with 7 stalls output current setting , from 2.1-5.6A(Peak)
  • " Adoption of 32-bit DSP, pure sine wave subdivision technology
  • " Low-noise, low-vibration and low temperature rising.
  • " Microstep resolutions programmable, with 15 stalls microstep subdivision setting
  • " Automatic Half Current, motor wires miconnected protection
  • " Internal optical isolation, pulse input frequency up to 200KHz
  • " Support PUL/DIR mode
  • " Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged
  • " Suitable for 2-phase and 4-phase Hybrid stepper motors

Hybrid Stepper Motor (EMA232-7630S4 )

  • " High torque, more smooth movement
  • " High efficiency, energy-saving, low noise and low vibration
  • " High start torque, low start current and reliable performance
  • " Simple 4 wires ensure easier wiring, installation and maintenance

36V 15A Switching Power Supply

  • " High efficiency, high reliability, low cost
  • " ±10% output voltage adjustable
  • " PWM control and regulation, insure the steady and precise output voltage
  • " Over-temperature protection: built-in a powerful fan for cooling. Power on, fan on. RTH3≥85°C, output shutdown
  • " Built-in EMI filter
  • " 100% full load burn-in test
  • " Over current, over voltage, short circuit
  • " Low output ripple and yawp

Common-cathode Connection

Applications

Suitable for a variety of small sized automation equipment and instruments.
  • " For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc..
  • " For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc..
Matching Stepper Motors
Model NO. Min Motor Size Max Motor Size Recommended Supply Voltage Recommended ENGMATE Stepper Motors
EMA2-040D15 NEMA 8 NEMA 17 24V DC EMA112-4506S4, EMA162-3805S4
EMA2-040D22 NEMA 8 NEMA 17 24V DC EMA082-4208S4, EMA142-4520S4
EMA2-050D42 NEMA 17 NEMA 23 24V/36V DC EMA172-6015S4, EMA232-5615S4
EMA2-050D56 NEMA 23 NEMA 34 36V DC EMA232-7630S4, EMA232-11235S4
EMA2-070D56 NEMA 23 NEMA 34 48V DC EMA242-8840S4, EMA342-7842S4
EMA2-080D72 NEMA 23 NEMA 34 60V DC EMA342-10050S4, EMA342-15662S4
EMA2-080A72 NEMA 34 NEMA 42 80V DC EMA422-15065S4
EMA2-220A80 NEMA 34 NEMA 52 110V/220V AC EMA422-20180S4
Electrical Properties of 5 Axis Breakout Board(ambient temperature Tj = 25°C)
Input Voltage 5V DC via power adapter or directly get power from PC via USB port
Drive Type Pulse   Direction   Enable Signal Control
Suitable Microstep Driver 2 Phase, 3 Phase, 4 Phase Microstep Driver (EMA2-050D42/EMA2-070D56/EMA2-080D72/EMA2-220A80 etc.)
Net Weight Approx 80g
Dimension 90*82*15mm (L*W*H)
Technique Parameter for EMA2-050D56 Stepper Driver Hybrid Stepper Motor
Model NO. EMA2-050D56
Input Voltage 24-50V DC
Output Current 2.1A-5.6A(Peak)
Pulse Input Frequency 200KHz
Cooling Method Natural Cooling or Fan Forced cooling
Environment Avoid dust, oil fog, corrosive gas
Ambient Temperature 0°C~50°C (32°F~122°F)
Operating Temperature 70°C (158°F) Max
Storage Temperature -20°C~65°C (-4°F~149°F)
Humidity 40%RH-90%RH
Dimension(WxHxD) 118×75×32mm
Weight 280g
Suitable Motor Nema 23, Nema 34
EMA232-7630S4 Nema23 Stepper Motor
Model NO. EMA232-7630S4
Motor Type 2-Phase
Step Angle (°) 1.8
Rated Voltage (V) 2.7
Rated Current (A) 3
Phase Resistance (Ω) 0.9
Phase Inductance (mH) 3.5
Holding Torque (N.m/oz-in) 1.96/278
Rotor Inertia (g.cm²) 480
Motor Length (mm/in.) 76/2.99
Frame Size (mm/in.) 57/2.24
Lead No. 4
Shaft Single
Motor Weight (kg) 1
540W 36V 15A Switching Power Supply 110/220V Switchable
Output Voltage 36V
Output Voltage Tolerance ±1%
Rated Output Current 15A
Output Current Range 0-15A
Output Voltage Adjustment Range ±10%
Output Power 540W
Input Voltage Range 110VAC/220VAC±20%(selected by switch)
Input Frequency 47~63Hz
Input Current 10A/115VAC,5.0A/230VAC
Efficiency 85%
Inrush Current 25A/115VAC, 50A/230VAC
Leakage Current <3.5mA/240VAC
Over Load Protection 115%~135% hiccup mode, auto-recovery
Over-voltage Protection 42.6~44.2V hiccup mode, auto-recovery
Over-temperature Protection Power on, fan on. RTH3≥85°C, output shutdown
Working Temperature and Humidity -10°C~ 60°C, 20%~90%RH
Storage Temperature and Humidity -20°C~ 85°C, 10%~95%RH
Antiknock Characteristic 10-500Hz, 2G, 10min./period, duration 60mins
Withstand Voltage I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC
Insulation Resistance 100M ohms/500VDC
Safety Standards UL1012
EMC Standards EN55022, Class A
Weight 1350g
{{{TBR_ITEM_Service}}}

UK Business Customer

Purchasing goods for your own business and realize that a VAT invoice is a must for claiming back input tax to finally reduce cost? Or ordering for use of your employer and find out the Accounting Department always require a VAT invoice for reimbursement?

No more hassle. Just contact us for a FULL VAT INVOICE within 30 days of payment. Invoice will be provided in electronic format.

EU Business Customer

If you are VAT registered in any EU countries, your order could be processed as UK VAT EXEMPT. Please contact us with the following information to obtain tax-free price.

* EU VAT registration number and registered address

* Shipping Address (if different from the registered address)

UK&EU Individual Customer (non-VAT registered)

Invoice is also available upon request. Invoice will be billed to shipping address unless otherwise instructed.

Estimated Delivery Time
Country/Region Standard (Business Days) Express (Business Days) Attentions
UK 2-4 1-2
Your order will be dispatched within 1 working day after cleared payment while stock lasts.
Shipment notification is available via eBay message or email once order is dispatched.
The stated delivery time is not guaranteed since it depends on logistics' performance. However, 95% parcels will be delivered within the reference time. Please contact us if there is delivery delay.
Other Western Europe Countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland 3-7 2-4
Other Countries & Districts (May depart from other stock location) 15-25 varying
Estimated Delivery Time
Country/Region Service Estimated Delivery (Business Days) Remarks
USA (excl. Alaska, Hawaii, Puerto Rico) USPS First-Class Package /UPS SurePost/UPS Ground 3-7
Your order will be dispatched within 1 working day after cleared payment while stock lasts.
Shipment notification is available via eBay message or email once order is dispatched.
The stated delivery time is not guaranteed since it depends on logistics' performance. However, 95% parcels will be delivered within the reference time. Please contact us if there is delivery delay.
Other Countries (May depart from other stock location) International Airmail Service 12-21
Estimated Delivery Time
Country/Region Service Estimated Delivery (Business Days) Remarks
Australia (NSW) Australia Post 2-3
Your order will be dispatched within 1 working day after cleared payment while stock lasts.
Shipment notification is available via eBay message or email once order is dispatched.
The stated delivery time is not guaranteed since it depends on logistics' performance. However, 95% parcels will be delivered within the reference time. Please contact us if there is delivery delay.
Australia (VIC,SA,QLD,NT) Australia Post 4-6
Australia (WA,TAS) Australia Post 6-8
New Zealand Australia Post 6-9
Other Countries (May depart from other stock location) International Airmail Service 12-21
Geschätzte Lieferzeit
Land/Region Bedienung Geschätzte Lieferzeit (Werktage) Bemerkungen
Deutschland Deutsche Post, DHL oder Hermens 2-4
Wenn Sie die besondere Anforderung haben, kontaktieren Sie und bestätigen Sie bitte mit uns vor Bestellung. z.B.
Anforderung, die Ware dringend bekommen.
Anforderung, dass die Ware aus einem bestimmten Ort geliefert werden.
Anforderung, dass die Ware innerhalb einer bestimmten Zeit geliefert werden.
Für weitere Fragen/Anforderung über die Lieferung.
EU-Länder Deutsche Post, DHL oder Hermens 3-8
Andere Länder (Vielleicht Schiff aus anderen Lagerort) Unterschiedlich Unterschiedlich
  • Ihre bestellte Ware wird am nächsten Werktag nach dem vollständigen Bezahlung verschickt liefern, wenn die Ware vorrätig ist.
  • Die Benachrichtigung wird gesendet, nachdem Ihre Bestellung versandt wird. Überprüfen Sie bitte bei Ihrer E-Mail oder eBay die Nachricht für das Versanddatum.
  • Alle Pakete werden per Luftpost versendet. Es ist nicht garantiert, dass alle Pakete innerhalb der oben genannten Lieferzeit ankommen. Allerdings werden 95%     Pakete innerhalb der Referenzzeit geliefert.
  • Es ist unmöglich, die Sendung der Luftpost im Internet zu verfolgen. Wir helfen Ihnen, wenn Sie das Problem mit der Sendungsverfolgung haben.
  • PayPal is secure and easy payment method on eBay.
  • PayPal accepts payment by balance, credit card, debit card or checks securely with NO surcharge.
  • As PayPal verified business seller, we prefer PayPal payment and use PayPal address for delivery.
Money Back Warranty Replacement
We accept return & refund if you are not satisfied with our product within 30 days. We provide 1 year warranty from date of purchase and offer satifying solutions upon your warranty issue. We accept free replacement if you receive a not-as-described(defective, incorrect, parts missing) product.
  • Condition: New
  • Lead No.: 4
  • Shaft: Single
  • Stepper Motor: EMA232-7630S4
  • Step Angle (°): 1.8
  • Output Current: 2.1A-5.6A(Peak)
  • Suitable Motor: Nema 23, Nema 34
  • Model NO.: EMA2-050D56
  • Input Voltage: 24-50V DC
  • Rated Current (A): 3
  • Holding Torque (N.m/oz-in): 1.96/278
  • Brand: ENGMATE

PicClick Insights - CNC Kit 4 Axis Breakout Board & Nema23 Stepper Motor For DIY Router/Mill/Plasma PicClick Exclusive

  •  Popularity - 20 watchers, 0.0 new watchers per day, 1,697 days for sale on eBay. Super high amount watching. 3 sold, 1 available.
  •  Best Price -
  •  Seller - 464+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive