4-Axis 6090 CNC Engraver Router & Remote control Machine VFD USB Port Type 1500W

£2,155.02 Buy It Now or Best Offer, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: rongbiglist ✉️ (1,029) 98.9%, Location: Burton on Trent,East Staffordshire, GB, Ships to: GB, Item: 395298352915 4-Axis 6090 CNC Engraver Router & Remote control Machine VFD USB Port Type 1500W.

CNC Router engraving machine parameters: Model: CNC6090GZ Outside dimension:1150*970*650mm(L*W*H) Working platform size:1045*720mm(L*W) Frame Material:The whole machine used 6061 aluminum profiles Max. Feeding height:≤140mm(From base of Z axis to platform) X,Y,Z Working Area:900(Y)*600(X)*140mm(Z) Sliding unit: X axis:SFU1605 Ball Screws Y axis:SFU1605 Ball Screws Z axis:SFU1204 Ball Screws Drive unit: X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails Z axis: ø12 high-strength round rail Stepping motor:57 two-phase 3A (with handwheels) Driving Power for Stepping motor:AC220, 240W, out put:DC24V10A Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings)
4-Axis 6090 CNC Engraver Router & Remote control Machine VFD USB Port Type 1500W Description  
superhomeshop20188    
  Description: CNC Router engraving machine parameters: Model: CNC6090GZ
Outside dimension: 1150*970*650mm(L*W*H)
Working platform size: 1045*720mm(L*W)
Frame Material:The whole machine used 6061 aluminum profiles
Max. Feeding height: ≤140mm(From base of Z axis to platform)
X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z)
  Sliding unit: X axis:SFU1605 Ball Screws
Y axis:SFU1605 Ball Screws
Z axis:SFU1204 Ball Screws
  Drive unit: X axis: ø20 High intensity round rail,
Y axis: SBRø20 high-strength aluminum base rails
Z axis: ø12 high-strength round rail

Stepping motor: 57 two-phase 3A (with handwheels)
Driving Power for Stepping motor: AC220, 240W, out put: DC24V, 10A
Maximum Idle speed: 1500mm/min
Working Speed: 50-1500mm / min (different material with different speed settings)
Spindle motor: 1500W high-speed variable frequency spindle motor , ER11 chuck, with 6mm collet.
  1,Water cooled spindle motor can work longer time than air cooled motor. 2,Water cooled spindle motor has higher stability and better concentricity than air cooled motor.

(tips:1. The spindle motor must connect with the VFD. 2. It cannot directly connect with the supply voltage (AC220V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)

Drive of Stepping motor: 0-3.5A adjustable four-axis drive
(TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision)
Repositioning precision: ≤0.05mm
Cooling: Water-cooling
Speed: 0-24000r/m
Spindle precision: Radial runout ≤ 0.03mm
Carving command: G code / TAB file / nc file / NCC file
VFD: AC220V, 1500W, 0-400Hz (built-in control box)
    USB Control box parameters Protection: Emergency stop button
Communication interface: through USB PORT connect with computer
Software environment: Windows XP / win7 with 32 bit (proper computer system makes the software run, otherwise it will not work)
Input Volts: AC220V
    Application industry:
Woodworking industry: sculpture, round carving, wooden handicraft processing
Advertising industry: advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products
Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet.
About software: Friendly reminder: The engraver will come with  software(Free Version , if you followed the installation tips offered by us, it works like full version.)   tips: The software perform better on the Windows XP/Windows 7 and 32 bits system computer, it will not work on Win 8/10 and 64 bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regards the CNC software is virus and stop the installation.   PS: Please don't update the software when installed, then it will not need the license Numbers. Free Version means---Free version does not have the copyright but the function is same with the genuine version.
      Feature: 1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2. water cooling spindle works more stable and durable. 3. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle.         How to use: 1. Assembling and locating the CNC machine on steady desk well.   2. Make sure that your computer has a USB port output. 3. Place the control box in a ventilated dry place where there is no dust, no moisture 4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. 5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller. 6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. 7. Installing a CNC control software  8. Fllowing our manual or guideline to set uo the software. 9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. 10. You can enjoy making you dream with using our CNC machine now.
 

CNC SOFTWARE HANDWHEEL

Description:

Industrial Mach CNC engraving machine controller was designed for Mach system

Do not need to install any software and driver, Spring can be stretched to 3 meters

Waterproof design, very durable, anti-dirt, oil spray

Power by USB port

Dimensions: 22 x 8 x 3cm

Please note this item works with Mach 3 ONLY

The usb self-check light, you can type the " scroll" on the keyboard to activate it.

Directional motion control: X+,X-,Y+,Y-,Z+,Z-,A+,A-

Feed rate control: F+,F-

Jog rate: J+,J-

Spindle speed: speed up, slow down

Programming: E-stop,cycle start,spindle on/off,Redo,single step,original point

 


 

Package Include

1 * Remote controller

1 * Cable

PaymentDelivery detailsFeedbackReturn policyContact usPayment   We accept PayPal and bank transfer. All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. We accept Credit Cards via PayPal. Delivery details   4-9 working days to: UK by DHL 5-7 working days to: France ,Germany ,spain ,Italy 6-10 working days to: Other countries     Feedback   We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!   Return policy    Please keep the original box or packaging within 15days since item received. Returned item must come with original box or packaging. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item. c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid. Thank you.   Contact us
  • Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
  • Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
  • Please contact us with ebay message.
  • Please feel free to contact us if you have any questions.
    
FeaturesHigh quality W/ warranty!, Long service life, Compact Design,Unique Appearance,high reliability
WarrantyThree years
HighlightsFast shipping, Durable material, Long service life
Features:Nice and Practical, High Quality Packaging
* Feature *Creative Design,Durable Material,Beautiful Appearance
Stepping motor57 two-phase 3A (with handwheels)
Spindle motor1500W high-speed variable frequency spindle motor
Spindle speed:24000 rpm
Principal axis collet:ER11 chuck, with 6mm collet.
ModelCNC ROUTER ENGRAVING MACHINE
Machine Type4 Axis Router Machine
CoolingWater-cooling
Working platform size1045*720mm(L*W)
Power SourceElectric
Outside dimension1150*970*650mm(L*W*H)
Frame MaterialThe whole machine used 6061 aluminum profiles
Maximum Idle speed0-1500mm/min
Working Speed50-1500mm / min
Repositioning precision≤0.05mm
Carving commandG code / TAB file / nc file / NCC file
Recommend softwareInstallment Software, EMC2
Communication interfacethrough USB PORT connect with computer
MPNDoes not apply
Software environmentWindows XP / win7 with 32 bit
X,Y,Z Working Area900(Y)*600(X)*140mm(Z)
Max. Feeding height≤140mm(From base of Z axis to platform)
BrandUnbranded/Generic
ControlCNC
SHOPsuperhomeshop20188
EANDoes not apply
UPCDoes not apply
  • Condition: New
  • Features: High quality W/ warranty!, Long service life, Compact Design,Unique Appearance,high reliability
  • Warranty: Three years
  • Highlights: Fast shipping, Durable material, Long service life
  • Features:: Nice and Practical, High Quality Packaging
  • * Feature *: Creative Design,Durable Material,Beautiful Appearance
  • Stepping motor: 57 two-phase 3A (with handwheels)
  • Spindle motor: 1500W high-speed variable frequency spindle motor
  • Spindle speed:: 24000 rpm
  • Principal axis collet:: ER11 chuck, with 6mm collet.
  • Model: CNC ROUTER ENGRAVING MACHINE
  • Machine Type: 4 Axis Router Machine
  • Cooling: Water-cooling
  • Working platform size: 1045*720mm(L*W)
  • Power Source: Electric
  • Outside dimension: 1150*970*650mm(L*W*H)
  • Frame Material: The whole machine used 6061 aluminum profiles
  • Maximum Idle speed: 0-1500mm/min
  • Working Speed: 50-1500mm / min
  • Repositioning precision: ≤0.05mm
  • Carving command: G code / TAB file / nc file / NCC file
  • Recommend software: Installment Software, EMC2
  • Communication interface: through USB PORT connect with computer
  • Software environment: Windows XP / win7 with 32 bit
  • X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z)
  • Max. Feeding height: ≤140mm(From base of Z axis to platform)
  • Brand: Unbranded/Generic
  • Control: CNC
  • SHOP: superhomeshop20188

PicClick Insights - 4-Axis 6090 CNC Engraver Router & Remote control Machine VFD USB Port Type 1500W PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 3 days for sale on eBay. 0 sold, 6 available.
  •  Best Price -
  •  Seller - 1,029+ items sold. 1.1% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive