Antique Japy one-piece bell striking carriage clock c. 1860 - overhauled 05/19

EUR 1.641,09 Buy It Now or Best Offer 21d 4h, EUR 175,05 Shipping, 14-Day Returns, Pay with PayPal and you're fully protected.

Seller: crahanfarm (91) 100%, Location: Westbury, Ships to: Worldwide, Item: 113780014180 Foreword This is an antique one-piece case (circa 1860), bell-striking French carriage clock by the famous clockmaker – Japy Frères, as is evidenced by the clockmaker’s trademark being stamped into the lower quarter centre of the black-plate.Please look carefully at the description and pictures, as they all form an integral part of this sale. WarrantyThe clock is warrantied against operational defects for twelve months from the date of dispatch with the buyer being responsible for any/all transport costs to and from base. The warranty does not cover damage caused by negligence, from the clock being mishandled, tampered with or dropped, courier mishandling/damage, or from it being given to another clockmaker for adjustment and/or repair. Japy Freres “potted” biography The company founder was Frédéric Japy (1749 1812). His company was based in Badevel and initially produced basic watch movements. The company grew to become the most singularly important watch/clockmaking organization in France, with offices in Badevel, Beaucourt and Paris. He was particularly important in the development of hour and quarter repeater carriage clocks as well as calendar works etc. Possibly the greatest accolade he was paid was winning the Gold Medal of Honour in the 1855 exhibition. His company grew to be very diverse, even to the extent that the first petrol engine to be in a Peugeot vehicle was made by Japy! About the clock When acquired, the clock had obviously been put aside for many years and was in quite a neglected state. Despite its condition, after restoration, it has come back to life and in good condition. Its height with handle raised of 6½ inches makes it - later referred to - a “Calibre No.2” - the middle of the three largest so-called “full-sized” carriage clocks. The face is of the classic white “enamel-on-copper” construction. The Roman numerals are in excellent condition, as is the chapter ring and the blued-steel Breguet (or moon) style hands. Overall, the case is in excellent condition, other than previous work having been carried out on the case’s top rail (the right side – see picture), which has left a small area of missing brass. There are also a few small marks elsewhere on the case, but nothing other than one should expect from such an aged clock, being somewhere around 160 years old. The clock comes with a new 3.5mm correctly fitting double-ended key. The movement strikes once on the half-hour and the number of hours on the hour on a very sweet-sounding spun chromed bell. Statistics: · Width - including base platform – 9.4 cms. · Depth - including base platform – 8.3 cms. · Height - including base platform – 13.1 cms. and with handle raised – 16.3 cms. · Weight – 1.41 Kgs., or, 3lbs 2 ozs. The movement... is stamped as follows: · the Japy Frères trademark on the back of the back plate in an oval, cited as being awarded the “Grand Medaille d’Honneur” in 1855. · 395 – inside of the back plate – bottom centre. · 395 – back of the front plate. The movement was carefully dismantled to component level and the following procedures were carried out: 1. all components cleaned ultrasonically in a horological cleansing solution; washed, rinsed and heater dried. 2. Wheels, arbors, leaves, levers, springs, rack, snail, pinions and pivots all checked for alignment and wear – none found. 3. Pivots polished on clockmaker’s lathe. 4. Movement plates examined and pivot holes/bearings checked for wear – (possible distortion, usually due to mechanical pressure, lack of servicing, or simply age-related wear) - none found. 5. Pivot holes pegged out to remove all remaining debris (a “paste” of old/dried oil). 6. The mainspring (the clock’s “muscle”) and strike barrels were dismantled, their springs removed and checked for wear (none found). Both springs are in excellent condition., with the mainspring having a working “Geneva stop-work” – see NOTE later. They were cleaned, lightly greased and re-fitted into their respective barrels. 7. All components de-greased in isopropyl alcohol and then brush-polished with French chalk, which also helps to delay tarnishing, a natural brass occurrence. 8. Movement re-assembled - all arbors checked for “end shake”. 9. Contrate cock adjusted for correct depthing between the contrate wheel and escape pinion. 10. All sinks oiled with high-grade Moebius clock oil. NOTE: “Stop works” - were generally fitted to the higher quality carriage clocks. This device stops the mainspring from being fully wound and becoming fully unwound. Springs deliver maximum power when wound and gradually lose power towards the end of the run-down. The “stop work” ensures that the power delivered to the going train by the mainspring is quite constant – therefore aiding timekeeping. Naturally, it also stops the mainspring from being over-wound. As this clock has a working “stop work”, it does need winding every seven days. The platform... is the clock’s “heartbeat”. It “manages” the power generated by the mainspring through the going train – controlling the clock’s timekeeping ad is also the most delicate assembly. This is a very simple and good brass platform with an off-set club-toothed ratchet lever, individual cocks and timing screws on a steel balance wheel (typical of Japy) and in perfect working order. The following procedures were carried out: 1. platform dismantled and all components (other than the hairspring), were cleaned in a 4-stage automatic watch component cleaning machine. 2. The hairspring was cleaned in an oil-based cleaner. No rust was present anywhere on the spring. 3. Platform polished with French chalk. 4. Jewels checked for wear - pegged out and cleaned as appropriate. 5. Balance wheel, impulse jewel, fork and pallets cleaned; staff, pivots and all jewels checked for wear. 6. Escape wheel, pinion, leaves and index all cleaned and checked for wear. 7. Components de-greased in isopropyl alcohol. 8. Platform reassembled, oiled with high grade watch oil, powered and timed to 18,000 beats/hr., and beat-adjusted. Once adjusted and timed, the platform now produces an even beat, a very positive action with good amplitude and the hairspring “breathing” correctly within the index. Like the rest of this clock, it is now in pristine condition. The faceplate, dial and hands... are all in excellent condition, with the classic white enamel-on-copper face, Roman numerals and chapter ring, having no cracks, hairlines or missing enamel. The Roman numerals and chapter ring are very delicately inked – typical of the period – and in excellent condition - as are the condition of the delicate blued steel Breguet (or moon) hands. The movement, dial, false plate and hands were re-assembled and powered while the case was being overhauled. The case... is a one-piece brass case, being made of highly reflective brass. As mentioned earlier, there is one area to the case where previous work has been carried out. There is a small piece of brass missing from the top rail when viewed from the right (see picture) and no attempt has been made to repair this area. The number 295 is stamped into underside of the base platform, as are the initials “H.A.”. The number “9” is stamped into the top side of the base platform. The case was dismantled to component level and the following procedures carried out: 1. parts soaked for 24 hours in a warm solution of horological cleanser, washed, rinsed and heater dried. 2. All case components were then cleaned with a metal burnishing paste – used by museums. 3. They were then dipped in isopropyl alcohol for de-greasing. 4. Once dried, two coats of horological lacquer were applied, followed by a coat of Renaissance wax for handling protection. 5. Other than the front glass, all the 4mm bevelled glass panels and platform viewing window were replaced during overhaul, as they were all quite badly damaged. They do not rattle when in situ - due to their perfect fit. 6. Case re-assembled. As the case has been cleaned, lacquered and waxed, it will now need no further attention other than careful dusting. Microfibre cloths are excellent for this. Under no circumstances should any silicon-based or metal polishes come anywhere near the clock. Testing... was carried out once the movement was reinstalled into its case and powered. It has now been run for four full rundowns without any issues, keeping near-perfect time throughout.Please note: the index’s regulator arm is very close to the centre of its operational arc, which is where it should be after a complete overhaul and regulation. Payment... is acceptable in any form of cleared funds prior to shipment, such as bank transfer (BACS), cash, postal order, personal cheque or PayPal. PLEASE NOTE: should personal collection be required, then the transaction must be completed in cash or previously cleared funds at the point of collection. Shipping... will take place within one working day of receipt of cleared payment. However, every effort is made to ship on the same day. UK delivery - the clock will be shipped via Royal Mail on its ‘Next day 1pm, fully insured, tracked and signed for’ delivery service, except for Saturday afternoons, Sundays and English Bank Holidays. Delivery price is a direct reflection of the consignment’s gross weight, value, packaging and delivery to the Post Office. Export customers – please contact me for precise delivery costs. Export shipping is also always carried out on a tracked, signed-for and fully insured basis (the price shown is for delivery to world zone 2). Any/all destination Customs and/or import duties and/or related taxes are the exclusive and sole responsibility of the buyer. This is an express condition of an export sale. Conclusion This is quite an early, good quality bell-striking, one-piece brass-cased carriage clock, made by the respected clockmaker Japy Frères. Following a complete and sensitive overhaul, it is now in excellent condition throughout, which has brought it back to being in good condition, both visually and operationally. This clock should be serviced every five years by a competent clockmaker to ensure optimum performance, as this is the working life of good quality clock/watch oil. Should you have any additional questions, please don't hesitate to ask - I'll be happy to help. A user guide is supplied as is the signed restoration report. Thank you for looking Track Page Views WithAuctiva's FREE Counter Condition: Following restoration and movement overhaul, this clock, approaching 120 years of age, is now is good running order and keeps excellent time. It comes with its base plate (or modesty cover) and a new, correctly fitting double-ended key.The case does have one small area of missing brass - see picture 3.A 12 month warranty form dispatch date is included., Age: Antique - pre 1900 - circa 1860/65, Material: Brass, Type: Carriage clock, Features: 8-Day, Sub-Type: One-piece bell striker, Clock Type: Mantel/ Carriage Clock, Style/ Origin/ Theme: French

PicClick Insights PicClick Exclusive
  •  Popularity - 298 views, 4.2 views per day, 71 days on eBay. Super high amount of views. 0 sold, 1 available.
  •  Price -
  •  Seller - 91+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Similar Items