Seller: clocks-uk✉️(9,953)99.8%,
Location:Herne Bay, Kent, GB,
Ships to: GB,
Item:293114089939Clock HANDS Pointers Fingers for UTS quartz clock, Holes 5mm & 2.8x3.5mm EUROFIT. Clock hands fingers pointers black silver goldQuartz hands for European-style quartz clocks (these type of hands are also described as Euro-Fit or Euroshaft hands) Movements that are likely to use these hands: UTS, Hechinger, Hermle, Junghans, Kienzle, EL, etc. Description of Euro-Fit hands ... (please see the illustrative image ): A) The hour-hand is push-on and it fits the spindle of 4.95mm diameter B) The minute-hand's fitting-hole is totally flat and rectangular/oval in shape, 2.8x3.5mm. It is NOT push-on, it is secured to the mechanism by a small nut that fits the brass threaded spindle. Please do not confuse these hands with the Chinese "I" shaft ones, which are very similar The LENGTH of the hands is defined by the length of the minute-hand alone. Because BATON HANDS are straight, it is normal practice to cut them to the size required Any hands with a length over 150mm would usually require a high-torque movement. Small Advice: Due to production tolerances, occasionally you may find that the hour-hand is a bit tight Please use a round file to remove any burrs or to make the hole slightly bigger If you want to see what type of mechanism matches these hands, please follow the link ... European-style clocks