ALL FANS ARE SUPPLIED WITH A FREE FITTING KIT
UNIVERSAL FOR ALL VEHICLES
CURVED BLADE DESIGN (please note that 7" fan has straight blades) ALLOWS OPTIMUM COOLING
PUSH OR PULL AIRFLOW BY SIMPLY REVERSING THE POLARITY
LIGHTWEIGHT DURABLE SLIMLINE DESIGN
MADE WITH QUALITY COMPONENTS
FITTING KIT INCLUDED
FITTING GUIDE INCLUDED
7INCH
POWERFUL 80w MOTOR
DIAMETER OUTER CASE= 8.5"
DEPTH AT CENTRE OF MOTOR= 2.5"
BLADE DIAMETER= 7.5"
CFM= 1200
9INCH
POWERFUL 80w MOTOR
DIAMETER OUTER CASE= 9.75"
DEPTH AT CENTRE OF MOTOR= 2.5"
BLADE DIAMETER= 9"
CFM= 1300
12INCH
POWERFUL 120w MOTOR
DIAMETER OUTER CASE= 12.5"
DEPTH AT CENTRE OF MOTOR= 2.5"
BLADE DIAMETER= 11"
CFM= 1730
WE ALSO STOCK 12" FANS WITH A 220W MOTOR
14INCH
POWERFUL 120w MOTOR
DIAMETER OUTER CASE= 14"
DEPTH AT CENTRE OF MOTOR= 2.5"
BLADE DIAMETER= 13"
CFM= 2150
WE ALSO STOCK 14" FANS WITH A 220W MOTOR
16INCH
POWERFUL 120w MOTOR
DIAMETER OUTER CASE= 16.5"
DEPTH AT CENTRE OF MOTOR= 2.5"
BLADE DIAMETER= 16"
CFM= 2500
Variable Capillary Thermostat Control Switch
Allows you set the temperature you wish the cooling fan to operate
The Fan will kick in at the selected temperature and then switch of when the engine temperature goes back down.
To fit in the hose simply remove the top radiator and fully insert the probe, then re fit hose and tighten over the capillary wire being extra careful not to damage the probe inside. Silicone sealant can be used to help seal if required.
Wiring Instructions
C Terminal = 12v Feed
No2 Terminal= Power out to the fan (the switch is earthed through the fan)
No1 Terminal= Leave blank, this is not required for this application
You can also wire a relay in if you wish, but this is not a requirement.