See Details on eBay

3w RGB Underwater Led Pool Stair Light 2 Inch Wall Fittings with Remote Control

EUR 102,23 Buy It Now Unsold, 30-Day Returns

Seller: brillantelv-usa (88) 98.6%, Location: Anaheim, California, Ships to: US, Item: 272687657712 bt 3w RGB Underwater Led Swimming Pool Light for 2 Inch Wall Fittings Bulb Lamp with Remote Control 2A-H_ABS-RGB3w ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › ‹ › Enjoy brighter lighting, save on electricity and set the color of your pool lights at will with this 3w underwater swimming pool/outdoor LED lights. Easily replace your current lights. Our LED lights are designed to be a direct replacement for all major brands of lights in concrete, fiberglass and vinyl pools. You can even use your current wiring and transformer (with 12V AC output rate). These modern LED lights use around 88% less energy than the older halogen counterparts. This upgrade will not only improve the looks of your pool or stair, but it will considerably decrease the running costs of your electricity bill. Features: Give a brighter and modern look to your pool. Set the color of your pool lights using remote control. Save on Electricity. Save up to 88% in electricity. Simple to Upgrade. Easy to follow steps. Uses your current installation including the wiring and transformer. Specifications: 1.Color: RGB 2.Dimension: dia.94.27*H91.55mm 3.Input voltage: 12V AC 4.Watt: 3W 5.Material: ABS 6.Light angle: 120 degree 7.CE ROHS IP68 8.Cable length:1.2 Meter (4 Feet) 9.Working temp.: 0-60 degrees One Year Local Warranty Package Includes: 2 x 3w Underwater LED Light 1 x “T” waterproof connector 1 x Waterproof connector 1 x Remote Control *Note: This pool light need transformer with power output AC 12V *Transformer is not included *Not suitable for salt water pool Change RGB color using remote control: The color changing mode is with 3 colors(R/G/B) flashing, press buttons to choose the modes, Time interval for press buttons must be 1-2 seconds. Button A: 7 color modes (R,G,B,R+G,R+B,G+B,R+G+B 7 individual colors choose) Button B: 4 color modes (3 colors flashing slowly, 7 colors flashing slowly, 3 colors flashing quickly, 7 colors flashing quickly) Button C: 4 color modes (3 colors scrolling slowly, 7 colors scrolling slowly, 3 colors scrolling quickly, 7 colors scrolling quickly) Button D: Power button (ON/OFF) Notes: 1.The button "A, B & C" works Only when button "D" is on. 2.Press button “D” to turn on/off the lights and the final mode (applied for individual colors/ flashing/scrolling modes) It will be recorded as starting mode of next power-on by pressing button “D”. If cut off the transformer power, and plz power on after about 5s will reset to the begining mode 3 colors(R G B) flashing. 3.When using the remote control, make sure the antenna is stretch to receive the signal well, control within 50 meters. If you use one remote for more than 2pcs lights, make sure the current of power supply is enough for all the lights, the long wire is possible to lower the power of transformer. If you want all the lights color changing Synchronously, please press the button for at least 2 seconds to make sure all lights at the same color If you want all the lights color changing Synchronously, please press the button for at least 2 seconds to make sure all lights at the same color cut off the transformer power over 10 seconds, then power on to make them Synchronized. 4.Use switch on/off when batteries of remote control run out or there’s any other electromagnetism signal with similar frequency around the lam changing one mode to next mode by switch on/off one time. Time interval for each switch on/off should be within 2 seconds. Change RGB color without using remote control: 1)Power on/off controlled. -The lights has 16 different kinds of color styles. And the lights has switch on/off function, you can change the color with power on/off in short time; 2)Memory function. -So when you turn off the lights after 15 second, and turn on the lights, the light color is the same as its' turned off last time. 3)Reset function. -Whatever the color of the lamp, you can let the lamp start from the first color, and synchonize all the lamp. 4)Synchronize the color of all the lamp. -Power on/off in short time for particular light, when it in same color/mode, power off all light and on it back after 15 seconds. Condition: New, Bulb Type: Led, Brand: Unbranded, Type: Underwater Light, MPN: Does Not Apply, Watts: 3 w, Number of LED: 27, Model: RGB_5w_Stair, Wire Length: 4 Feet

PicClick Insights PicClick Exclusive
  •  Popularity - 75 views, 0.4 views per day, 201 days on eBay. High amount of views. 0 Sold, 30 Available.
  •  Price -
  •  Seller - Over 88 items sold. 1.4% negative feedback. Great seller with very good positive feedback and over 50 ratings.
People Also Loved