3.3V/5V DS3231 DS3231SN RTC I2C Real Time Clock Module for Raspberry Pi

£2.92 Buy It Now, £1.19 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: cayin35 ✉️ (135,529) 99.8%, Location: 深圳, 廣東省, CN, Ships to: WORLDWIDE, Item: 192436444487 3.3V/5V DS3231 DS3231SN RTC I2C Real Time Clock Module for Raspberry Pi. 3.3V/5V DS3231 DS3231SN RTC I2C Real Time Clock Module for Raspberry Pi Arduino Description:
Note: There is no batteries in package of below items!
1.Mini RTCpro DS3231

Brand new and high quality.
Use DS3231 high precision real time clock chip (IIC interface rate of 400 KHZ).
Reserved AT24Cxx IIC interface EEPROM memory interface, such as the need for welding.
High precision 32.768 KHz removing crystal vibration chip internal integration,
0℃ to 40℃ range precision 2 PPM, in error about 1 minutes.
The internal temperature sensor chip precision 3℃, a resolution of 0.5℃,
measurable environmental temperature.
Welding CR927 3 v battery charging.
Join meter diode power supply end, connect the power supply without power not to burn.
Set the power indicator light.
Leads to the SQW/INT and 32 KHZ square wave output interface,
can be different frequency square wave output or output clock interrupt.
Other IIC can cascade equipment, welding 6 p bent pin.
Size: 3.8cm x 1.5cm.
Package Include:1x Mini RTCpro DS3231 Clock Module Temperature Real Time Clock

DS3231 AT24C32

1 Size: 38mm (length) * 22mm (W) * 14mm (height)
2 Weight: 8g
3 Operating voltage :3.3 - 5 .5 V
4 clock chip: high-precision clock chip DS3231
5 Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
6 calendar alarm clock with two
7 programmable square-wave output
8 Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
9 chip temperature sensor comes with an accuracy of ± 3 ℃
10 memory chips: AT24C32 (storage capacity 32K)
11.IIC bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
12 can be cascaded with other IIC device, 24C32 addresses can be shorted A0/A1/A2 modify default address is 0x57
13 with rechargeable battery LIR2032, to ensure the system after power failure, the clock move any natural normal
14 Packing: single anti-static packaging
Wiring instructions (with Arduino uno r3 for example):
SCL → A5
SDA → A4
VCC → 5V
GND → GND
Shipping list:
1.DS3231 module a (tested good antistatic packaging )
Note: don't inclue battery,it only need 0.01 dollars,it's not safty to ship by air mail.hope you can understanding
(2) an electronic file data (including test procedures Arduino, PDF format schematics, data sheet)
Package Included: 1 x DS3231 module

DS3231 RTC

1. to 40℃ to + 85℃ temperature range, timing accuracy in
   a plus or minus 5 PPM (+/- 0.432 SEC/day)
2. To provide continuous timing battery backup
3. Low power consumption
4. The device compatible with DS3231 encapsulation and function
5. Complete the clock calendar function including the second, minute,
time, week, date, month, and year, and provide the valid until 2100 leap year
6. Two calendar clock
7. 1 Hz and 32.768 kHz output
8. Reset the output and input button to tremble
9. High speed (400 KHZ) the I2C serial bus
10.+ 2.3 V to + 5.5 V power supply voltage
11.The accuracy of plus or minus 3℃ digital temperature sensor
12.- 40 ℃ to + 85℃ temperature range
Package Include: 1 x Precision DS3231 RTC Module Memory Module For Arduino Raspberry Pi

DS3231SN 3 in 1 LED

Under non-setting state, press the left button of adjustment time (note in the middle of the colon is bright), 1. At this time "minute" starts flashing, increase press right, adjust the range 00 to 59. After a good tune, "minute", 2. Press the left button, then the "hour" starts flashing, increase press right, adjust the range 00 to 23. 3. tuned "hour", then press the left into the adjustment date (note in the middle of the colon is off), then "day" starts flashing, press right to increase adjustment range 1-31. 4. tuned "day", then press the left button, then the "month" starts flashing, press right to increase adjustment range 1-12. 5. After adjusting the date, then the left, then "year" starts flashing, increase press right, adjust the range 2012-2049. 6. adjust the "year", then press the left button, go to show the error voltage calibration function [x.xU], the unit is 0.1V, a positive number indicates an increase, a negative number indicates decrease. 7. Then press the left button, enter the temperature error calibration settings [Ac: xx], xx on behalf of the correction value, increased by right, a positive number indicates an increase, a negative number indicates decrease in degrees. 8. Press the left, into the cycle defined function dd option status display items, press the right to change the value: (dd: 0) time + temperature + voltage, (dd: 1) time + voltage, (dd: 2 ) time + temperature, (dd: 3) Temperature + voltage. Press the left button, the display alternately into circulation interval dF option, press right to change the value, the greater the value the longer the interval. DF Do not set to 0, otherwise it will be black. 9. Finally press the left button to save all settings value and return to normal display. How to change Secondly, switch the display items Under non-setting state, press the right key to switch the display, the display will be in time ---> Date ---> Temperature ---> voltage ---> alternately Package Include: 1 x DS3231SN 3 in 1 Digital Clock Time Thermometer Voltage Module

DS3231SN IC


Package Include:1 x DS3231SN IC
Payment Mathord

1. PayPal payment accepted only.

2. Items will be shipped to your eBay address. Please make sure it is correct.

3. Payment must be received 4 days after auction ended.

Returns Policy

1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer. 

3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.

4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response. 

About Feedback

When you satisfied with our product and services please leave us positive feedback.

If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay. 


On 24-Jan-18 at 03:46:16 GMT, seller added the following information:


On 13-Jun-20 at 09:25:23 BST, seller added the following information:

  • Condition: New
  • item: Mini RTCpro DS3231
  • Brand: Unbranded/Generic

PicClick Insights - 3.3V/5V DS3231 DS3231SN RTC I2C Real Time Clock Module for Raspberry Pi PicClick Exclusive

  •  Popularity - 8 watchers, 0.0 new watchers per day, 2,257 days for sale on eBay. Super high amount watching. 0 sold, 0 available.
  •  Best Price -
  •  Seller - 135,529+ items sold. 0.2% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive