SFU1605 Ballscrew Linear Rail Slide Module Cross Sliding Table Actuator CNC
Benefits:
1. handwheel can be replaced by motor
2. It can be equipped with hand wheel, stepper motor, servo motor, AC motor, DC
motor
3. It can organize cross, vertical, three-axis, four-axis gantry structure
4. The cushion is added before and after the sliding table to extend the service
life of the sliding table.
5. The front end increases the diagonal bearing seat, the sliding table has high
precision and better stability.
6. If there are no special requirements, we will ship the goods according to the
picture and title description.
Ball screw type: 1605 (diameter 16mm, lead 5mm )
Material: Aviation Aluminum 6061
Effective travel | Precision |
Repositioning resolution | Lead Screw | Horizontal Load | Vertical Load | |
100mm | 4Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
200mm | 8Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
300mm | 12Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
400mm | 15.7Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
500mm | 20Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
600mm | 23.6Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
700mm | 27.5Inch | C7 | 0.03MM | 1605 | 30KG | 15Kg |
Package Included :
1 x Cross Sliding Table 1 x Nema23 Motor Seat Dimension :