UNC 5/16" Socket Cap Screw A2 304 Stainless Steel DIN912

£3.37 Buy It Now, FREE Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller benb4ll ✉️ (78,334) 99.8%, Location: Cheltenham, England, GB, Ships to: GB, Item: 295175750631 UNC 5/16" Socket Cap Screw A2 304 Stainless Steel DIN912.

UNC 5/16" Socket Cap Screw A2 304 Stainless Steel DIN912 UNC, 5/16" (18 T.P.I.), Coarse Pitch, A2/ 304 Stainless Steel, Allen/ Hexagon Socket, Cap Head, Allen Bolt, DIN 912, ISO 4762, BS 2470 Fixaball sells all lengths of 5/16"", UNC, socket cap screws/ bolts. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head. Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus. UNC, 5/16" A2/ 304 Stainless Steel, Allen Socket, Cap Head Screw/ Bolt lengths available: (FT - Fully Threaded, PT - Partially Threaded) Material: A2/ 304 Stainless Steel Material/ Finish Appearance Level of Corrosion Resistance Typical Application Self Colour A2/ 304 Stainless Steel Dull Shine, Grey High - External Weathering not prone to chemical exposure e.g. salt water UNIFIED THREAD STANDARDS The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms. Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread. Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically used on instruments and parts requiring a fine adjustment. Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads. Image is for illustrative purposes only.

UNC 5/16" Socket Cap Screw A2 304 Stainless Steel DIN912

UNC, 5/16" (18 T.P.I.), Coarse Pitch, A2/ 304 Stainless Steel, Allen/ Hexagon Socket, Cap Head, Allen Bolt, DIN 912, ISO 4762, BS 2470

Fixaball sells all lengths of 5/16"", UNC, socket cap screws/ bolts.

What is a socket cap screw/ bolt?

The, ‘Socket Cap Screw/ Allen Bolt,’ term is uséd to describe a fastener  that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.

 

Orders placed before 2pm are dispatched  same day (Mon-Fri).

Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. 

Please make your  'No. of Items in Pack', 'Length'  and  'Quantity'  of packs, selection from the drop down menus.

 

UNC, 5/16" A2/ 304 Stainless Steel, Allen Socket, Cap Head Screw/ Bolt lengths available:

(FT - Fully Threaded, PT - Partially Threaded)

  

Material: A2/ 304 Stainless Steel

Material/ Finish

Appearance

Level of Corrosion Resistance

Typical Application

Self Colour A2/ 304 Stainless Steel

Dull Shine, Grey

High

-          External Weathering not prone to chemical exposure e.g. salt water

UNIFIED THREAD STANDARDS 

The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size

 

Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms.

Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread.

Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically uséd on instruments and parts requiring a fine adjustment.

Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads.

 

Image is for illustrative purposes only.

 

× × ×

Tell a friend Visit store Watch now

Postage info

Royal Mail 48 - £0.00


Royal Mail Tracked 24 - £2.50
UPS Next Day - £9.00
Royal Mail Tracked 48 - £1.75 Click the Postage tab above the listing description for more info

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYING VIA PAYPAL

We accept PayPal on our all our items so you can shop with confidence.

Simple choose the PayPal option when proceeding through the checkout.

Paying via Direct Deposit

Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.

Additional Information

No additional information at this time

Ask seller a question

You might also like

M3 Dowel Pins A1 Stainless Steel DIN 7

M5 Dowel Pins A1 Stainless Steel DIN 7

M6 Dowel Pins A1 Stainless Steel DIN 7

UNF 1st Tapered Quality Machine Hand Taps HSS Contact

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Fixaball

Postage

Click the Postage tab above the listing description for more info

Payment

Accepted Payment Methods

  • PayPal
  • Direct Deposit
Returns

Returns are accepted

Items must be returned within 60 days of the auction ending

Seller will pay for return shipping.


Additional Information: 'No Quibble' Guarantee. You do not need a reason to request a return. All returns are automatically accepted. Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging and saleable. To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted (if applicable). i.e. Restocking Fees. Any item not in its original condition, is damaged or missing parts for reasons not due to our error Any item that is returned more than 30 days after delivery. eBay integration by
  • Condition: New
  • No. of Items in Pack: 2
  • Length (inches) (inches): 5/16"-18 x 1/2
  • Brand: Fixaball - UNC- Cap Head
  • Colour: Self
  • Country/Region of Manufacture: United Kingdom
  • Drive Style: Allen Hexagon Socket
  • Finish: Self Colour
  • Gauge: UNC 5/16"
  • Grade: A2 304 Stainless Steel
  • Head Style: Cylindrical Cap
  • Item Diameter: UNC 5/16"
  • Item Length: 1/2" - 4 1/2"
  • Item Type: UNC- Cap Head
  • Material: A2 304 Stainless Steel
  • Screw Size: UNC 5/16"
  • Size: Imperial UNC
  • System of Measurement: UK
  • Tensile Strength: A2 304 Stainless Steel
  • Thread Size: Imperial UNC
  • Type: UNC- Cap Head

PicClick Insights - UNC 5/16" Socket Cap Screw A2 304 Stainless Steel DIN912 PicClick Exclusive

  •  Popularity - 24 watchers, 0.0 new watchers per day, 584 days for sale on eBay. Super high amount watching. 1 sold, 9 available.
  •  Best Price -
  •  Seller - 78,334+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive