Arduino Nano V3.0 (SOLDERED)
PRODUCT INFORMATION
The Arduino Software is an Integrated Development Environment that is common to all Arduino boards and runs both online and offline.The detailed specification of the Arduino board is as follows:
Select (old bootloader) before uploading
tools/processor
ATMega328p (old bootloader)
The Nano is a surface mount breadboard compatible embedded version of Arduino with integrated USB.
It is the smallest, complete and breadboard friendly Arduino module.
Physically, it is missing a power jack. The Nano automatically senses and switches to the higher potential source of power, so, there is no need for the power select jumper.
The NANO V3.0 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers.
The ATmega328 provides UART TTL (5V) serial communication, which is available on digital pins 0 (RX) and 1 (TX).
A CH340G chip (replaces FTDI FT232RL) provides the serial communication over USB.
The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the CH340G chip and USB connection to the computer (but not for serial communication on pins 0 and 1).
Microcontroller ATmega328P
Operating Voltage (logic level): 5 V Input Voltage (Recommended): 5-12 V Input Voltage (limits): 6-20 V
Powering up the Arduino Nano :
The Arduino Nano can be powered by means of the Mini-B USB, 6-20V unregulated external power supply (stick 30), or 5V regulated external power supply
Digital I/O Pins : 14 (of which 6 provide PWM Output) Analog Input Pins: 8 DC Current per I/O Pin: 40 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM: 2 KB (ATmega328)
Features:
ATmega168 processor running at 16MHz
CH340 serial to USB converter
16KB Flash memory
14 Digital I/O
6 PWM shared with the digital I/O
8 Analog inputs that can also be used as digital I/O for a total of up to 20 digital I/O
1 Hardware serial port
Resources:
CH340 version 3.4.2014 drivers required :
Mac OSX, Windows, Linux CH340G Drivers - Google 'Sparkfun How to Install CH340 Drivers'
Contents:
1 soldered arduino nano and 1 mini usb cable.
If you are not 100% satisfied, PLEASE do not leave a neutral or negative feedback but contact us by eBay message or email first so that we can help you.