Module 1 Nylon Plastic Worm Gear Wheel 15 - 80 Tooth Steel Worm Shaft Precision.
Precision
Worm Gear Wheel, Right-hand, Module 1, Number of teeth
15 - 80, Bore
6mm
- 12mm, made of Plastic Nylon, Blue
Worm Gear Shaft, Right-hand, made of
C45 Carbon Steel / Stainless Steel, 3 types available
Note:
- Worm Gear Wheel and Worm Gear Shaft are sold separately on this link!Therefore, if you want to use them in pairs, you will need to purchase the worm gear wheel and worm shaft separately.
- Worm gear wheel and worm gear shaft can only be used in pairs if they are of the same gear module.
- Modulus is the model, on behalf of the size of the gear teeth. The larger the modulus, the larger the teeth, the more force they can withstand.
- Nylon gear due to material problems, individual gears may have a little burr, but does not affect the actual use, if you mind, please buy with caution.
- Please use the drop down menu to select your required number of teeth and bore size.
- Bore options are not marked keyway size, the default is through-hole, there are marked keyway size is the keyway hole, attention to distinguish between the purchase.
- External dimensions (e.g. hub diameter, total thickness) are subject to may change according to production lot without further notice.
- If you need other sizes, shapes and quantity , you can also contact us to support custom. Professional equipment processing.
High-quality materials, exquisite craftsmanship, safe, reliable and durable, long service life, complete specifications, convenient and flexible use, and better cost performance.
Nylon gears have good mechanical and chemical properties, wear-resistant, anti-corrosion, self-lubricating, low friction coefficient, smooth transmission, low noise
Long service life: Nylon gears have good abrasion resistance, impact resistance and corrosion resistance, and can maintain efficient and reliable operation during a long time of use.
Strong load-bearing capacity: Nylon gears can withstand large loads, with high strength and hardness, suitable for heavy-duty working environment.
Small friction coefficient: Nylon gear material surface friction coefficient is small, can effectively reduce the gear contact surface wear and energy loss, improve transmission efficiency.
Ideal replacement for gears made of metal and other materials
All purchased gears are delivered with grub screws .
3 types of worm gear shafts are available.
● Product Name: Worm Gear Wheel
- Standard Part
-
Material: Plastic Nylon
-
Colour: Blue
-
Gear Module (M) = 1
-
Pitch (P) = 3.14mm
-
Diametral Pitch (DP) = 1 inch ( 25.4mm )
-
Pressure Angle: 20 degrees
-
Direction: Right-hand
-
Available
Number of teeth (Z):
【15 Tooth】,Gear Ratio 1:15
【20 Tooth】,Gear Ratio 1:20
【25 Tooth】,Gear Ratio 1:25
【30 Tooth】,Gear Ratio 1:30
【35 Tooth】,Gear Ratio 1:35
【40 Tooth】,Gear Ratio 1:40
【50 Tooth】,Gear Ratio 1:50
【60 Tooth】,Gear Ratio 1:60
【80 Tooth】,Gear Ratio 1:80
-
Available Bore Diameter: 6mm / 8mm / 10mm / 12mm
● Product Name: Worm Gear Shaft
- Standard Part
- Available
2 Materials: Stainless Steel or Medium Carbon Steel C45 ( DIN 1.0503,AISI/SAE 1045,JIS S45C)
- Available
3 Types: Type A / Type B / Type L
-
Gear Module (M) = 1
-
Pitch (P) = 3.14mm
-
Diametral Pitch (DP) = 1 inch ( 25.4mm )
-
Pressure Angle: 20 degrees
-
Direction: Right-hand
● Exact dimensions can also be viewed in the photo gallery.
●
Note: Standard Manufacturers Tolerances Apply
● You can find more products in different material, type, color, sizes, quantity and shapes in our shop! If you have special needs, please contact us, we can customize according to your needs!
● Note:
- Please allow minor errors due to manual measurement. Thank you for your comprehension.
- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.
Package included : ( According to your choice )
On 22-Mar-2024 at 16:06:54 GMT, seller added the following information: