1.7W Copper 445nm M140 Blue Laser Module W/X-Drive & Three Element Glass Lens

EUR 106,97 Buy It Now 23d 9h, EUR 12,48 Shipping, 30-Day Returns, Pay with PayPal and you're fully protected.

Seller: dtr-lpf (7.108) 100%, Location: Saint Louis, Missouri, Ships to: Worldwide, Item: 170894516622 Listing is for a single 1.7W 445nm Laser module. Unit consists of a 2W M140 diode mounted in a 12mm X 30mm copper module, prewired with a 1.8A X-Drive bucking laser driver and comes with a 405-450nm coated three element glass lens. The unit is ready to be dropped into your final project. No setting current or soldering diode to driver. Just place module in a heatsink and connect leads to your power source. Input voltage range is 6V-9V. Great for use with two Li-Ion's in series or any 6-9V 2A power source like a wall adapter or bench power supply. Here is what you get. The X-Drive is encased in the back of the model connected to the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. Wire assignment is:Red +Black - Wavelength 445nm +/- 5nmInput Voltage 6V-9VDriver Output Current 1800mADriver Current Draw 1.4A +/- 0.5APower Output 1.6W-1.9WDriver Type Constant CurrentLens M9x0.5mm Threaded Three Element Glass LensReverse Polarity Protection Yes will blow a fuse to save the diodeDuty Cycle 90 seconds on 30 seconds off with proper heatsinking 2W M140 445nm Laser DiodeHere is a quick power test on the M140 using a G-2 glass lens. *Disclamer* By purchasing these diodes you are agreeing to the following. - You are over 18 years of age . - You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product. - You will use these as components and properly incorporate them into a finished product. - You will use these diodes/modules in a safe and responsible manner and for a legal purpose. - You are legally responsible for the use of these components, improper use of these components or their end products. - You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products. - You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products. Condition: New, MPN: Does Not Apply, Brand: DTR's Laser Shop

PicClick Insights PicClick Exclusive
  •  Popularity - 12.530 views, 4.9 views per day, 2.533 days on eBay. Super high amount of views. 71 sold, 5 available.
  •  Price -
  •  Seller - 7.108+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Similar Items