ModuleMe Electronic  

12V~40V 10A/5V-35V 5A PWM Motor Speed Control Switch Controller Regulator Dimmer

1. DC8-55V 10A DMC-331 DC Motor Speed Regulator   Description： This product brings together a wide range of modern motor speed control, with the advantages of small size, simple operation, high current resistance and reverse connection. Suitable for most users in various environments with various speeds, support acceleration and deceleration functions can be set through the menu, with set parameters power off permanent memory function
product manual:
Voltage: DC8V-55V (wide voltage anti-back protection)
Speed ​​range: long press / short press to adjust the degree, 0% -100% speed
Drive current: up to 10A, (recommended output series 12A fuse)
Standby current: <17mA
Mounting hole: diameter 3mm
Product size: 64mm*35mm*19mm (length * width * height)
Working temperature: -20 ° C ~ 70 ° C
Instructions:
1. Click/long press the “speed increase” button to increase the motor speed to 100%.
2. Click/long press the “speed down” button to increase the motor speed to a minimum of 0%.
3. Press and hold the “Power On/Off” button for one second, the controller will be turned on or off (the power is turned off by default, and the memory function is activated after booting) Precautions:
1. The digital tube flashes at the moment of power-on (normal phenomenon, no need to worry)
2, close to the limit drive current working conditions, it is recommended to take the output end of the fuse
3. The DC motor speed controller cannot be installed in places where there is dripping water and children can reach it.
4. After wiring, check if the line is correct and then energize, so as to avoid accidentally burning the temperature controller and load device. Wiring:
“M+” and “M-” are respectively connected to the positive and negative terminals of the output, M+ is positive and M- is negative.
“VIN” and “GND” are respectively connected to the positive and negative terminals of the input terminal, Vin is positive and GND is negative (input power supply voltage is DC8V-55V)   Package Included: 1*DMC-331 DC 8-55V 10A Motor Speed Regulator    2. 4.5-35V 5A PWM DC Speed Controller Switch Product parameters: Operating voltage: DC4.5V-35V
Output current: 0-5A
Output power: 90W (max)
Quiescent current: 7uA (standby)
PWM duty cycle: 1% -100%
PWM frequency: 20khz
Size: 30mm x 26mm x 14mm (Without Handle) Precautions: DC motor governor input is DC, can not directly connected to the AC (for example: home 220V AC), otherwise it will burn!
DC power supply positive and negative terminals do not reverse, otherwise the governor may be damaged.
The motor can be positive or negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes. Package Included: 1 x 5V-35V Speed Control Switch   3. 10A 12V-40V PWM Speed Control   Description: Controls the speed of a DC motor with this controller High efficiency, high torque and low heat generation With reverse polarity protection,high current protection Operating
Voltage: DC 40V 12V DC Control Power
consumption: 0.01 400W
Static current: 0.02 A (Standby)
PWM Sampling rate: 0% -100%
PWM frequency: 3 kHz
Dimension (L x W x H): approx. 73 x 60 x 27 mm
material: plastic, metal Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
The measurement allowed error is +/-1-3cm.

Package Included: 1 x Speed Controller

• Payment
• Shipping
• Refund

Payment

1. We accept PayPal only. But we only Accept your Ebay Address ,Please Make sure it's 100% right.
2. Payment must be received in 5 business days of auction closing.
3. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
4. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

1. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

Refund

1. All package need to wait 30 days (US only n eed 7-10 days) ,Please take care it.Less than 30 days,we can't take a refund.
2. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
3. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

 

• Condition: New
• select: 10A 12V-40V PWM Speed Control
• Brand: Unbranded/Generic

See More