Our Slimline letter boxes are specially designed to fit doors with smaller aperture heights. The internal and external flaps are aluminium , the letterbox surround is manufactured from ABS plastic. The Slimline letterbox is weather sealed with external and internal weather seal rubber strip along the closing edge, both flaps are fully spring loaded. Comes complete with compression gasket and fixing screws. Fitted with non-corrosive spring mechanism.
Available in White and Gold.
Features:
What's in the pack?
1 x External flap and surround
1 x Internal flap and surround fitted with foam draught seal
1 x Pack Fixing Screws
N.B: THIS MUST BE DONE BEFORE INSTALLATION. Two screw fixings are included. Please check the screws are suitable for your application as they will not suit all door thicknesses. It may be necessary to trim or seek alternative screws for your door, the screws provided will fit the majority of door thicknesses, but not all sizes.
Measuring Guide:
First remove your letterbox by lifting the flaps and unscrewing the fixing screws or bolts. Once the letter box is removed measure the exact width and height of the aperture (hole) and check the the sizes against the diagram below. Measure the door mid rail - panel thickness to determine the letter box thickness needed (i.e. 20/40mm or 40/80mm). You may well find there are a few millimetres difference to your existing letter box, the door mid-rail or panel aperture can easily be trimmed using a hacksaw or similar.
Dimensions:
Please see diagram in gallery.