【EU】DDCSV 4.1 Cnc Offline Controller 4 Axis Offline Control 500Khz+24V DC Power
Good News: New items have arrived Germany warehouse, welcome you to purchase.
We have Germany Warehouse in Germany,so we can ship from Germany to European Union Customers.
We ship via DHL GLS to European Countries.
Good News: New items have arrived Germany warehouse, welcome you to purchase.
We have Germany Warehouse in Germany,so we can ship from Germany to European Union Customers.
We ship via DHL GLS to European Countries.
4 Axis DDCS V4.1 500Khz Stand alone Motion Offline CNC Controller+ Handwheel + 75W 24V DC Power Supply
-
1 x 4 Axis CNC Motion controller (DDCS V4.1)
1 x 4GB USB Flash drive
1 x USB Extension Cable
1 x 4 Axis Pendant Handwheel with Emergency stop
2 x 75W 24V DC Power Supply
English manual will send to your email.
4 Axis CNC Motion controller (DDCS V4.1)
1.1 Introduction of Product
The DDCS V4.1 3-4 axes motion controller for stepper and servo system, is updated from DDCS
V3.1 on software and hardware. It combines great advancement with tiny footprint of each days from
past 8 years, when we released the first DDCS products DDCS V1.1. After a very short time you will be
familiar with the functions and this manual will help you.
The DDCS numerical control system adopts the ARM+FPGA design framework. ARM controls the
human-computer interface and G-code analysis and the FPGA provides the underlying algorithms
and creates the control pulse. This guarantees reliable control and easy operation. The internal
operating system is Linux based.
The panel layout structure of the DDCS V4.1 is very rational to save space. All operations are
controlled by only 17 keys and the keys are composite keys that can act as function keys or numeric
keys. DDCS V4.1 support comprehensive Fanuc G code set.
The DDCS can be used for many styles and types of CNC machines. Lathes, Routers, Pick&Place
and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a
computer. This guarantees high precision, accuracy and reliability. The interface, even though very
comprehensive, can be learned in a very short time.
1.2 DDCS V4.1 Brief technical feature:
1) 18 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs.
2) The spindle can be configurated as Analog spindle(0~10V) and also Ser vo spindle.
3) 3-4 axes motor Control. Differential Mode and Double Pulse Mode output signal for optional,
Maximum interpolation pulse output frequency is 500Khz/Axis, 2-4 Axis linear interpolation, any 2
axis circular interpolation;
4) ARM9 main control chip,FPGA core algorithm chip.
5) 7 inches TFT screen, Size: 1024x600 Pixels, Resolution：72 Pixels/Inch; 17 operation keys.
6) The Power Supply for IO Port is 24VDC,minimum current is 0.5A, the Power Supply for Controller
system is also 24VDC,minimum current is 0.5A. Controller needs both power to work properly.
7) USB flash disk support for G code file input; Can transfer the files by Ethernet communication
between the computer and DDCS V4.1 controller; No size limited of the G-code file.
8) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam,
MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
9) Support standard MPG.
10) Support function o“f Try cutting” (handwheel guiding) function.
11）Support Jog function for each axis (continuous, step, defined distance), Customer can define
the distance.
12）Support Float Probe, Fix Probe, Vertex Probe and Tool Length Measurement.
13) Support the operation of quickly go to specify line and closest position.
14) Support Array Machining, Sequence Machining, Milling Plane Machining, and Milling sylindrical
machining.
15) Support Bias for XYZA axis, and can defind the Bias distance.
16) Support Pause breakpoint, Power-Cut Recovery Beakpoint and loaded breakpoint; And
Support Start from the specific line and closest line.
17) Support Multiple origin points operation， the users can create an origin point and load it.
18) Support Find Middle for X and Y axis.
19) Improved the simulation function. During the simulation, you can adjust the FRO and
observe whether the programming path meets the expectations and check the soft limits. During the
simulation, it can be paused, and when press the Start key again, the system will continue to simulate
from the pause breakpoint.
20) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.
21) Now English and Chinese language is avaliable; System also suppport International coding,
almost support all language, the users can add their own language to the control system.
22) DDCS V4.1 Only Supports NPN Type Limited Switch.
23) Support 4 kinds operation rights: visitor, operator, admin, super admin.
1.3 DDCS V4.1 New features compared to previous version:
1) Added USB port and Ethercat Port on DDCS V4.1.
2) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.
3) Added Servo Spindle option.
4) Add Polar coordinate programming commands and Rotation commands, and completed
Radius compensation commands on DDCS V4.1 controller.
5) DDCS V4.1 controller upgrades the motion algorithm, by Machining profile accuracy configuration,
makes a long g-code program with short line segments running smoother.
6) No matter how big program file it is, system can quickly active the function of Start from Specified
line and Start from closest point in few seconds.
7） Improve the simulation function. During the simulation, you can adjust the FRO and observe
whether the programming path meets the expectations and check the soft limits. During the simulation,
it can be paused, and when press the Start key again, the system will continue to simulate from
the pause breakpoint.
8） DDCS V4.1 added driver alarm input ports, and can configurate the ports No.as you want.
Same as DDCS-Expert.
9） We add cycle encoder for A axis, which is good for unlimited rotation for A axis.
10） Added the window for analysis prompt.
11） Suppport International coding, almost support all language, the users can add his language
for the control system.
12） Increased the Parameters about the acceleration when Estop, to avoid collision by Stop
when Estop the machine in high speed, edit the related parameters and system can give a smooth
stop, this means there is no position loss.
13) System FPGA cited 32 -bit speed generator, with higher resolution for the speed / acceleration,
it means higher positioning accuracy.
1.4 Appearance, Structure and Size of Product
The DDCS V4.1 is a small box that can fit in a window of a small control box or control cabinet.
Four locking hooks fix this controller from the frame. The dimension you find in Figure 1-3.
The front panel is 237 mm * 153.7 mm * 5.2 mm；
The main body is 237 mm * 153.7 mm * 48.2 mm；
To mount the unit in an equipment cabinet, cut the hole 228.5 mm * 83.7 mm.
Accessories: 1) The Wiring Board for DDCS V4.1 and DDCS V3.1； 2） DB37 Cable, for the wiring between the board and DDCS V4.1 controller, 3 meters; 3) USB Extension cable 50cm; 4) USB stick; 5) screws.
4 aixs Pendant Handwheelwith emergency stop
I. Pendant Handwheel with Emergency stop
Description:
1.The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100
selectable, You are bidding one complete unit of the MPG pendant with
Emergency stop for 4 axis CNC machine, it equipped with our popular
machined MPG unit with 4 axis and scale selector, LED indicator also
send feedback from the CNC machine to user about the status of the unit. 2.All Wiring isolated from MPG unit and provide a easy to install wiring
diagram, it suit both commercial machine as a replacement jog control
unit or other computer based controller. Which add great control
flexibility to the system. Specification: 1. x1, x10, x100 switch 2. X,Y,Z,4th axis selector switch 3. LED indicator 4. With Emergency stop 5. High quality professional chassis 6. 6ft extendable high quality shielded cable cord 7. Magnetic base holder can place anywhere on the machine steel surface 8. Required 5V+, 150mA, power for MPG 9. Phase output is A ,/A and B,/B; 10. TTL output, drive capability +-20mA; 11.Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series,
Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW,
8055I) and so on. 12.Wiring:User can wire this unit to the CNC system with easy. DDCS V4.1 MPG Wiring MPG handwheel interface is showed as figure 2-15. The users need to weld the MPG cables to the DB15 male parallel port, then plug into the controller DB15 female parallel port.
-
1 x 4 Axis CNC Motion controller (DDCS V4.1)
1 x 4GB USB Flash drive
1 x USB Extension Cable
1 x 4 Axis Pendant Handwheel with Emergency stop
2 x 75W 24V DC Power Supply
English manual will send to your email.
4 Axis CNC Motion controller (DDCS V4.1)
1.1 Introduction of Product
The DDCS V4.1 3-4 axes motion controller for stepper and servo system, is updated from DDCS
V3.1 on software and hardware. It combines great advancement with tiny footprint of each days from
past 8 years, when we released the first DDCS products DDCS V1.1. After a very short time you will be
familiar with the functions and this manual will help you.
The DDCS numerical control system adopts the ARM+FPGA design framework. ARM controls the
human-computer interface and G-code analysis and the FPGA provides the underlying algorithms
and creates the control pulse. This guarantees reliable control and easy operation. The internal
operating system is Linux based.
The panel layout structure of the DDCS V4.1 is very rational to save space. All operations are
controlled by only 17 keys and the keys are composite keys that can act as function keys or numeric
keys. DDCS V4.1 support comprehensive Fanuc G code set.
The DDCS can be used for many styles and types of CNC machines. Lathes, Routers, Pick&Place
and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a
computer. This guarantees high precision, accuracy and reliability. The interface, even though very
comprehensive, can be learned in a very short time.
1.2 DDCS V4.1 Brief technical feature:
1) 18 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs.
2) The spindle can be configurated as Analog spindle(0~10V) and also Ser vo spindle.
3) 3-4 axes motor Control. Differential Mode and Double Pulse Mode output signal for optional,
Maximum interpolation pulse output frequency is 500Khz/Axis, 2-4 Axis linear interpolation, any 2
axis circular interpolation;
4) ARM9 main control chip,FPGA core algorithm chip.
5) 7 inches TFT screen, Size: 1024x600 Pixels, Resolution：72 Pixels/Inch; 17 operation keys.
6) The Power Supply for IO Port is 24VDC,minimum current is 0.5A, the Power Supply for Controller
system is also 24VDC,minimum current is 0.5A. Controller needs both power to work properly.
7) USB flash disk support for G code file input; Can transfer the files by Ethernet communication
between the computer and DDCS V4.1 controller; No size limited of the G-code file.
8) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam,
MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
9) Support standard MPG.
10) Support function o“f Try cutting” (handwheel guiding) function.
11）Support Jog function for each axis (continuous, step, defined distance), Customer can define
the distance.
12）Support Float Probe, Fix Probe, Vertex Probe and Tool Length Measurement.
13) Support the operation of quickly go to specify line and closest position.
14) Support Array Machining, Sequence Machining, Milling Plane Machining, and Milling sylindrical
machining.
15) Support Bias for XYZA axis, and can defind the Bias distance.
16) Support Pause breakpoint, Power-Cut Recovery Beakpoint and loaded breakpoint; And
Support Start from the specific line and closest line.
17) Support Multiple origin points operation， the users can create an origin point and load it.
18) Support Find Middle for X and Y axis.
19) Improved the simulation function. During the simulation, you can adjust the FRO and
observe whether the programming path meets the expectations and check the soft limits. During the
simulation, it can be paused, and when press the Start key again, the system will continue to simulate
from the pause breakpoint.
20) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.
21) Now English and Chinese language is avaliable; System also suppport International coding,
almost support all language, the users can add their own language to the control system.
22) DDCS V4.1 Only Supports NPN Type Limited Switch.
23) Support 4 kinds operation rights: visitor, operator, admin, super admin.
1.3 DDCS V4.1 New features compared to previous version:
1) Added USB port and Ethercat Port on DDCS V4.1.
2) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.
3) Added Servo Spindle option.
4) Add Polar coordinate programming commands and Rotation commands, and completed
Radius compensation commands on DDCS V4.1 controller.
5) DDCS V4.1 controller upgrades the motion algorithm, by Machining profile accuracy configuration,
makes a long g-code program with short line segments running smoother.
6) No matter how big program file it is, system can quickly active the function of Start from Specified
line and Start from closest point in few seconds.
7） Improve the simulation function. During the simulation, you can adjust the FRO and observe
whether the programming path meets the expectations and check the soft limits. During the simulation,
it can be paused, and when press the Start key again, the system will continue to simulate from
the pause breakpoint.
8） DDCS V4.1 added driver alarm input ports, and can configurate the ports No.as you want.
Same as DDCS-Expert.
9） We add cycle encoder for A axis, which is good for unlimited rotation for A axis.
10） Added the window for analysis prompt.
11） Suppport International coding, almost support all language, the users can add his language
for the control system.
12） Increased the Parameters about the acceleration when Estop, to avoid collision by Stop
when Estop the machine in high speed, edit the related parameters and system can give a smooth
stop, this means there is no position loss.
13) System FPGA cited 32 -bit speed generator, with higher resolution for the speed / acceleration,
it means higher positioning accuracy.
1.4 Appearance, Structure and Size of Product
The DDCS V4.1 is a small box that can fit in a window of a small control box or control cabinet.
Four locking hooks fix this controller from the frame. The dimension you find in Figure 1-3.
The front panel is 237 mm * 153.7 mm * 5.2 mm；
The main body is 237 mm * 153.7 mm * 48.2 mm；
To mount the unit in an equipment cabinet, cut the hole 228.5 mm * 83.7 mm.
Accessories: 1) The Wiring Board for DDCS V4.1 and DDCS V3.1； 2） DB37 Cable, for the wiring between the board and DDCS V4.1 controller, 3 meters; 3) USB Extension cable 50cm; 4) USB stick; 5) screws.
4 aixs Pendant Handwheelwith emergency stop
I. Pendant Handwheel with Emergency stop
Description:
1.The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100
selectable, You are bidding one complete unit of the MPG pendant with
Emergency stop for 4 axis CNC machine, it equipped with our popular
machined MPG unit with 4 axis and scale selector, LED indicator also
send feedback from the CNC machine to user about the status of the unit. 2.All Wiring isolated from MPG unit and provide a easy to install wiring
diagram, it suit both commercial machine as a replacement jog control
unit or other computer based controller. Which add great control
flexibility to the system. Specification: 1. x1, x10, x100 switch 2. X,Y,Z,4th axis selector switch 3. LED indicator 4. With Emergency stop 5. High quality professional chassis 6. 6ft extendable high quality shielded cable cord 7. Magnetic base holder can place anywhere on the machine steel surface 8. Required 5V+, 150mA, power for MPG 9. Phase output is A ,/A and B,/B; 10. TTL output, drive capability +-20mA; 11.Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series,
Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW,
8055I) and so on. 12.Wiring:User can wire this unit to the CNC system with easy. DDCS V4.1 MPG Wiring MPG handwheel interface is showed as figure 2-15. The users need to weld the MPG cables to the DB15 male parallel port, then plug into the controller DB15 female parallel port.
1 x 4 Axis CNC Motion controller (DDCS V4.1)
1 x 4GB USB Flash drive
1 x USB Extension Cable
1 x 4 Axis Pendant Handwheel with Emergency stop
2 x 75W 24V DC Power Supply
English manual will send to your email.
4 Axis CNC Motion controller (DDCS V4.1)
1.1 Introduction of Product
The DDCS V4.1 3-4 axes motion controller for stepper and servo system, is updated from DDCS
V3.1 on software and hardware. It combines great advancement with tiny footprint of each days from
past 8 years, when we released the first DDCS products DDCS V1.1. After a very short time you will be
familiar with the functions and this manual will help you.
The DDCS numerical control system adopts the ARM+FPGA design framework. ARM controls the
human-computer interface and G-code analysis and the FPGA provides the underlying algorithms
and creates the control pulse. This guarantees reliable control and easy operation. The internal
operating system is Linux based.
The panel layout structure of the DDCS V4.1 is very rational to save space. All operations are
controlled by only 17 keys and the keys are composite keys that can act as function keys or numeric
keys. DDCS V4.1 support comprehensive Fanuc G code set.
The DDCS can be used for many styles and types of CNC machines. Lathes, Routers, Pick&Place
and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a
computer. This guarantees high precision, accuracy and reliability. The interface, even though very
comprehensive, can be learned in a very short time.
1.2 DDCS V4.1 Brief technical feature:
1) 18 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs.
2) The spindle can be configurated as Analog spindle(0~10V) and also Ser vo spindle.
3) 3-4 axes motor Control. Differential Mode and Double Pulse Mode output signal for optional,
Maximum interpolation pulse output frequency is 500Khz/Axis, 2-4 Axis linear interpolation, any 2
axis circular interpolation;
4) ARM9 main control chip,FPGA core algorithm chip.
5) 7 inches TFT screen, Size: 1024x600 Pixels, Resolution：72 Pixels/Inch; 17 operation keys.
6) The Power Supply for IO Port is 24VDC,minimum current is 0.5A, the Power Supply for Controller
system is also 24VDC,minimum current is 0.5A. Controller needs both power to work properly.
7) USB flash disk support for G code file input; Can transfer the files by Ethernet communication
between the computer and DDCS V4.1 controller; No size limited of the G-code file.
8) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam,
MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
9) Support standard MPG.
10) Support function o“f Try cutting” (handwheel guiding) function.
11）Support Jog function for each axis (continuous, step, defined distance), Customer can define
the distance.
12）Support Float Probe, Fix Probe, Vertex Probe and Tool Length Measurement.
13) Support the operation of quickly go to specify line and closest position.
14) Support Array Machining, Sequence Machining, Milling Plane Machining, and Milling sylindrical
machining.
15) Support Bias for XYZA axis, and can defind the Bias distance.
16) Support Pause breakpoint, Power-Cut Recovery Beakpoint and loaded breakpoint; And
Support Start from the specific line and closest line.
17) Support Multiple origin points operation， the users can create an origin point and load it.
18) Support Find Middle for X and Y axis.
19) Improved the simulation function. During the simulation, you can adjust the FRO and
observe whether the programming path meets the expectations and check the soft limits. During the
simulation, it can be paused, and when press the Start key again, the system will continue to simulate
from the pause breakpoint.
20) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.
21) Now English and Chinese language is avaliable; System also suppport International coding,
almost support all language, the users can add their own language to the control system.
22) DDCS V4.1 Only Supports NPN Type Limited Switch.
23) Support 4 kinds operation rights: visitor, operator, admin, super admin.
1.3 DDCS V4.1 New features compared to previous version:
1) Added USB port and Ethercat Port on DDCS V4.1.
2) Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on main axes.
3) Added Servo Spindle option.
4) Add Polar coordinate programming commands and Rotation commands, and completed
Radius compensation commands on DDCS V4.1 controller.
5) DDCS V4.1 controller upgrades the motion algorithm, by Machining profile accuracy configuration,
makes a long g-code program with short line segments running smoother.
6) No matter how big program file it is, system can quickly active the function of Start from Specified
line and Start from closest point in few seconds.
7） Improve the simulation function. During the simulation, you can adjust the FRO and observe
whether the programming path meets the expectations and check the soft limits. During the simulation,
it can be paused, and when press the Start key again, the system will continue to simulate from
the pause breakpoint.
8） DDCS V4.1 added driver alarm input ports, and can configurate the ports No.as you want.
Same as DDCS-Expert.
9） We add cycle encoder for A axis, which is good for unlimited rotation for A axis.
10） Added the window for analysis prompt.
11） Suppport International coding, almost support all language, the users can add his language
for the control system.
12） Increased the Parameters about the acceleration when Estop, to avoid collision by Stop
when Estop the machine in high speed, edit the related parameters and system can give a smooth
stop, this means there is no position loss.
13) System FPGA cited 32 -bit speed generator, with higher resolution for the speed / acceleration,
it means higher positioning accuracy.
1.4 Appearance, Structure and Size of Product
The DDCS V4.1 is a small box that can fit in a window of a small control box or control cabinet.
Four locking hooks fix this controller from the frame. The dimension you find in Figure 1-3.
The front panel is 237 mm * 153.7 mm * 5.2 mm；
The main body is 237 mm * 153.7 mm * 48.2 mm；
To mount the unit in an equipment cabinet, cut the hole 228.5 mm * 83.7 mm.
Accessories: 1) The Wiring Board for DDCS V4.1 and DDCS V3.1； 2） DB37 Cable, for the wiring between the board and DDCS V4.1 controller, 3 meters; 3) USB Extension cable 50cm; 4) USB stick; 5) screws.
4 aixs Pendant Handwheelwith emergency stop
Description:
1.The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100selectable, You are bidding one complete unit of the MPG pendant with
Emergency stop for 4 axis CNC machine, it equipped with our popular
machined MPG unit with 4 axis and scale selector, LED indicator also
send feedback from the CNC machine to user about the status of the unit. 2.All Wiring isolated from MPG unit and provide a easy to install wiring
diagram, it suit both commercial machine as a replacement jog control
unit or other computer based controller. Which add great control
flexibility to the system. Specification: 1. x1, x10, x100 switch 2. X,Y,Z,4th axis selector switch 3. LED indicator 4. With Emergency stop 5. High quality professional chassis 6. 6ft extendable high quality shielded cable cord 7. Magnetic base holder can place anywhere on the machine steel surface 8. Required 5V+, 150mA, power for MPG 9. Phase output is A ,/A and B,/B; 10. TTL output, drive capability +-20mA; 11.Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series,
Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW,
8055I) and so on. 12.Wiring:User can wire this unit to the CNC system with easy. DDCS V4.1 MPG Wiring MPG handwheel interface is showed as figure 2-15. The users need to weld the MPG cables to the DB15 male parallel port, then plug into the controller DB15 female parallel port.
2 x 75W 24V DC power supply
Shipping 1 - Items Ship from Jenec,CZ only to e B a y ADDRESS . Package handling only takes 1 business day at our EU warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by phone or leave a ebay note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day. 2
- If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item. 3
- International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4 - Orders placed on weekend will be shipped within 2 days. 5
- We have warehouse in EU, Ukraine, RU, USA, so that we can ship to the EU, Ukraine, RU, USA clients very fast via DE-DHL, IML, UPS.
Shipping 1 - Items Ship from Jenec,CZ only to e B a y ADDRESS . Package handling only takes 1 business day at our EU warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by phone or leave a ebay note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day. 2
- If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item. 3
- International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4 - Orders placed on weekend will be shipped within 2 days. 5
- We have warehouse in EU, Ukraine, RU, USA, so that we can ship to the EU, Ukraine, RU, USA clients very fast via DE-DHL, IML, UPS.
1 - Items Ship from Jenec,CZ only to e B a y ADDRESS . Package handling only takes 1 business day at our EU warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by phone or leave a ebay note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day. 2
- If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item. 3
- International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4 - Orders placed on weekend will be shipped within 2 days. 5
- We have warehouse in EU, Ukraine, RU, USA, so that we can ship to the EU, Ukraine, RU, USA clients very fast via DE-DHL, IML, UPS.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4
Return 1 - All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation 2
- Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 3
- We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. 4
- We reserve the rights to refuse any returns for objective reasons.
Payment - We accept Pay pal payment only.
- Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
- We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
- 1
- All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation 2
- Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 3
- We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. 4
- We reserve the rights to refuse any returns for objective reasons.
Payment - We accept Pay pal payment only.
- Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
- We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
- Condition: New
- Input voltage: 24V
- Output power: 0-10V
- Screen: 7 Inch TFT screen
- Frequence: 500Khz
- Weight: 1KG
- Name: 4 Axis 500KHz Stepper Motor Servomotor Controller
- Brand: RATTM MOTOR
- size: 237x 153.7 x48.2 mm
- Motor Type: Stepper Motor/ Servo Motor
- Apllication: Milling Router machine
- Model: DDCS V4.1
- Handle Model: 1469 Series
- Country/Region of Manufacture: China
PicClick Insights - 【EU】DDCSV 4.1 Cnc Offline Controller 4 Axis Offline Control 500Khz+24V DC Power PicClick Exclusive
- Popularity - 0 watchers, 0.0 new watchers per day, 96 days for sale on eBay. 1 sold, 5 available.
- Best Price -
- Seller - 365+ items sold. 5.5% negative feedback. Good seller with good positive feedback and good amount of ratings.
People Also Loved PicClick Exclusive
【 UK 】CNC 4 Axis Stand Alone Offline Motion Controller DDCS V3.1 500KHz G-Cod
£198.00 Buy It Now 22h 58m
〖EU〗CNC 4 Axis DDCS V3.1 Stand Alone 500KHz Offline Motor Motion Controller 24V
£218.00 Buy It Now 16d 0h
EU｜The Latest DDCSV 4.1 Cnc Independent Controller 4 Axis Offline Control 500Khz
£313.00 Buy It Now 25d 19h
「EU」 CNC 4 Axis Motion Controller 1000Khz Off-line Stand Alone DDCS Expert PLC
£373.00 Buy It Now 13d 23h
EU｜CNC 4 Axis DDCS V3.1 Stand Alone 500KHz Motor Motion Controller+MPG Handwheel
£255.00 Buy It Now 8d 0h
2 watchers『EU』DDCSV4.1 CNC Controller System 4 Axis PLC Offline Stand-alone+ MPG Handwheel
£320.00 Buy It Now