If the instrument cluster fails while driving, then this will often cause the engine to cut out. If failure happens while attempting to start the vehicle then it will prevent the engine from starting. You will notice the immobilizer light flashes continuously when the instrument cluster fails and the mileage reading will only show dashes (-------) instead of the mileage.Often the instrument cluster will fail completely and will stay that way, leaving you with a non starting car.
Loss of all instrument cluster functions and lights Speedometer, temperature and rev counter drops to zero
Engine cuts out while driving
Non start
Immobiliser light flashes
Mileage shows dashes
Erratic gauges
P1260 - Theft Detected
U0121 - Lost Comms With ABS
U0140 - Lost Comms with Body Control
U0001 - High Speed CAN Communication BUS
U1900 - CAN BUS Fault
U2012 - CAN Communication Error
P0500 - Vehicle Speed Sensor
U0001 - High Speed CAN Communication BUS
P1260 - Theft Detected Vehicle Immobilised
U0155 - CAN Data from Hybrid Electronic Cluster Module Not Received By TCM
U0001 - High Speed CAN Communication BUS
U0101 - Lost Communication with TCM
P0106 - Manifold Absolute Pressure /Baro Sensor Range Performance
P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input
P1000 - OBD II Cycle Not Completed
U1900 - CAN Communication BUS Fault - Receive Error
U2510 - CAN Invalid Data for Vehicle Security
U2197 - Invalid Vehicle Speed Data
U2200 - Invalid ODO Count Data
U0155 - Engine ECU Lost Communication with Instrument Cluster
Please note before sending the unit to us all the above common faults can be caused by the other modules ,wiring harness or fuse boxes and you'll have to do all the checks in order to avoid disappointment
Some of the other common faults: front under bonnet fuse box water damaged, BCM pins corroded, Ecu pins corroded, faulty ecu.
Please enclose a note with your eBay buyer Id or order Nr