PWM 60A control of power generator hho kit hydrogen with Detection automatic

PWM 60A control of power generator hho kit hydrogen with Detection automatic The description of this item has been automatically translated. If you have any questions, please feel free to contact us.

PWM 60A FOR HHO generator control con Automatic detection power . Designed to control up to 60 A 12 / 24V DC . con voltmeter and ammeter 60 A 12 / 24V DC . con voltmeter and ammeter Our products are designed and produced within the European Union in our company or partner in compliance with technical standards and the industrial production of such products. One of the main and most important components of a good system HHO is the PWM (Pulse Width Modulator). This small electronic circuit Control Board controls the electric current flowing through the system HHO and regulates the flow so that the best possible hydrogen is produced and the maximum fuel savings are achieved. If your HHO generator will need to run any of our PWM60A for better control of the amperage, prevent the system from overheating and having more HHO gas emissions. This is one of the most important gadget in your HHO system. Keeps the correct gas/water ratio to make your engine run smoothly and efficiently from the current button rapidly on and off. This prevents overheating of the HHO generator and keeps things manageable temperature. The PWM60A is designed for a HHO system feeder without relay or collect the signal from the alternator/power key to make the system more safe to use and easy to install. PWM60A new works based on the voltage of the car/vehicle: -Motor stopped-car/truck voltage 12V or 24V-PWM does not work; -Engine-car/truck voltage < span class = notranslate ' > </span> V or 13.8 < span class = notranslate ' > </span> 27.6 V-PWM works.   PWM60A automatic detection when the car engine is running and will automatically switch on HHO system, without further requirements. The device will turn off automatically when the car engine is turned off or is not running. The device is also able to control a water level sensor inserted in the tank turning the system off when the level drops below a certain point. Has built-in ammeter and VOLTMETER in the front panel, in order to allow for better regulation of the system.   What are the main benefits? Efficiency: HHO generators will run cooler than standard linear amplifiers, requires substantially less heat dissipation mass; Ampere control: control the amperage enter the generator will be very easy to do. The ability to check the amperage keeps the cell operates at temperatures fresh and prolongs the life of the cell, while increasing the production of H2. Installation: it will make the HHO system easier and safe to install and use because there will be no need to relay or collect the signal from the alternator/power key as in other market PWM.   Technical specifications • Direct connection from battery input HHO generator CELL, no external relays; • 60A MAX power supply cell HHO; • Automotive fuse 60A outside; • Double LED: voltmeter + ammeter meter, from 5 to 40 V, 60 A; • Automatic battery voltage Detection and autoconfiguration for: + 12V/+ 24V; • Quad operational Chip sensor with 1% Tolerance Zenner voltage detector; • Automatic ignition HHO while the engine is running; • 1 Second PWM control delay, after detecting engine; • Automatic shutoff HHO when the motor is switched off; • soft start power PWM maximum ampere out; • integrated trimmer power supply 0-100% PWM control: HHO; • Logic IC Sensor; • 4-way integrated power barrier: positive, Gnd, CELL-OUT, CELL + OUT; • Optional integrated sensor switch water tank in the system; • Compact black plastic cabinet + aluminum heat sink for the 60th Mosfet; • Dimensions: 110X85X40 mm.   The PWM60A kit includes the following items: Device • 1 Pcs PWM60A Detection Auto Power; Fuse • 1 PC Automotive exterior 60A; • 1 red wire, diameter 50 cm Pcs < span class = notranslate ' > </span> 0.5 mm for feeding device directly from the battery; • 1 black wire, diameter 50 cm Pcs < span class = notranslate ' > </span> 0.5 mm for feeding device directly from the battery; • 4 PCs yellow crimp terminal; • 2 pieces Wrapper.

  SALE NOT SUBJECT to VAT UNDER ARTICLE < span class = notranslate ' > 1.2 </span>, P.r.decree 26:10/1972 N63 3e5 and NEXT, and MODIFICATIONS 

EAN	0670541159088

• Condition: New
• Brand: Unbranded
• EAN: 0670541159088

See More