The difference lies in the details
The Westinghouse Jet I ceiling fan is one of our comfortable as well as simple models. The housing surface made of brushed nickel and 3 attached reversible blades in wengue and silver give the Jet I its clear and modern contours.
A high quality and virtually silent AC motor made of cold-rolled steel ensures comfort throughout the year: a comfortable cool climate in summer and optimum heat distribution during winter operation.
Can be equipped with either a remote control or a wall switch.
Recommended for rooms up to 15 sqm
CHARACTERISTICS
DESIGN
ASSEMBLY
EFFICIENCY
GUARANTEE
Blade Material | MDF |
Primary Blade Finish | Wengue |
Secondary Blade Finish | Silver |
Blade Pitch (in degrees) | 14 |
Bulb(s) Included | N |
Motor | Cold Rolled Steel Motor 153mm x 12mm |
Capacitor Type | Dual |
Mount Type | **Down Rod Only |
Motor Housing | Brushed Nickel |
Reverse Airflow | Y |
Switch Housing Cap Included | N |
A) Top of Canopy to Bottom of Blade (cm) | 18 |
B) Top of Canopy to Bottom of Switch House (cm) | 29 |
C) Top of Canopy to Bottom of Canopy (cm) | 6 |
D) Width of Motor Housing (cm) | 17 |
E) Width of Canopy (cm) | 13 |
CFM (High) | 124 |
Watt (High) | 47 |
RPM (High) | 218 |
Amp (High) | 0.21 |
Certification | CE/GS/RoHS |
Fan Width (inches) | 42 |
Fan Size (cm) | 105 |
Installation Clarification
* Dual Mount System - These versatile ceiling fans may be installed with or without the extension drop rods included in the packaging. This flexibility allows you to install the fan either close to the ceiling or at a lower level in rooms with higher ceilings.
** Drop Rod Only - Drop Rod ceiling fans must be installed with the Drop Rod supplied, you may replace the drop rod with rod's having a length of either 12" or 18". The option for a 12" or 18" Drop Rod varies for each model.
*** Hugger - Specially designed for rooms with lower ceilings, hugger fans can not be installed with a down rod.