Versa Traction clear DECK grip tape for a wake skim surf boards RRP$95

£48.97 Buy It Now, £15.49 Shipping, eBay Money Back Guarantee
Seller: rileybalsa1234 ✉️ (1,174) 96.2%, Location: Miranda. Sydney, NSW, AU, Ships to: WORLDWIDE, Item: 154461372013 Versa Traction clear DECK grip tape for a wake skim surf boards RRP$95 .

Versa Traction clear DECK grip tape for a wake board or wake surfer

Peel ‘n’ Stick Clear Traction Grip Great for Surfboards, SUP’s, Wake Skates and skim boards and more.

You are bidding on - 4 pieces for any type of board.  Each piece is 280mmx280mm - with all 4 pieces put together it will give you a total surface area of 560mmx560mm plus a spacing of around 5mm

Made from a patent-pending textured space-aged composite surface.

It is engineered to provide outstanding anti-slip properties in both wet and dry conditions.

All traction can be trimmed to fit if necessary.

There is now no need to put toxic wax on your boards and mess up your board bags.

This will also save you money and keep your board looking great.

Now available for short boards, longboards, stand ups , fishes, mini mals etc.

Can be used for boat decks also.

These are so thin (maybe 1mm) will not create any drag in the water.

Paddle grips are 90mm wide - you can split these down the middle and use as rail tape for your stand up board.

Packs can be split if required

Replacement pieces are also available

Features -

Is not black foam so is not going to get hot to stand on in the sun

Waxless surfboard traction

No Rash

Clear grip tape

Replaces wax

Wax may still be applied

Any hot water or air temperature will not affect this

No melting wax

No dirty board bags

No need to buy more wax

Lighter than heavy wax build up

No sand sticking to your wax

Protection of your board

No lumpy wax sections

Cheaper than wax

Lighter than wax

Durable, reliable everytime and anywhere around the world

2-year warranty and 1-year adhesive warranty

You must make sure your board is clean and dry before adhering your traction pads

Used By Pro Surfer Sunny Garcia and Chris McCormack Hawaiian Iron Man Champion 2 times and Mark Riley

Free Sticker

SIZING

Here are the sizes – these can be trimmed with scissors or Stanley knife – they would normally have a spacing of 1/8” or 3mm up to ½” or 12mm see the attached diagrams.

Fish –  Actual sizing of grip - length 1800mm or 5’11” Width 505mm or 20”

Maximum size board - length 2100mm or 7’0” Width 570mm or 22 ¾ ”

Fun board/Mini mal -  Actual sizing of grip - length 2350mm or 7’9” Width 520mm or 20 ½ ”

Maximum size board - length 2575mm or 8’7” Width 585mm or 23 ¼ ”

Short board – needs a tail pad maybe an enviro cork one 

Actual sizing of grip - length 1030mm or 40 ½ ” (centre) length 1170mm or 42 ” (outside near rail) Width 470mm or 18 ½ ”

Maximum size board - length 2250mm or 7’6” Width 535mm or 21 ¼ ”

Longboard -  Actual sizing of grip - length 2200mm or 8'6 ½” (centre) Width 560mm or 22”

Maximum size board - length 2700mm or 9’0” Width 590mm or 23”

So the nose length is 22” or 560

2nd section 15” or 380mm

3rd section 23” or 590mm

Tail section 26” or 670mm

Stand – up paddle grip -  Actual sizing of grip - length 410mm or 16 ½” Width 90mm or 3 1/2”

suitable to protect your rail of your paddle board also

Wake boards - Each piece is 280mmx280mm - with all 4 pieces put together it will give you a total surface area of 560mmx560mm plus a spacing of around 5mm

FREE DELIVERY FOR THE SECOND AND THIRD UNIT

https://www.youtube.com/watch?v=YdMtRWiZuBc

https://www.youtube.com/watch?v=xbqr-XTcZ30

https://www.youtube.com/watch?v=CaguTtZNjBo

https://www.youtube.com/watch?v=XoDjmFcTfEw

https://www.youtube.com/watch?v=MheiSbsaUkg

https://www.youtube.com/watch?v=A7mmXsH9ciU

https://www.youtube.com/watch?v=BVWhk34Xi0Q

FOR MORE INFO GO TO 

[link removed by eBay]

  TESTIMONIAL   

Dear riley balsa,   hi again ..

really happy with the grip -

grip works well -

have a good one -

 ..jimbo..

Plus delivery or Pick up Miranda 2228

Pick up $0

Australian shipping $15

Europe shipping $25

Rest of the world shipping $20

WAX REMOVAL

Soften it up in the sun or with some warm water and scrape it off with a plastic flat wax comb (or piece of balsa) and then wipe it off with a rag and mineral turps and clean up with a soft clean dry t-shirt.

When applying, I found it best to start from the stringer (get someone to help you – with clean dry hands) - position the grip up to the location you want then working your way outwards towards the rails (preventing air pockets along the way). This I found to be best (better than horizontal - down the board application) for a bilateral symmetrical placement either side of the stringer. Also don't hold onto the adhesive for too long as it will come off on your finger & thus affect adhesion in that part of the grip.

Perfect for -

Surfboards

Skim boards

Foam boards

Learner boards

Surf Schools

Body boards

Tow boards

Rescue boards

Stand up paddle boards

Paddle boards

Wake boards

Row boats

Timber boat and fibreglass decks

Baths

Swimming Pools

 TRACTION GRIP INSTALLATION PROCEDURE:

 1. Thoroughly clean, removing all wax, dirt, oil and grease from surface area where you will be applying your VGT Traction products. For best results apply a non-oil based solvent such as mineral spirits, paint thinner, or denatured alcohol to remove any residue. Repeat process if residue persists. Rub down with dry cloth and let dry completely. DO NOT USE SURF WAX REMOVER SOLVENTS THEY LEAVE A RESIDUE THAT DOES NOT ALLOW VT ADHESIVE TO STICK TO SURFBOARDS.

 2, Lay the tape on the board and position it to suit. Use some masking tape to hold in position. Use a pencil to mark where you want to trim it. Leave it partially taped and trim it with some sharp scissors.

 3. Unpeel the protective backing paper, exposing adhesive. Carefully place exposed adhesive edge to stringer, and let it roll down using your finger to gently pass parallel with stringer then press down firmly.

 4. Make sure that you try to eliminate as many air bubbles as possible by smoothing down product onto surface while applying.

 5. If you have any air bubbles - use a pin to pop them and push the bubble out.

 6. Maximize traction by cleaning entire surface with Cleaning agent like jif (non-abrasive cleanser) and water-using a soft scrub brush.

 TESTING

 ANTISLIP TESTING HAS BEEN CARRIED OUT ON VERSA TRACTION TO AUSTRALIAN STANDARDS BY CSIRO in Australia

 

  • Condition: New
  • Colour: Clear
  • MPN: 345634535
  • Brand: versa traction
  • UPC: 074390393936

PicClick Insights - Versa Traction clear DECK grip tape for a wake skim surf boards RRP$95 PicClick Exclusive

  •  Popularity - 8 watchers, 0.0 new watchers per day, 1,044 days for sale on eBay. Super high amount watching. 1 sold, 9 available.
  •  Best Price -
  •  Seller - 1,174+ items sold. 3.8% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive