Lemon RX 7 Channel Gen 2 Receiver Telemetry Stabiliser VARIO Voltage Probe DSMX WILL BEAT ANY PRICE - Message for details.

£27.99 Buy It Now, £2.50 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: root729 ✉️ (17,869) 99.8%, Location: Colchester, Essex, GB, Ships to: WORLDWIDE, Item: 266033160833 Lemon RX 7 Channel Gen 2 Receiver Telemetry Stabiliser VARIO Voltage Probe DSMX. Generation 2  Lemon RX DSMP 7 Channel Receiver with Telemetry with VARIO and 6 Axis Stabiliser with Voltage Probe and Diversity Antenna ( Fully DSMX and DSM2 Compatible. ) Original UK Seller. If you find this, or any of our items at a lower price, please message us and we will offer you a discount and update our listing. The generation 2 DSMP 7-channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance.
- DSMX / DSM2 compatible, 7-channel full-range telemetry stabilizer with full telemetry features including a built-in barometer, altimeter, energy meter (Current, Voltage, mAh),  and internal temperature sensor
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application - BEC1 and BEC2 dual inputs allow high-reliability operation while improving setup for high current drain performance servo - Built-in Detla, V-tail and Normal Wing mixer - Supports stabilization with separated channel dual aileron operation - Stabilization always-on feature allows 6 usable channels on a 7-channel receiver - Real-time variable stabilization gain control on channel 8 - All-channel failsafe
- Firmware health monitoring software stack and ultra-low operational voltage (3.6V) ensure the highest hardware reliability
- Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience - Antenna diversity improves the reliability of the wireless link  - Satellite port for additional signal diversity - Gyro stabilization activation with either AUX2 or Gear channel - 3 potentiometers for individual gain tuning

See below for full specs.

VERY popular and considered more reliable and longer range than similar brands. We bring the FULL PRODUCT RANGE from Lemon RX so if what you need is not listed please contact us to find out if we have it.

UK stock, Same day dispatch when payment is received by 2pm. Signed for and special delivery available at checkout (add to basket).

Buy with Confidence, please see our feedback from over 45,000 sales which shows all our stock is 100% genuine and we pride ourselves on our service. Genuine UK seller unlike some with returns to China ! Feel free to contact us to confirm.

Thank you for looking please contact me with any questions about this item or suggestions for UK stock etc.

Please see my other items - HERE

Product Specifications
Dimension:
55mm x 15mm x 23mm
Recommended voltage range:
3.9V to 8.5V (2S LiPo capable)
Telemetry Option:
Integrated with Barometer, Altimeter, Energy meter (Require V/I sensor) and Internal Temperature Sensor
Technology:
DSMP with GEN2 SDR stack (DSMX / DSM2 compatability)

Highlight
The generation 2 DSMP 7-channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance.
- DSMX / DSM2 compatible, 7-channel full-range telemetry stabilizer with full telemetry features including a built-in barometer, altimeter, energy meter (Current, Voltage, mAh),  and internal temperature sensor
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application - BEC1 and BEC2 dual inputs allow high-reliability operation while improving setup for high current drain performance servo - Built-in Detla, V-tail and Normal Wing mixer - Supports stabilization with separated channel dual aileron operation - Stabilization always-on feature allows 6 usable channels on a 7-channel receiver - Real-time variable stabilization gain control on channel 8 - All-channel failsafe
- Firmware health monitoring software stack and ultra-low operational voltage (3.6V) ensure the highest hardware reliability
- Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience - Antenna diversity improves the reliability of the wireless link  - Satellite port for additional signal diversity - Gyro stabilization activation with either AUX2 or Gear channel - 3 potentiometers for individual gain tuning Quick Reference Guide Reset stabilizer
- Connect power - Hold F and B buttons (approximately 5 secs+) until all LED flashes randomly - Press the C button. Multiple LEDs flash a few times to complete the operation
Bind with bind plug - Insert bind plug on Channel 7 - Connect power
Bind without bind plug - Connect power - Hold the B button until the red LED flashes
Bind with a satellite without a bind plug - Connect power - Hold the B button until the red LED flashes - Disconnect power - Plug the satellite wire connector into the stabilizer - Connect power
Failsafe - Connect power to the receiver and ensure the servos are working with the transmitter - Press the F button for 3 seconds until green changes from off to on and vice versa to change the failsafe setting. Channel value is saved as failsafe default at the time the green LED turns on.  - Turn off the transmitter and wait 2 seconds to ensure the failsafe is activated accordingly by ensuring there is torque generated with finger-pushing the servo linkage if it was to be set. Vice versa.
Stabilization activation switch - Disconnect power - Insert bind plug to channel 5 - Hold the C button - Connect power. Wait for about 1 second until the 6 LEDs flash.
- Release the C button - Press C to make changes within 3 seconds. Green = CH7, Blue = CH5. - Wait for 3 seconds and remove the bind plug
Wing Mode and Dual Aileron
- Disconnect power - Insert bind plug to channel 6 - Hold the C button - Connect power. Wait for about 1 second until the 6 LEDs flash - Check the receiver label/user manual to understand the referred LEDs' operation  - Release the C button - Observe which red LED is flashing and brief press C to select the required mode - Press C to toggle between settings. On means selected. Exit automatically in 5 seconds. - Wait for 3 seconds and remove the bind plug - Ensure transmitter mixing is set accordingly for dual aileron if stabilized dual aileron is to be configured.
Gyro direction - Check the receiver  label/user manual to understand the referred LEDs' operation
- Connect power and wait 1 second  - Hold the C button and wait for about 1 second until the 6 LEDs flash - Release the C button - Observe which red LED is flashing and brief press C to select the required mode - Press C to toggle between settings. On means selected. Exit automatically in 5 seconds. - Wait for 3 seconds and remove the bind plug.
V/I sensor calibration - Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration. - Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.  - Press the button for 2 seconds but no greater than 5 seconds - Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor. - Press F or C button - Observe 3 red LED flashes - Turn on the DC loading device by throttling the transmitter. Ensure 4A is drawing across the V/I sensor. Be careful with the motor spinning if it is to be used.
- Press the B button to save and exit.
V/I probe calibration - Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration. - Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.  - Press the button for 2 seconds but no greater than 5 seconds - Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor. - Press F or C button - Observe 3 red LED flashes - Press the B button to save and exit.
Gain setting - Adjust via the 3 dials or real-time master gain on channel 8 depending on the transmitter channel's availability.   View setting LEDs with all on - Press the C button briefly (no more than 2 seconds).

Note:

1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.


2) This is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.


3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spketrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).

The Spektrum, DX5, DX6, DSMX, and DSM2 brand is a trademark as well as or is the ownership of Horizon Hobby, Inc.

  • Condition: New
  • Brand: lemonrx
  • Non-Domestic Product: No
  • Custom Bundle: No
  • MPN: LM0086VP
  • Modified Item: No

PicClick Insights - Lemon RX 7 Channel Gen 2 Receiver Telemetry Stabiliser VARIO Voltage Probe DSMX PicClick Exclusive

  •  Popularity - 82 watchers, 0.2 new watchers per day, 476 days for sale on eBay. Super high amount watching. 291 sold, 10 available.
  •  Best Price -
  •  Seller - 17,869+ items sold. 0.2% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive