Seller:hobbiesandhandicrafts13✉️(68,221)98.9%,
Location:Bocking, Essex, GB,
Ships to: GB & many other countries,
Item:161820676654Matchstick Modelling Kits Various.
Matchbuilder - 1920's Omnibus A delightful reminder of the 1920's public transport. This double decker
open top bus served the public well. Unfortunately, in adverse weather,
those travelling on the top deck had only a mackintosh sheet to pull up
as protection from the rain. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers
Matchbuilder - Tram Kit This particular Tram Car journeyed between Ealing and Hammersmith in the
early 1900's. Power was fed by an electrical system through a conductor
pole mounted on the top deck. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers
Matchbuilder - Fire Engine A vehicle which has always had an appeal, this model was typical of the
early 1900's. It had escape ladders that were manhandled and a rear
centrifugal pump powered from the engine. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers
Matchbuilder - Traction Engine This Fairground Tractor was a means of supplying lighting and
electricity to fairgrounds throughout the country. It was a means of
transport towing caravans and equipment from one site to another. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers.
Matchbuilder - Express Loco & Tender This Western Region 4 cylinder loco was a fine example of railway
engineering. The tender stored 4000/5000 gallons of water, 34 tons of
which was converted into steam on a journey from London to the West
Country. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers.
Matchbuilder - Hispano Suiza Powered by a 6 cylinder overhead camshaft engine, this model was
developed in France by the Swiss engineer, Marc Birkigt, and later
constructed in Spain. Cars of this type were popular among the elite of
this era. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers.
Matchbuilder - Wagonette The Wagonette, a simple yet useful vehicle, became popular from the mid
19th Century onwards. The rear inward facing seats could take four or
six passengers and were made to fold up to make space for luggage or
goods. Some models were fitted with two half doors at the rear. Kit includes - • Matches• Glue• Step-by-step instructions• Carboard formers.
Matchbuilder - Hay Wain The 'Hay Wain' or farm wagon varied in its basic shape from country to
country and was pulled by one or two large horses depending on load.
This model was typical of those found in the South of England in the
early 1800's and used for lighter loads such as hay or straw. Kit includes - • Matches • Glue • Step-by-step instructions • Cardboard formers.
Dutch Windmill Kit contains: •Matchsticks •Cardboard cut-out formers •Glue •Full Instructions •Matchcraft Safety Cutter. Overall size of finished model: 368mm high x 140mm wide
Big Ben Kit contains: •Matchsticks •Cardboard cut-out formers •Glue •Full Instructions •Matchcraft Safety Cutter. Overall size of finished model: 114mm x 89mm x 445mm high.
Tower Of Pisa Kit contains: •Matchsticks •Cardboard cut-out formers •Glue •Full Instructions •Matchcraft Safety Cutter. Overall size of finished model: 356mm high, x 89mm diameter
Arc De Triomphe Kit contains: •Matchsticks •Cardboard cut-out formers •Glue •Full Instructions •Matchcraft Safety Cutter. Overall size of finished model: 191mm high, x 191mm wide, x 64mm deep
Fire Engine & Ladder Kit contains: •Matchsticks •Ready-made coloured wheels •Cardboard cut-out formers •Axle Pins •Wire •Glue •Full Instructions Overall size of finished model: 300mm long x 100mm high x 150mm wide.
Horsedrawn Fire Engine Kit contains: •Matchsticks •Ready-made coloured wheels •Cardboard cut-out formers •Axle Pins •Wire •Glue •Full Instructions Overall size of finished model: 212mm long plus shafts; x 106mm wide x 162mm high.
Mary Rose Kit contains: •Matchsticks •Cardboard cut-out formers •Stickers •Glue •Full Instructions Overall size of finished model: 406mm long x 140mm wide x 318mm high.
Coliseum Clock Kit contains: •Matchsticks. •Pre-cut cardboard shapes •Glue. •Clock Movement •Dial and Hands •Full Instructions Approx size of finished model: 130mm deep; 243mm wide; 292mm high Matchmaker - Bicycle Clock Kit Kit contains: Matchsticks. Acetate sheet. Glue. Clock mechagnisms, face, hands, hinge and brass knob.
Matchmaker - 17Th Century Cannon Kit contains: •Matchsticks. •Cardboard cut-out formers. •Glue. •Full Instructions.Approx size of finished model: length 317mm. Matchmaker - Citroen 2CV Kit contains. Matchsticks. Cardboard cut out foam. Glue. Full instructions. Approx size of finished model: 280mm long, 140mm high, 120mm wide.
Matchmaker - Riverboat Kit contains: •Matchsticks. •Cardboard cut-out formers. •Glue. •Full Instructions.Approx size of finished model 380mm long, 225mm high;
Matchmaker - Chinese Junk Kit contains: •Matchsticks. •Cardboard cut-out formers. •Glue.• Full Instructions.Approx size of finished model 300mm long, 270mm high
Matchmaker - Loco Kit Kit contains: •Matchsticks. •Cardboard cut-out formers. •Glue. •Full Instructions.Approx size of finished model 330mm long, 102mm wide; 190mm high