Shaver socket provides direct power supply for other devices e.g. shaver, toothbrush. Supply voltage is 230V. Shaver socket can be installed only with IP44 certified mirrors. Dimensions: 7,5x2,8cm. Shaver socket is installed on the right side of the mirror, near the bottom edge.
We recommend mirrors with IP44 standards. Especially if the mirror might have contact with splashing water. IP44 mirror has a closed back.
Sensor switch turns the illumination on when detects movement within 5cm. Once the illumination is turned on, another detected movement turns it off. To ensure proper work of the sensor, there must be no other object placed within 20 cm from the sensor, e.g. the sensor cannot be placed too close to a wall. In the case of purchasing a mirror with a demister, the sensor switch works for the mirror illumination only. The demister is connected to a separate power supply. The accessory is placed on the right, by the bottom edge of a mirror.
Prevents the mirror from fogging up. Supply voltage is 230V. In the case of purchasing a mirror with a demister and a touch/sensor switch, the switch works for the mirror illumination only. The demister is connected to a separate power supply. The demister can be connected directly to mains (works constantly).
Displays time (24-hour mode) and date (day, month, year) interchangeably. Supply voltage is 12V. The clock is permanently supplied, which means it stays lit up continuously. The clock measure is 50x20mm. Digital Clock is installed in the middle of the mirror near bottom edge.